Impact of Inspected Buffers on Production Parameters of Construction Processes

This paper examines the production implications of quality control inspections conducted on the buffer between processes in a construction project by modeling the linkage between these processes. Inspection of partially completed work at the end of one activity but before the beginning of work by the next activity is fairly common. Work that is deemed to be of sufficient quality is then made available for the next activity. Work that is deemed insufficient requires rework, typically by the trade appropriate to the activity that fed into the buffer, to bring the work into compliance. This has implications for workload management for that trade, of course, as well as for the reliability of work flow to the successor or downstream processes. While such situations are common in all construction sectors, an example from the residential construction sector was examined via a simulation model augmented by field data collected from residential construction projects. The impacts of the work flow into the predecessor process, the inspection pass rate, and resource availability were examined. The inspection pass rate was found to dramatically affect the reliability of work flow, unless resources are unlimited. Furthermore, the inspection pass rate was found to be functionally related to the production parameters of the process.     

On the impact of TiN film thickness variations on the effective work function of poly-Si/TiN/SiO/sub 2/ and poly-Si/TiN/HfSiON gate stacks

The impact of TiN film thickness variations on the effective work function (WF) of poly-Si/TiN/SiO/sub 2/ and poly-Si/TiN/HfSiON interfaces has been investigated. The electrical signatures of these gate stacks indicate that the concentration of Hf-Ti and Ti-Si bonds at the (poly-Si/TiN)/HfSiON and (poly-Si/TiN)/SiO/sub 2/ interface plays a significant role on the control of the gate stacks' WF. The density of these interfacial bonds and the related work function changes are correlated to the degree of nucleation of the TiN film on the dielectric.     

Uphill permeation model of gold(III) and its separation from base metals using thiourea derivatives as ionophores across a liquid membrane

This work deals with carrier-facilitated membrane transport of Au(III) from chloride media across a polymer-immobilised liquid membrane (PILM) using as organic reagents N-(thiocarbamoyl)benzamide derivatives and N-benzoylthiourea derivatives, denoted as 2a–c and 3a–f, respectively. Both the composition of the organic membrane solvent and the type of carrier have a marked effect on gold permeation. Recovery and permeability of gold using 2a–c and 3a–f across a PILM proceed in the following order: 3e≈3d≈3c?3f>3b≈3a≈2a≈2b≈2c. In view of the performance of these carriers, 3c was selected as a metal receptor for detailed studies of Au(III) in permeation. A model is presented for the permeation of Au(III) (61 μM) in 0.5 M Cl⁻ at pH 2.5 using 3c as a membrane carrier. The mathematical equations describing the rate of permeation are derived to correlate the membrane permeability coefficient with diffusional and equilibrium parameters. The mass transfer coefficient was calculated from the described model as 1.1×10⁻⁵ m s⁻¹, and the thickness of the aqueous boundary was later calculated to be 65 μm. Several polymeric supports were tested for impregnation of the organic extractant, and Durapore (Millipore) afforded the maximum flux for Au(III), yielding a value of 1.1×10⁻¹⁴ mol m⁻² s. The relationship between flux and support characteristics is derived and a mathematical equation is presented. Of the several diluents used, cumene had the most satisfactory performance in terms of PILM stability and metal transport. Of the different reagents used, 0.5 M sodium thiocyanate in 0.5 M NaCl at pH 2.5 served most efficiently as the stripping agent. More than 80% of the Au(III) could be readily separated using 3c in the presence of various metals such as Cu(II), Fe(III) and Zn(II).     

Loading time history for tornado-generated missiles

Nuclear power plant structures in the USA are designed for impact by tornado-generated missiles. The design load for flexure and shear can be obtained from the deceleration of the missile on impact. The paper gives a simple method to determine the deceleration of the most critical pipe missile. Results, obtained by the simple method, are compared with full-scale test results. The comparisons between the predicted and actual deceleration time histories show excellent correlation.     

Effect of candicidin on cholesterol and bile acid metabolism in the rat

Sterol metabolism studies were carried out in rats maintained on a diet containing a polyene antibiotic, candicidin, (30 mg/kg/day) for 2-1/2 months. Compared to the controls, the candicidintreated animals had a smaller food intake and weight gain during this period. There was no difference between the 2 groups in serum cholesterol levels, biliary cholesterol or bile acid concentrations. However, in the experimental group, liver cholesterol content decreased by 27% and hepatic HMG-CoA reductase increased by 36%. Candicidin administration produced an 84% increase in neutral sterol output without change in bile acid output. Cholesterol absorption was reduced 80% by candicidin feeding. The weight of ventral prostate was reduced 33% by candicidin administration. Prostatic HMG-CoA reductase levels were 3 times higher than those of the liver, but enzyme activity was unchanged by candicidin treatment.     

