Influence of superplasticizers on pore solution composition and on expansion of concrete due to alkali-silica reaction

The use of superplasticizers (SP) is widespread in today’s concrete production. Usually, SP are used when specific demands in regard to workability, strength or durability have to be met. As they contain sodium sulphate, they have the potential to increase the alkalinity in the pore solution and the risk of damages due to alkali-silica reaction. In this study, the effect of two SP on the potential reactivity of concrete is examined by analyzing pore solutions of pastes and mortars and by measuring concrete expansion. The use of a naphthalene–sulphonate-based SP (Na content referred to liquid: 2.8%) leads to an increase in hydroxide concentration in the pore solution during the first two weeks going together with an accelerated concrete expansion during this period. The effects of a polycarboxylate-based SP (Na content referred to liquid: 0.5%) are less pronounced and do not result in an increased concrete expansion.     

Canadian Field Soils I. Mineral Composition by XRD/XRF Measurements

Forty Canadian soils were laboratory tested for the presence of quartz and other minerals using X-ray diffraction/X-ray fluorescence techniques. On average, the highest quartz content was observed in soil samples from sites in Nova Scotia followed by Prince Edward Island sites, whereas soil sample from British Columbia sites had the lowest quartz content. The second most abundant mineral was albite that mainly occurred in soil samples from Ontario and Quebec sites. Illite was the third most abundant and prevailed in soils mainly from British Columbia and New Brunswick sites. Soil samples from British Columbia sites had the highest combined clay and silt content and were composed of illite, albite, kaolinite, and chlorite. The lowest clay content was found in the samples from the Quebec sites. The highest microcline (a potassium feldspar) content was observed in Quebec, Ontario, and Prince Edward Island sites. In contrast to other provinces, samples from Quebec and Ontario sites also included amphibole. Soil samples from Saskatchewan and Manitoba sites also comprised carbonates, i.e., calcite and dolomite. Iron oxides (e.g., goethite) were present in all soils, except the Quebec sites, but their occurrence was rather insignificant.     

Electrochemical characteristics of semi conductive silicon anode for lithium polymer batteries

In this paper, the electrochemical characteristics of semi conductive silicon thin films (n-type and p-type silicon) anodes integrated with the solid polymer electrolyte for lithium polymer batteries were investigated. The charge/discharge cycling tests revealed that the phosphorus-doped n-type silicon electrode shows the most stable cyclic performance after the 40^th cycle and still maintains a reversible specific capacity of about 2,500 mAh/g. The enhanced electrochemical performance of the doped silicon anode was attributed to the enhancement of its electrical conductivity, which was further confirmed by impedance spectroscopy and surface analysis by XPS.     

A 243-GHz F/sub t/ and 208-GHz F/sub max/, 90-nm SOI CMOS SoC technology with low-power mm-wave digital and RF circuit capability

A 90-nm silicon-on-insulator (SOI) CMOS system on-chip integrates high-performance FETs with 243-GHz F/sub t/, 208-GHz F/sub max/, 1.45-mS//spl mu/m gm, and sub 1.1-dB NFmin up to 26 GHz. Inductor Q of 20, VNCAP of 1.8-fF//spl mu/m/sup 2/, varactor with a tuning range as high as 25:1, and a low-loss microstrip. Transmission lines were successfully integrated without extra masks and processing steps. SOI and its low parasitic junction capacitance enables this high level of performance and will expand the use of CMOS for millimeter-wave applications.     

Fabrication of gold micro-spine structures for improvement of cell/device adhesion

Improvement of the interface contact between biological objects and electronic devices can significantly enhance the quality of electronic signal transfer. The surface of biosensor can be artificially modified in order to strengthen the adhesion of biological cells. We report on results of fabrication of micron and submicron golden spines by means of e-beam lithography and electroplating. The fabrication technique allows easy modification of the size and shape of golden spines by variation of processing parameters. The structures with different spine profiles and spacing have been fabricated for optimization of cell growth conditions. We present the results of growth of rat cortical neurons on the surface of spine modified samples. Well-defined cell guidance was established at the spine arrays. Furthermore, the results of transmission electron microscope and focused ion beam technique confirm the good adhesion between the spines and cell structures.