Modeling and performance analysis of VI‐CRA: A congestion control algorithm for vehicular networks

This study proposes a Vehicle ID‐based CAM Rate Adaptation (VI‐CRA) algorithm for beacon messages in the vehicular network. Foremost, an improved vehicle ID–based analytical model is proposed at the MAC layer of vehicular network. The model weighs the random back‐off number chosen by vehicles participating in the back‐off process, with the vehicle ID incorporated in their respective CAMs. This eventually leads to the selection of a vehicle ID–based random back‐off number, minimizing the probability of collision due to same back‐off number selection. It is worth noting that the improved analytical model outperforms the existing works in terms of average packet delay since only one fourth of the contention window size is used throughout the simulation. To enhance the performance of the analytical model, the paper incorporates a congestion control algorithm, by adapting the rate of CAM broadcast over the control channel. The algorithm is designed considering a wide range of scenarios, ranging from nonsaturated to extremely saturated network (in terms of collision probability) and sparsely distributed to teemed network (in terms of vehicular density). For better analyses of simulation results, the algorithm is applied over different vehicle ID–based back‐off numbers. Simulation results for all the back‐off numbers show that vehicle ID–based CAM rate adaptation algorithm performs better than the traditional fixed CAM rate IEEE 802.11p, even at high vehicular density.     

Performance evaluation and implementation of convolution coded OFDM modem in wireless underwater acoustic communication

High‐data transmission rate and reliable communication in underwater acoustic channel is challenging because of limited bandwidth, multipath propagation, and Doppler shift, which results in poor bit error performance. Under this constraint, this paper explains the simulation results of underwater wireless acoustic data transmission system by using quadrature phase shift keying modulation with convolution encoder at the transmitter and proposed Viterbi decoder at the receiver. The decoder algorithm in comparison with MATLAB inbuilt function shows asserting improved results. This paper evaluates the performance of convolution coded orthogonal frequency division multiplexing modem, which is studied over typical underwater channel through an extensive computer simulation and a semirealistic experimentation. The performance of convolution coded orthogonal frequency division multiplexing system is measured in time domain plots, bit error rate curves, and number of bit errors per frame over additive white Gaussian noise and Rayleigh channel conditions.     

A policy framework for integrated and differentiated services inthe Internet

We examine the issues that arise in the definition, deployment, and management of policies related to QoS in an IP network. The article provides an overview of requirements for QoS policies, alternative policy architectures that can be deployed in a network, different protocols that can be used to exchange policy information, and exchange of policy information among different administrative domains. We discuss current issues being examined in IETF and other standards bodies, as well as issues explored in ongoing policy-related research at different universities and research laboratories     

Atomistic Origin of the Enhanced Crystallization Speed and n‐Type Conductivity in Bi‐doped Ge‐Sb‐Te Phase‐Change Materials

Phase‐change alloys are the functional materials at the heart of an emerging digital‐storage technology. The GeTe‐Sb₂Te₃ pseudo‐binary systems, in particular the composition Ge₂Sb₂Te₅ (GST), are one of a handful of materials which meet the unique requirements of a stable amorphous phase, rapid amorphous‐to‐crystalline phase transition, and significant contrasts in optical and electrical properties between material states. The properties of GST can be optimized by doping with p‐block elements, of which Bi has interesting effects on the crystallization kinetics and electrical properties. A comprehensive simulational study of Bi‐doped GST is carried out, looking at trends in behavior and properties as a function of dopant concentration. The results reveal how Bi integrates into the host matrix, and provide insight into its enhancement of the crystallization speed. A straightforward explanation is proposed for the reversal of the charge‐carrier sign beyond a critical doping threshold. The effect of Bi on the optical properties of GST is also investigated. The microscopic insight from this study may assist in the future selection of dopants to optimize the phase‐change properties of GST, and also of other PCMs, and the general methods employed in this work should be applicable to the study of related materials, for example, doped chalcogenide glasses.     

