Heat transport and void fraction in granulated debris

The paper discusses the boiling heat transfer from a porous bed with internal heat sources and refers to the configuration in a nuclear reactor after a partial core melt. The flow of coolant, the temperature and the local liquid/vapor distribution were investigated in a two-dimensional configuration. Experiments were conducted using monodisperse beds as well as a mixture of two different particle sizes with a total porosity below 20%. In some tests the bed was supported by a shell of porous material to create a gap along the bottom of the test container. Water was used for tests up to 9% of the critical pressure, while other tests were made with R134a up to 44% of the critical pressure. The maximum heating rate realized inductively was 730 kW/m². The experiments have been compared to analytical results with a one-dimensional approach.It is shown that in contrary to the situation in small cylindrical configurations the heat transfer was increased by large buoyancy driven convective flows. If there was a gap along the container bottom an additional flow of liquid improved the coolability of the bottom region even if the upper part of the particle bed was already overheated. In case of high density ratios (water at low pressure), the measurements indicated a strong enhancement of the coolant flow above a certain minimum heating rate resulting in decreasing vapor fraction values which were nearly independent of the system pressure. This was assumed to be caused by the appearance of vertical channels through which the vapor could flow through the particle bed.     

Implementation of sustainable sanitation in existing urban areas: long-term strategies for an optimised solution.

If technologies for decentralised sanitation and reuse (DESAR) and for natural stormwater management should at least partially replace existing systems, then intensive reconstruction work becomes essential. A conversion can only be realised successively over a long period due to high construction and financial expenses and requires new strategies. This paper presents the development and practical implementation of a mathematical tool to find an optimised strategy for the realisation of alternative and more decentralised drainage and sanitation concepts in existing urban areas. The succession of construction measures (e.g. the implementation of decentralised greywater recycling) for the whole period of consideration is determined based upon a mathematical optimisation model on the condition that the favoured future state is known. The model describes the complex interdependencies of the urban water and nutrient cycle and enables the minimisation of both financial efforts and ecological impacts on the way toward the future state. The results of the implementation for a rural area in Germany show that the mathematical optimisation is an adequate instrument to support decision-making processes in finding strategies for the realisation of sustainable urban water management.     

Learn to Design Attractive Web Sites

A review of The Principles of Beautiful Web Design by Jason Beaird. The book aims to cover the demand to build Web sites by targeting designers who want to learn how to make Web sites look more attractive.     

Semantic Web Mining: State of the art and future directions

Semantic Web Mining aims at combining the two fast-developing research areas Semantic Web and Web Mining. This survey analyzes the convergence of trends from both areas: More and more researchers are working on improving the results of Web Mining by exploiting semantic structures in the Web, and they make use of Web Mining techniques for building the Semantic Web. Last but not least, these techniques can be used for mining the Semantic Web itself.The Semantic Web is the second-generation WWW, enriched by machine-processable information which supports the user in his tasks. Given the enormous size even of today’s Web, it is impossible to manually enrich all of these resources. Therefore, automated schemes for learning the relevant information are increasingly being used. Web Mining aims at discovering insights about the meaning of Web resources and their usage. Given the primarily syntactical nature of the data being mined, the discovery of meaning is impossible based on these data only. Therefore, formalizations of the semantics of Web sites and navigation behavior are becoming more and more common. Furthermore, mining the Semantic Web itself is another upcoming application. We argue that the two areas Web Mining and Semantic Web need each other to fulfill their goals, but that the full potential of this convergence is not yet realized. This paper gives an overview of where the two areas meet today, and sketches ways of how a closer integration could be profitable.     

CAMS dirigiert die eGK

Die elektronische Gesundheitskarte (eGK) bietet viele neue M?glichkeiten für eine vernetzte, effiziente Gesundheitsversorgung. Komplexe ≫Card and Application Management Systeme≪ (CAMS) gew?hrleisten im Hintergrund Funktionsf?higkeit und Sicherheit — von der Ausgabe der Karte bis zu ihrer Erneuerung.     

A modern hardware setup for real-time turbulence measurements in two-phase flows

A modern concept of cost-effective digital signal processing hardware for measuring and analysing data from experiments investigating turbulent two-phase flows is presented. Using an array processor together with an appropriate analog-to-digital converter, conventional turbulence characteristics such as turbulence spectra, correlation functions, turbulence intensities and — scales can be evaluated in real time.     

Ground state systematics and collective dipole excitations of spheroidally deformed sodium clusters in a diffuse jellium model

We solve the Kohn-Sham equations self-consistently in the local density approximation for spheroidal sodium clusters in the particle range 8 ≤ Z ≤ 40. We use a smooth fermi-like jellium density to simulate the influence of the ions in the surface region and obtain similar results as Ekardt and Penzar, but slightly different regions of prolate-to-oblate transitions. We present the systematics of potential energy curves with respect to transitions between oblate, prolate and spherical shapes. Shape transitions occur at particle numbers 12/14 (prolate/oblate), 18/20/22 (oblate/spherical/prolate) and 30/32 (prolate/oblate), which are in good agreement with experimental results. The quadrupole and hexadecupole overlap of the electron density with the jellium is investigated, showing a strong hexadecupole dependence for selected clusters. Collective dipole resonances are described in a simple sum rule approach, which reveals a double splitting according to the different resonance frequencies along the principal axes of the spheroid. The systematics of the resonance peaks for the larger clusters with Z ≥ 20 is in good agreement with experimental results.     

Determination and Health Implication of the Erucic Acid Content of Broccoli Florets, Sprouts, and Seeds

The erucic acid content of broccoli florets, sprouts, and seeds was found to be about 0.8, 320, and 12100 mg/100 g, respectively. Using the erucic acid limit established for canola oil in the U.S.A. and Canada as a guideline, the estimated dietary intake of erucic acid from florets and sprouts was considered of little consequence, whereas in seeds a relatively small amount (about 35 g/wk) equaled our calculated exposure limit for erucic acid. Additionally, the most complete fatty acid distribution yet published for the various forms of broccoli are presented.     

Modeling and analysis of substrate coupling in integrated circuits

This paper describes a fast and accurate simulator for characterizing the effects of substrate coupling on integrated-circuit performance. The technique uses the electrostatic Green function of the substrate medium and the fast Fourier transform algorithm. It is demonstrated that this technique is suitable for optimization of layout for minimization of substrate coupling. Analysis of substrate coupling in different types of substrates and the utility of guard rings in different types of substrates is also discussed. Experimental verification of the models is presented