Influence of various crosslinking systems on the mechanical properties of gas phase EPDM/PP thermoplastic vulcanizates

Dynamically cured thermoplastic elastomers or thermoplastic vulcanizates (TPVs) are widely used nowadays for their unique characteristics. In this paper, gas phase ethylene–propylene–diene terpolymer (GEPDM)/Polypropylene (PP) TPVs with various crosslinking systems have been extensively studied to optimize the curative level in each crosslinking system with special reference to their mechanical properties. Optimized systems were compared for heat aging, recyclability, crosslink density, morphology studies, and dynamic mechanical analysis. Crosslinking by peroxide in the presence of triallyl cyanurate as a coagent gives best overall performance with reference to excellent heat aging behavior, tension set, and compatibility between GEPDM and PP. Conventional EPDM/PP system was also compared with GEPDM/PP system. GEPDM/PP system was found to exhibit better behavior in all respects. Significant correlations were obtained between delta torque values obtained from Moving Die Rheometer and modulus or cross link density of TPVs irrespective of the nature of crosslinking agent. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5463–5471, 2006     

Studies on miscibility of blends of ethylene methyl acrylate and polydimethyl siloxane rubber

Blends of ethylene methyl acrylate (EMA) and poly(dimethylsiloxane) rubber (PDMS) are demonstrated to be miscible. The miscibility results in a single and composition-dependent glass transition temperature. IR spectra of the blends provide direct evidence of chemical reaction between EMA and PDMS rubber.     

Photoelastic Studies on Rubber-to-Rubber Joints

Photoelasticity is a method which yields information on the principal stress difference and orientation in a composite structure. Various problems associated with this technique, especially those concerning the fundamental relationship between the fringe order and the stress, have yet to be investigated. A few studies of this relationship in a universal stress state have been presented, particularly in the field of rubber-to-metal and rubber-to-fabric composites, but no evaluations have so far been made in the field of rubber-to-rubber joints. Applying the photoelastic method, we report our observations on the stress distribution in a natural rubber to natural rubber joint subjected to uniaxial tension. A comparison between the results of experimental photoelastic studies and the corresponding computer modelling has been illustrated. The theoretical displacement pattern of the angular joints of bi-rubber part has also been highlighted.     

Synthesis of γ-TiAl by Reactive Spark Plasma Sintering of Cryomilled Ti and Al Powder Blend,Part I: Influence of Processing and Microstructural Evolution

To provide insight into the influence of an electric field on the kinetics of diffusion, fully lamellar γ-TiAl was processed by a rapid, two-stage, solid-state reactive sintering via spark plasma sintering (SPS) of a cryomilled Ti, Al powder blend. Cryomilling was implemented in the current study to attain a nanostructured grain size in the Ti and Al powder blend, and thereby provide insight into the influence of grain size on the underlying diffusion kinetics. Following a two-step process involving SPS at 873 K (600 °C) for 15 minutes and 1523 K (1250 °C) for 30 minutes, a fully lamellar TiAl alloy, with submicron lamellar spacing, was successfully obtained. Microstructural refinement in the Ti and Al powders during cryomilling led to an increase in solid-state diffusion, and the underlying mechanisms are discussed in detail.     

Grafting of vinyl monomers onto natural rubber,II. Graft copolymerization of methyl methacrylate onto natural rubber using tetravalent ceric ions

The use of tetravalent ceric ions to initiate graft-copolymerization of methyl methacrylate onto natural rubber (NR) has been investigated. The rate of grafting has been determined by varying the concentration of monomer and cerium(IV), the temperature and the solvents. The graft yield increases with increasing monomer concentration up to 1.877 M, with further increase of the monomer, the graft yield decreases. The percentage of grafting increases with increasing cerium(IV) concentration up to 0.035 M, thereafter it decreases. With increasing temperature the graft yield increases. The effect of CuSO₄ on the rate of grafting has also been investigated. A plausible mechanism has been suggested and the kinetic rate expressions have been derived.