Overlay techniques for scratchpad memories in low power embedded processors

Energy consumption is one of the important parameters to be optimized during the design of portable embedded systems. Thus, most of the contemporary portable devices feature low-power processors coupled with on-chip memories (e.g., caches, scratchpads). Scratchpads are better than traditional caches in terms of power, performance, area, and predictability. However, unlike caches they depend upon software allocation techniques for their utilization. In this paper, we present scratchpad overlay techniques which analyze the application and insert instructions to dynamically copy both variables and code segments onto the scratchpad at runtime. We demonstrate that the problem of overlaying scratchpad is an extension of the Global Register Allocation problem. We present optimal and near-optimal approaches for solving the scratchpad overlay problem. The near-optimal scratchpad overlay approach achieves close to the optimal results and is significantly faster than the optimal approach. Our approaches improve upon the previously known static allocation technique for assigning both variables and code segments onto the scratchpad. The evaluation of the approaches for ARM7 processor reports, average energy, and execution time reductions of 26% and 14% over the static approach, respectively. Additional experiments comparing the overlayed scratchpads against unified caches of the same size, report average energy, and execution time savings of 20% and 10%, respectively. We also report data memory energy reductions of 45%-57% due to the insertion of a 1024-bytes scratchpad memory in the memory hierarchy of a digital signal processor (DSP).     

Electrical characteristics of low temperature-Al0.3Ga0.7As

In this work, we present electrical characterizations of n⁺ GaAs/low temperature (LT)-Al_0.3Ga_0.7As/n⁺ GaAs resistor structures in which the LT layers are grown at nominal substrate temperatures of 250 and 300°C. The resistivity and V_tfl parameters of these LT-Al_0.3Ga_0.7As layers are compared with those of LT-GaAs and Al_0.3Ga_0.7As grown at a normal growth temperature of 720°C. Low-temperature Al_0.3Ga_0.7As layers exhibit resistivities as high as 10¹² ohm-cm, nearly four orders of magnitude higher than that of LT-GaAs, and V_tfl values as high as 45 V, over twice that of LT-GaAs. We also find that the LT-Al_0.3Ga_0.7As materials grown at 250 and 300°C appear to show opposite and contradictory trends with respect to resistivity and V_tfl. We propose that this result can be explained by residual hopping conduction in the 250°C material. Temperature dependent conductivity measurements confirm the presence of a hopping mechanism in LT-Al_0.3Ga_0.7As grown at 250°C and yield activation energies of 0.77 and 0.95 eV for LT-GaAs and LT-Al_0.3Ga_0.7As, respectively.     

Sensitivity Optimization of MEMS Based Piezoresistive Pressure Sensor for Harsh Environment

Silicon - Silicon carbide piezoresistive pressure sensor is more suitable for harsh environment due to its wide bandgap, corrosion tolerance, excellent chemical inertness, high Young’s...     

Microbiological quality of sausages containing chickpea flour (Cicer arietinum)

English-type fresh skinless pork sausages in which 30% of the protein was replaced by unheated chickpea flour or by chickpea flour heated at 80°C for 1 h were evaluated microbiologically. During storage at 0°C, but not 22°C, incorporation of unheated chickpea flour lowered the microbiological quality of the sausages, but incorporation of chickpea flour previously heated at 80°C for 1 h led to no less of microbiological quality.     

Heat transfer from an immersed vertical tube to a gas fluidized bed

Fluidization and heat transfer experiments have been conducted in gas fluidized beds of two different sizes, viz., 305 × 305 mm² and 305 × 152.5 mm² and with particles of silica sands ($\text{d}\text{?}{}_{\mathrm{p}}\text{= 167, 488, 504, and 745 μ}\text{m}$), glass beads (d_p = 427 μm) and millet seeds (d_p = 2064 μm) with immersed smooth vertical heated tubes of diameter 12.7, 28.6, and 50.8 mm. Important conclusions are drawn concerning the dependence of heat transfer coefficient on fluidization velocity, bed particle diameter, tube diameter and nature of bed fluidization. The heat transfer data are employed to assess the available literature correlations for heat transfer coefficient and for its maximum value.     

Performance evaluation of breast lesion detection systems with expert delineations: a comparative investigation on mammographic images

Multimedia Tools and Applications - Performance of computerized diagnostic systems yearning to be approved by medical regulatory bodies must meet the expectations of human experts. Highly accurate...