Synthesis,morphology and properties of segmented poly(ether ester amide)s comprising uniform glycine or β-alanine extended bisoxalamide hard segments

Segmented poly(ether ester amide)s comprising glycine or β-alanine extended bisoxalamide hard segments are highly phase separated thermoplastic elastomers with a broad temperature independent rubber plateau. These materials with molecular weights, M_n, exceeding 30 × 10³ g mol^?1 are conveniently prepared by polycondensation of preformed bisester–bisoxalamides and commercially available PTHF diols. FT-IR revealed strongly hydrogen bonded and highly ordered bisoxalamide hard segments with degrees of ordering between 73 and 99%. The morphology consists of fiber-like nano-crystals randomly dispersed in the soft polymer matrix. The micro-structural parameters of the copolymers were addressed by simultaneous small- and wide-angle X-ray scattering. It is shown that the crystals have strictly identical thickness, which is close to the contour length of the hard segment. The long dimension of the crystals is identified with the direction of the hydrogen bonds. The melting transitions of the hard segments are sharp, with temperatures up to 170 °C. The studied polymers have an elastic modulus in the range of 139–170 MPa, a stress at break in the range of 19–31 MPa combined with strains at break of higher than 800%. The segmented copolymer comprising the β-alanine based bisoxalamide hard segment with a spacer of 6 methylene groups has a melting transition of 141 °C which is higher than the melting transition of its glycine analogue of 119 °C. Likewise, the fracture stress increased from 22 to 31 MPa when the glycine ester group in the hard segment was replaced with β-alanine. The improved thermal and mechanical properties of the latter polymers is related to the crystal packing of the β-alanine based hard segments in the copolymer compared to the packing of the hard segments comprising glycine ester groups.     

Adaptive Immune Responses in a Multiple Sclerosis Patient with Acute Varicella-Zoster Virus Reactivation during Treatment with Fingolimod

Fingolimod, an oral sphingosine 1-phosphate (S1P) receptor modulator, is approved for the treatment of relapsing forms of multiple sclerosis (MS). The interference with S1P signaling leads to retention particularly of chemokine receptor-7 (CCR7) expressing T cells in lymph nodes. The immunological basis of varicella zoster virus (VZV) infections during fingolimod treatment is unclear. Here, we studied the dynamics of systemic and intrathecal immune responses associated with symptomatic VZV reactivation including cessation of fingolimod and initiation of antiviral therapy. Key features in peripheral blood were an about two-fold increase of VZV-specific IgG at diagnosis of VZV reactivation as compared to the previous months, a relative enrichment of effector CD4+ T cells (36% versus mean 12% in controls), and an accelerated reconstitution of absolute lymphocytes counts including a normalized CD4+/CD8+ ratio and reappearance of CCR7+ T cells. In cerebrospinal fluid (CSF) the lymphocytic pleocytosis and CD4+/CD8+ ratios at diagnosis of reactivation and after nine days of fingolimod discontinuation remained unchanged. During this time CCR7+ T cells were not observed in CSF. Further research into fingolimod-associated VZV reactivation and immune reconstitution is mandatory to prevent morbidity and mortality associated with this potentially life-threatening condition.     

MS Binding Assays for D1 and D5 Dopamine Receptors

MS Binding Assays are a label‐free alternative to radioligand binding assays. They provide basically the same capabilities as the latter, but an unlabeled reporter ligand is used instead of a radioligand. The study presented herein describes the development of MS Binding Assays that address D₁ and D₅ dopamine receptors. A highly sensitive, rapid and robust LC–ESI‐MS/MS quantification method for the selective D₁ dopamine receptor antagonist SCH23390 ((5R)‐8‐chloro‐3‐methyl‐5‐phenyl‐1,2,4,5‐tetrahydro‐3‐benzazepin‐7‐ol) was established and validated, using its 8‐bromo analogue SKF83566 as an internal standard. This quantification method proved to be suitable for the characterization of SCH23390 binding to human D₁ and D₅ receptors. Following the concept of MS Binding Assays, saturation experiments for D₁ and D₅ receptors were performed, as well as competition experiments for D₁ receptors. The results obtained are in good agreement with results from radioligand binding assays and therefore indicate that the established MS Binding Assays addressing D₁ and D₅ receptors are well‐suited substitutes for radioligand binding assays, the technique that has so far dominated affinity determinations toward these targets.     

Tetraacylgermanes as highly efficient photoinitiators for visible light cured dimethacrylate resins and dental composites

Tetrabenzoylgermane 1 and various substituted tetrabenzoylgermanes 2 – 7 were investigated as visible light (VL) photoinitiators (PIs) for dental dimethacrylate resins and dimethacrylate‐based composites. The tetrabenzoylgermanes 1 – 7 show a very strong VL absorption between 400 and 450 nm. Substituents on the benzoyl chromophore strongly influence their properties such as melting point, solubility, absorption behavior, or PI reactivity. A good photobleaching behavior and a very high reactivity as VL PI was found in photo‐differential scanning calorimeter experiments for selected tetrabenzoylgermanes. Composite pastes containing only ～0.1 wt % of Ge‐PI exhibited a sufficient photocuring due to the high PI‐reactivity of the tetraacylgermanes. Among the investigated germane PIs, tetrakis(2‐methylbenzoyl)germane 2 shows the best performance as VL PI for restorative composites and enables the composites to be photocured using an LED with an emission maximum of 500 nm. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46115.     

