Organic pollutant removal versus toxicity reduction in industrial wastewater treatment: the example of wastewater from fluorescent whitening agent production

Industrial wastewater treatment in the chemical industry aims at eliminating organic contaminants, as these pollutants may be persistent and ecotoxic. In a case study performed in collaboration with the chemical industry, we investigated the removal of a fluorescent whitening agent and its side products in the wastewater-treatment system. Adsorption to activated carbon and biological treatment were simulated in laboratory tests. Algae toxicity tests were performed to quantify the toxicity of the wastewater mixture and of single components. The contaminants identified accounted for up to 82% of the wastewater's total organic carbon (TOC). Adsorption to activated carbon eliminated the TOC and the single contaminants only slightly. Nevertheless, the toxicity of the wastewater decreased by 40%. In contrast, biological treatment reduced the TOC by up to 80%, and the whole effluent toxicity increased. These results indicate that new ecotoxic metabolites were formed during the biological treatment. They also illustrate that mere reduction of the TOC in the wastewater-treatment system is not sufficient for ensuring a reduction of environmental impact. Therefore, simultaneously conducting TOC measurements and toxicity tests, as demonstrated in the current work, is recommended.     

Iron-mediated oxidation of antimony(III) by oxygen and hydrogen peroxide compared to arsenic(III) oxidation

Antimony is used in large quantities in a variety of products, though it has been declared as a pollutant of priority interest by the Environmental Protection Agency of the United States (USEPA). Oxidation processes critically affect the mobility of antimony in the environment since Sb(V) has a greater solubility than Sb(lll). In this study, the cooxidation reactions of Sb(lIl) with Fe(ll) and both O2 and H2O2 were investigated and compared to those of As(III). With increasing pH, the oxidation rate coefficients of Sb(lll) in the presence of Fe(ll) and O2 increased and followed a similar pH trend as the Fe(ll) oxidation by O2. Half-lives of Sb(lll) were 35 and 1.4 h at pH 5.0 and pH 6.2, respectively. The co-oxidation with Fe(ll) and H2O2 is about 7000 and 20 times faster than with Fe(ll) and O2 at pH 3 and pH 7, respectively. For both systems, *OH radicals appear to be the predominant oxidant below approximately pH 4, while at more neutral pH values, other unknown intermediates become important. The oxidation of As(lll) follows a similar pH trend as the Sb(lll) oxidation; however, As(lll) oxidation was roughly 10 times slower and only partly oxidized in most of the experiments. This study shows that the Fe(ll)-mediated oxidation of Sb(Ill) can be an important oxidation pathway at neutral pH values.     

Designing training for process control simulators: a review of empirical findings and current practices

Although simulators have been widely used as training environments in different industries (e.g. oil and nuclear power), there is little rigorous empirical work evaluating the effectiveness of the training methods employed. This article examines the use of simulator training in process control environments. The results of an exploratory field study are reported and the current practices of simulator training are described. The study revealed that simulator training varied considerably across organisations, often with little theoretical or empirical work to guide training design. To evaluate the utility and effectiveness of different methods of simulator training in process control environments, the article also presents a literature review of the research on laboratory- and field-based training. Several training methods are identified as having particular potential for temporal and adaptive transfer and are to be empirically tested in future studies.     

Influence of Strain Rate,Temperature, Plastic Strain,and Microstructure on the Strain Rate Sensitivity of Automotive Sheet Steels

This work identifies the influence of strain rate, temperature, plastic strain, and microstructure on the strain rate sensitivity of automotive sheet steel grades in crash conditions. The strain rate sensitivity m has been determined by means of dynamic tensile tests in the strain rate range 10^?3–200 s^?1 and in the temperature range 233–373 K. The dynamic flow curves have been tested by means of servohydraulic tensile testing. The strain rate sensitivity decreases with increasing plastic strain due to a gradual exhausting of work hardening potential combined with adiabatic softening effects. The strain rate sensitivity is improved with decreasing temperature and increasing strain rate, according to the thermally activated deformation mechanism. The m‐value is reduced with increasing strength level, this decrease being most pronounced for steels with a yield strength below 400 MPa. Solid solution alloying with manganese, silicon, and especially phosphorous elements lowers the strain rate sensitivity significantly. Second phase hardening with bainite and martensite as the second constituent in a ferritic matrix reduces the strain rate sensitivity of automotive sheet steels. A statistical modeling is proposed to correlate the m‐value with the corresponding quasistatic tensile flow stress.     

