Effects of the spray drying conditions of chokeberry (Aronia melanocarpa L.) juice concentrate on the physicochemical properties of powders

A semi‐industrial spray drying process of chokeberry juice concentrate using maltodextrin was analysed. The influence of the content and dextrose equivalent (DE) of maltodextrin, inlet air temperature and rotary disc atomiser speed was studied on the physicochemical properties of the obtained powders. The size and structure of the powder particles, bulk density, moisture content, flowability, yield and total polyphenol content were analysed. An increase in carrier content from 50% to 70% caused a 4.9% increase in total polyphenol retention, better flowability (Hausner ratio decrease of 0.17) and greater yield of the powder (60%). An increase in the drying temperature (150–170 °C) caused larger particle size and improved powder flowability but also resulted in greater loss of total polyphenols. A decrease in rotary atomiser speed (11 000–15 000 rpm) had a moderate influence on particle size and improvement in flowability but had no effect on polyphenol retention. Changes in the DE (8–22) of maltodextrin as a carrier indicated a moderate growing dependence on particle size and worse flowability.     

SDR receiver computational model for application in power control

Software-defined radio (SDR) permits dynamic switches of the employed radio access technology (RAT), over-the-air (OTA) software updates, software and hardware reuse. This extended flexibility comes at the price of a higher computing complexity and, in particular, the energy consumption at the receiver. The analysis of the computational profile of signal processing algorithms is of great importance in SDR for understanding the implication on the energy consumption. Several signal processing algorithms show a different profile as a function of the signal quality perceived at the receiver antenna. Therefore, power control policies have an implication on the computational performance of SDR receivers. Understanding the behaviour of these algorithms allows trading transmitted power against receiver energy consumption. This paper presents a model for characterizing the computational profile of Turbo and LDPC decoders and demonstrates is applicability in existing power control strategies.     

Design and implementation of an ultrasonic sensor for rapid monitoring of industrial malolactic fermentation of wines

Ultrasound is an emerging technology that can be applied to monitor food processes. However, ultrasonic techniques are usually limited to research activities within a laboratory environment and they are not extensively used in industrial processes. The aim of this paper is to describe a novel ultrasonic sensor designed to monitor physical–chemical changes that occur in wines stored in industrial tanks. Essentially, the sensor consists of an ultrasonic transducer in contact with a buffer rod, mounted inside a stainless steel tube section. This structure allows the ultrasonic sensor to be directly installed in stainless steel tanks of an industrial plant. The operating principle of this design is based on the measurement of ultrasonic velocity of propagation. To test its proper operation, the sensor has been used to measure changes of concentration in aqueous samples and to monitor the progress of a malolactic fermentation of red wines in various commercial wineries. Results show the feasibility of using this sensor for monitoring malolactic fermentations in red wines placed in industrial tanks.     

The uniplanar technology: A convenient way to design multifunction subsystems and application to a biphase (0°–180°) modulator/mixer

This article outlines the high flexibility of the uniplanar technology to design complex multifunction subsystems. Furthermore, a design procedure, based on a subsystem repartition into elementary blocks and very simple electrical modeling, is proposed and applied to a uniplanar biphase (0°–180°) modulator/mixer. To start, this approach has been validated by experimentation on a subsystem up to 20 GHz. Next, preliminary results demonstrate the validity of this subsystem design procedure at millimeter-wave frequencies. © 1996 John Wiley & Sons, Inc.     

Interleukin-1β Modulation of the Mechanobiology of Primary Human Pulmonary Fibroblasts: Potential Implications in Lung Repair

Pro-inflammatory cytokines like interleukin-1β (IL-1β) are upregulated during early responses to tissue damage and are expected to transiently compromise the mechanical microenvironment. Fibroblasts are key regulators of tissue mechanics in the lungs and other organs. However, the effects of IL-1β on fibroblast mechanics and functions remain unclear. Here we treated human pulmonary fibroblasts from control donors with IL-1β and used Atomic Force Microscopy to unveil that IL-1β significantly reduces the stiffness of fibroblasts concomitantly with a downregulation of filamentous actin (F-actin) and alpha-smooth muscle (α-SMA). Likewise, COL1A1 mRNA was reduced, whereas that of collagenases MMP1 and MMP2 were upregulated, favoring a reduction of type-I collagen. These mechanobiology changes were functionally associated with reduced proliferation and enhanced migration upon IL-1β stimulation, which could facilitate lung repair by drawing fibroblasts to sites of tissue damage. Our observations reveal that IL-1β may reduce local tissue rigidity by acting both intracellularly and extracellularly through the downregulation of fibroblast contractility and type I collagen deposition, respectively. These IL-1β-dependent mechanical effects may enhance lung repair further by locally increasing pulmonary tissue compliance to preserve normal lung distension and function. Moreover, our results support that IL-1β provides innate anti-fibrotic protection that may be relevant during the early stages of lung repair.     