Development of novel 1,2,3,4-tetrahydroisoquinoline derivatives and closely related compounds as potent and selective dopamine D3 receptor ligands

Based on N-alkylated 1,2,3,4-tetrahydroisoquinoline derivatives, which are structurally related to the partial agonist BP 897, a series of novel, selective dopamine D3 receptor antagonists has been synthesised. Derivatisation included changes in the arylamide moiety and the tetrahydroisoquinoline substructure leading to compounds with markedly improved selectivities and affinities in the low nanomolar concentration range. From the 55 structures presented here, (E)-3-(4-iodophenyl)-N-(4-(1,2,3,4-tetrahydroisoquinolin-2-yl)butyl)acrylamide (51) has high affinity (Ki(hD3)=12 nM) and a 123-fold preference for the D3 receptor relative to the D2 receptor subtype. Its pharmacological profile offers the prospect of a novel radioligand as a tool for various dopamine D3-receptor-related in vitro and in vivo investigations.     

Dielectric relaxation of polar aromatics in unoriented and oriented linear low‐density polyethylene

The dielectric behavior of some polar aromatics dissolved in nonpolar unoriented and stretched linear low‐density polyethylene was investigated within the temperature region between 150 and 350 K. The measurements were carried out in the frequency range 1 kHz to 10 MHz. The maximum temperatures and the half widths of the loss tangent peaks depend upon the shape and the polar structure of guest molecules. Stretching the samples induced a shift of the loss tangent to higher temperatures, decreased the height, and increased the width of tan δ peak. The activation energy is also influenced by the type of guest molecules and orientation of polymer matrix. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1278–1282, 2001     

Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions

Repair of composite structures and the impact of demanding environmental conditions is a crucial issue for the aircraft industry because of the increasing use of composites in modern aircraft. Consequently, the impact of environmental conditions common for aircraft applications on repair specimens in comparison to nonrepaired specimens is studied. All specimens are produced from a woven carbon fiber-reinforced epoxy-based prepreg. For the repair-specimens, an epoxy-based film adhesive is used for the soft patch repair approach. During the repair process, the surface of the precured prepreg is prepared by a mechanical method (sanding) and an additional chemical functionalization, respectively. Moisture absorption of the repair specimens is independent of the surface preparation method and higher for the repaired than for the nonrepaired specimens. The key influencing environmental conditions for the tensile strength and the failure mode of the repair specimens are elevated temperature testing as well as hot/wet conditioning and conditioning in deionized water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47506.     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

Fouling Detection in an Optically Accessible Microstructured Heat Exchanger

The application of highly effective microstructured devices in continuous production and industrial environments is frequently prone to fouling. A new method is presented to characterize fouling in these microstructures. Thermal fouling of aqueous solutions containing whey protein were used as a test system. Different fouling effects could be observed and distinguished. Integral fouling indicators, such as thermal fouling resistance and pressure drop, as conventional criteria for the occurrence of fouling were compared with direct local optical observation. Low thermal fouling resistances could be detected.     

Method and Process Development of Advanced Atmospheric Plasma Spraying for Thermal Barrier Coatings

Over the last few years, global economic growth has triggered a dramatic increase in the demand for resources, resulting in steady rise in prices for energy and raw materials. In the gas turbine manufacturing sector, process optimizations of cost-intensive production steps involve a heightened potential of savings and form the basis for securing future competitive advantages in the market. In this context, the atmospheric plasma spraying (APS) process for thermal barrier coatings (TBC) has been optimized. A constraint for the optimization of the APS coating process is the use of the existing coating equipment. Furthermore, the current coating quality and characteristics must not change so as to avoid new qualification and testing. Using experience in APS and empirically gained data, the process optimization plan included the variation of e.g. the plasma gas composition and flow-rate, the electrical power, the arrangement and angle of the powder injectors in relation to the plasma jet, the grain size distribution of the spray powder and the plasma torch movement procedures such as spray distance, offset and iteration. In particular, plasma properties (enthalpy, velocity and temperature), powder injection conditions (injection point, injection speed, grain size and distribution) and the coating lamination (coating pattern and spraying distance) are examined. The optimized process and resulting coating were compared to the current situation using several diagnostic methods. The improved process significantly reduces costs and achieves the requirement of comparable coating quality. Furthermore, a contribution was made towards better comprehension of the APS of ceramics and the definition of a better method for future process developments.