Generation of carrier peptides for the delivery of nucleic acid drugs in primary cells

Now that the human genome has been decoded, the demand for novel therapeutic concepts, such as gene and stem cell therapy, is higher than ever before. Although new and better pharmaceutical agents are available, their efficient delivery to the intracellular site of action is still a serious challenge. A possible solution to this problem is the use of cell-penetrating peptides as delivery vectors, including derivatives of human calcitonin (hCT). The aim of this study was to synthesise novel branched hCT-derived peptides for the noncovalent delivery of nucleic acids. The uptake of the resulting oligocationic peptides into various cell lines as well as primary cells was monitored by fluorescence microscopy. To determine the appropriate peptide-plasmid charge ratios for efficient cell transfection, electromobility shift assays were carried out. Finally, flow cytometric and fluorescence microscopic studies of gene expression highlighted two novel hCT-derived peptides as highly effective in the delivery of noncovalently complexed plasmid DNA. Thus, the absence of cytotoxicity paired with highly efficient cell internalisation and transfection rates, in primary cells as well, make both peptides powerful candidates as drug delivery vectors, especially for plasmid DNA, for both in vivo and ex vivo therapeutic applications.     

Resuspension and settling of helminth eggs in water: Interactions with cohesive sediments

Helminth parasite eggs in low quality water represent main food safety and health hazards and are therefore important indicators used to determine whether such water can be used for irrigation. Through sedimentation helminth eggs accumulate in the sediment, however resuspension of deposited helminth eggs will lead to increased concentration of suspended eggs in the water. Our study aimed to determine the erodibility (erosion rate and erosion threshold) and settling velocity of Ascaris and Trichuris eggs as well as cohesive sediment at different time points after incorporation into the sediment. Cohesive sediment collected from a freshwater stream was used to prepare a sediment bed onto which helminth eggs were allowed to settle. The erodibility of both sediment and helminth eggs was found to decrease over time indicating that the eggs were incorporated into the surface material of the bed and that this material was stabilized through time. This interaction between eggs and bulk sediment was further manifested in an increased settling velocity of suspended eggs when sediment was present in the suspension as compared to a situation with settling in clean water. The incorporation into the sediment bed and the aggregation with sediment particles decrease the mobility of both helminth egg types. Our findings document that helminth eggs should not be viewed as single entities in water systems when modelling the distribution of eggs since both erodibility and settling velocity of eggs are determined by mobility of the sediment present in the water stream. Recalculation of the erosion threshold for helminth eggs and sediment showed that even at relatively low current velocities i.e. 0.07-0.12 m s⁻¹ newly deposited eggs will be mobile in open irrigation channels. These environmental factors affecting resuspension must be taken into account when developing models for sedimentation of helminth eggs in different water systems.     

Uptake of fluoride from aqueous solution on nano-sized hydroxyapatite: examination of a fluoridated surface layer

Hydroxyapatite (Ca(10)(PO(4))(6)(OH)(2), HAP), both as a synthetic material and as a constituent of bone char, can serve as an effective and relatively inexpensive filter material for fluoride (F(-)) removal from drinking water in low-income countries. Fluoride uptake on HAP can occur through different mechanisms, which are, in principle, influenced by solution composition. Suspensions of HAP (2 g L(-1)) were equilibrated under controlled pH conditions (pH 6.5, 7.3, 9.5) at 25 °C for 28 d after the addition of different F(-) concentrations (0.5-7.0 mM). The reacted HAP solids were examined with Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), and Nano Secondary Ion Mass Spectroscopy (NanoSIMS). Fluoride uptake on HAP was dependent on pH, with the highest capacity at pH 6.5; the lowest uptake was found at pH 9.5. Under all experimental conditions, the thermodynamically stable mineral phase was fluorapatite, (Ca(10)(PO(4))(6)F(2), FAP). Fluoride uptake capacity was quantified on the basis of FTIR and XPS analysis, which was consistent with F(-) uptake from solution. The results of XPS and NanoSIMS analyses indicate that a fluoridated surface layer with a thickness of several nanometers is formed on nanosized HAP.