Preparation of conjugated linoleic acid from safflower oil

Synthetically prepared mixtures of conjugated linoleic acid (CLA) are widely used in animal and cell culture studies to investigate the potential effects of the Δ9c, 11t-18:2 isomer found in food products from ruminant animals. Alkali isomerization of linoleic acid is a common method used in the synthesis of a mixture of CLA isomers containing predominantly the Δ9c, 11t-18:2 and Δ10t, 12c-18:2 isomers. Some biological activity might also be mediated by the Δ10t, 12c-18:2 isomer. Currently few published methodologies exist describing procedures for the enrichment of these two isomers. A method is described herein to take advantage of an inexpensive oil, safflower oil, for use in synthesis of CLA and a procedure to enrich the Δ10t, 12c-18:2 isomer.     

The kinetics of phenol decomposition under UV irradiation with and without H2O2 on TiO2, Fe–TiO2 and Fe–C–TiO2 photocatalysts

H₂O₂ used in the photo-Fenton reaction with iron catalyst can accelerate the oxidation of Fe²⁺ to Fe³⁺ under UV irradiation and in the dark (in the so called dark Fenton process). It was proved that conversion of phenol under UV irradiation in the presence of H₂O₂ predominantly produces highly hydrophilic products and catechol, which can accelerate the rate of phenol decomposition. However, while H₂O₂ under UV irradiation could decompose phenol to highly hydrophilic products and dihydroxybenzenes in a very short time, complete mineralization proceeded rather slowly. When H₂O₂ is used for phenol decomposition in the presence of TiO₂ and Fe–TiO₂, decrease of OH radicals formed on the surface of TiO₂ and Fe–TiO₂ has been observed and photodecomposition of phenol is slowed down. In case of phenol decomposition under UV irradiation on Fe–C–TiO₂ photocatalyst in the presence of H₂O₂, marked acceleration of the decomposition rate is observed due to the photo-Fenton reactions: Fe²⁺ is likely oxidized to Fe³⁺, which is then efficiently recycled to Fe²⁺ by the intermediate products formed during phenol decomposition, such as hydroquinone (HQ) and catechol.     

Facile synthesis of rice shaped CuO nanostructures for battery application

The oxides of transition metals are an important class of semiconductors, which have applications in electronics, magnetic storage media, solar applications and catalysis. Among them, CuO has attracted much attention due to its widespread applications. In this paper, a facile synthesis of rice shaped CuO nanostructures have been prepared by reflux method for battery application using Copper nitrate and ammonia as precursors. Samples were prepared at three different reaction timings namely 6, 12 and 24 h. The as-prepared samples were calcinated at 400 °C to ensure the formation of copper oxide. The final products were subjected to X-ray diffraction, scanning electron microscopy, FT-IR and UV–Vis spectroscopy in order to study the effect of reaction time on the properties of the prepared copper oxide nanostructures. It is found that at controlled reaction time rice shaped CuO nanostructures are obtained. Cyclic voltammogram was recorded to understand the electrocatalytic behaviors of the rice shaped CuO sample prepared under optimized condition.     

Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study

Bipolar plate represents a key component of Proton Exchange Membrane Fuel Cell (PEFC) with several essential functions, among them the electric connection of elementary cells. Usually made of graphite, this component is studied worldwide in order to develop a commercially viable alternative: different ways have been being investigated, and to date, despite corrosion issues, stainless steel (SS) appears as a good candidate material, but its Electrical Contact Resistance (ECR) can reach unacceptable values when exposed to PEFC environment. This paper offers a comprehensive study of the parameters acting on ECR when using uncoated SS in PEFC: roughness, which influences the surface contact area with carbon baking, bulk composition of the alloy, which influences only partly the nature of passive films, and the composition and structure of passive films, strongly modified by surface treatments and ageing conditions.