Rapid Combinatorial Synthesis and Chromatography Based Screening of Phosphorescent Iridium Complexes for Solution Processing

This work reports the combinatorial synthesis and screening of phosphorescent iridium complexes as solution processable emitters for OLEDs. The approach taken here allows for the rapid synthesis, isolation, spectroscopic characterization and identification of the libraries based on chromatographic methods. Subsequent analysis of the irradiation induced degradation provides insight on the stability of the complexes under continuous excitation. The method is versatile and can easily be applied to other metal complexes or organic dyes for various applications, e.g., in electroluminescence, photovoltaics and sensing.     

Visualizing the performance loss of solar cells by IR thermography — an evaluation study on CIGS with artificially induced defects

Local electric defects may result in considerable performance losses in solar cells. Infrared (IR) thermography is one important tool to detect these defects on photovoltaic modules. Qualitative interpretation of IR images has been carried out successfully, but quantitative interpretation has been hampered by the lack of “calibration” defects. The aims of this study are to (i) establish methods to induce well‐defined electric defects in thin‐film solar cells serving as “calibration” defects and to (ii) assess the accuracy of IR imaging methods by using these artificially induced defects. This approach paves the way for improving quality control methods based on imaging in photovoltaic. We created ohmic defects (“shunts”) by using a focused ion beam and weak diodes (“interface shunts”) by applying a femto‐second laser at rather low power on copper indium gallium selenide cells. The defects can be induced precisely and reproducibly, and the severity of the defects on the electrical performance can be well adjusted by focused ion beam/laser parameters. The successive assessment of the IR measurement (ILIT‐Voc) revealed that this method can predict the losses in P_mpp (maximal power extractable) with a mean error of below 10%. Copyright © 2016 John Wiley & Sons, Ltd.     

Analysis of temperature coefficients for III–V multi‐junction concentrator cells

The temperature dependence of the I–V parameters of different III–V multi‐junction concentrator cells at several concentration levels was investigated. Moreover, the influence of spectral changes on the temperature coefficients of multi‐junction solar cells was examined. Complete sets of temperature coefficients of a metamorphic Ga_0.35In_0.65P/Ga_0.83In_0.17As dual‐junction cell, a metamorphic Ga_0.35In_0.65P/Ga_0.83In_0.17As/Ge triple‐junction cell and a lattice‐matched Ga_0.50In_0.50P/Ga_0.99In_0.01As/Ge triple‐junction cell determined under well‐controlled laboratory conditions are reported. Copyright © 2012 John Wiley & Sons, Ltd.     

Nanopositioning using the spiral of Archimedes: The probe-based storage case

Micro-Electro-Mechanical-Systems (MEMS)-based scanning probes appear as potential candidates for a wide variety of emerging nanoscale applications, including ultra-high-density data-storage and surface imaging. In this work, a spiral trajectory nanopositioning scheme is proposed as an alternative to the conventional raster positioning pattern. The resulting positioning signal has an extremely narrowband frequency content, which shifts very slowly over time. These properties enable enhanced tracking performance and offer potentially uninterrupted high-speed operation. The mathematical analysis of the spiral positioning signal as well as its properties are presented. Experimental results obtained from applying the new nanopositioning scheme on a MEMS-based scanning-probe data-storage setup for thermomechanical storage on polymer medium are illustrated.     

Reconstruction quality and spectral content of an electromagnetic time-domain inversion algorithm

A tomographic time-domain reconstruction algorithm for solving the inverse electromagnetic problem is described. The application we have in mind is dielectric breast cancer detection but the results are of general interest to the field of microwave tomography. Reconstructions have been made from experimental and numerically simulated data for objects of different sizes in order to investigate the relation between the spectral content of the illuminating pulse and the quality of the reconstructed image. We have found that the spectral content is crucial for a successful reconstruction. The work has further shown that when imaging objects with different scale lengths it is an advantage to use a multiple step procedure. Low frequency content in the pulse is used to image the large structures and the reconstruction process then proceed by using higher frequency data to resolve small scale lengths. Good agreement between the results obtained from experimental data and simulated data has been achieved.     

Forward and Reverse Converters and Moduli Set Selection in Signed-Digit?Residue?Number?Systems

This paper presents an investigation into using a combination of two alternative digital number representations; the residue number system (RNS) and the signed-digit (SD) number representation in digital arithmetic circuits. The combined number system is called RNS/SD for short. Since the performance of RNS/SD arithmetic circuits depends on the choice of the moduli set (a set of pairwise prime numbers), the purpose of this work is to compare RNS/SD number systems based on different sets. Five specific moduli sets of different lengths are selected. Moduli-set-specific forward and reverse RNS/SD converters are introduced for each of these sets. A generic conversion technique for moduli sets consisting of any number of elements is also presented. Finite impulse response (FIR) filters are used as reference designs in order to evaluate the performance of RNS/SD processing. The designs are evaluated with respect to delay and circuit area in a commercial 0.13 μm CMOS process. For the case of FIR filters it is shown that generic moduli sets with five or six moduli results in designs with the best area × delay products.

Adhesion and Mechanical Properties of PNIPAM Microgel Films and Their Potential Use as Switchable Cell Culture Substrates

Thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) microgel films are shown to allow controlled detachment of adsorbed cells via temperature stimuli. Cell response occurs on the timescale of several minutes, is reversible, and allows for harvesting of cells in a mild fashion. The fact that microgels are attached non‐covalently allows using them on a broad variety of (charged) surfaces and is a major advantage as compared to approaches relying on covalent attachment of active films. In the following, the microgels’ physico‐chemical parameters in the adsorbed state and their changes upon temperature variation are studied in order to gain a deeper understanding of the involved phenomena. By means of atomic force microscopy (AFM), the water content, mechanical properties, and adhesion forces of the microgel films are studied as a function of temperature. The analysis shows that these properties change drastically when crossing the critical temperature of the polymer film, which is the basis of the fast cell response upon temperature changes. Furthermore, nanoscale mechanical analysis shows that the films posses a nanoscopic gradient in mechanical properties.     

Experimental validation of the linear drive train for a total artificial heart system

In industrialized countries cardiovascular diseases are the major cause of death. Beside heart transplants, which are a limited option due to the limited number of available human donor hearts, Total Artificial Hearts (TAHs) are the only therapy available for some patients with terminal heart diseases. For various reasons a total implantable artificial heart is desirable, but also sets restrictions in terms of weight and dimensions due to the limited space in the human thorax. Therefore a precise requirement profile is needed for the drive design to provide sufficient force for the blood pump and to avoid oversizing of the drive and to prevent blood damage by overheating.     

An overview of state of the art and research in the fields of sensible, latent and thermo-chemical thermal energy storage

Due to the increase in volatile renewable power and heat generation (wind or solar), thermal energy storage (TES) has obtained growing importance and interest. The technology can be distinguished into three main types: sensible, latent and thermochemical storage. Apart from low and medium temperature heat applications, high temperature TES also is an attractive means to store power in the form of heat (before the thermodynamic transformation process). Thermochemical storage allows for long duration seasonal storage of energy.     

Reliability of gate dielectrics and metal–insulator–metal capacitors

In this review paper reliability characterisation methods of SiO₂ as gate dielectric and metal–insulator–metal capacitors with various dielectrics are discussed. It includes the test structure design, the stress and measurement sequences, the raw data analysis and the extrapolation models of measured time to breakdown to lifetimes at operating conditions and targeted product failure rates. For each topic various references are given where further details are described. Especially pitfalls of approaches and problem areas are highlighted.