Experimental and Simulation Analysis of Silkworm Cocoon Waste Fiber Reinforced Concrete Using FNN with EMBA Optimization

Silicon - Due to the expansion and modernization of the human population, the construction area has gradually developed. As innovations develop, a large portion of the fiber waste is thermosetting...     

Comparative evaluation of extraction of tetra- and hexa-valent neptunium ions by CMPO in a room temperature ionic liquid

ABSTRACT

Solvent extraction studies were performed to understand the extraction behavior of Np⁴⁺ and NpO₂ ²⁺ from acidic feeds with CMPO (octyl (phenyl)-N,N-diisobutyl carbamoyl methyl phosphine oxide) dissolved in 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide, a water immiscible ionic liquid. Slope analyses on the distribution data revealed the extraction of ML₂ type species, where M = Np⁴⁺ or NpO₂ ²⁺, and L = CMPO. Studies were also carried out with Pu⁴⁺ and UO₂ ²⁺ under identical conditions. The nature of the extracted species was found to vary with the nature of the ionic species.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Sensitivity Optimization of MEMS Based Piezoresistive Pressure Sensor for Harsh Environment

Silicon - Silicon carbide piezoresistive pressure sensor is more suitable for harsh environment due to its wide bandgap, corrosion tolerance, excellent chemical inertness, high Young’s...     

Design and precision construction of novel magnetic-levitation-based multi-axis nanoscale positioning systems

This paper presents two novel six-axis magnetic-levitation (maglev) stages capable of nanoscale positioning. These stages have very simple and compact structures, which is advantageous to meet the demanding positioning requirements of next-generation nanomanipulation and nanomanufacturing. Six-axis motion generation is accomplished by the minimum number of actuators and sensors. The first-generation maglev stage, namely the Δ-stage, is capable of generating translation of 300 μm and demonstrates position resolution better than 2 nm root-mean-square (rms). The second-generation maglev stage, namely the Y-stage, is capable of positioning at a resolution better than 3 nm rms over a planar travel range of 5 mm × 5 mm. A novel actuation scheme was developed for the compact structure of this stage that enables six-axis force generation with just three permanent-magnet pieces. This paper focuses on the design and precision construction of the actuator units, the moving platens, and the stationary base plates. The performance of the two precision positioners is compared in terms of their positioning and load-carrying capabilities and ease of manufacture. Control system design for the two positioners is discussed and an experimental plant transfer function model is presented for the Y-stage. The superiority of the developed instruments is also demonstrated over other prevailing precision positioning systems in terms of the travel range, resolution, and dynamic range. The potential applications of the maglev positioners include semiconductor manufacturing, microfabrication and assembly, nanoscale profiling, and nanoindentation.     

Carbon dioxide emission and its regulation at land–water interface downstream of a point source at Ganga River (India)

The streams and rivers are considered hotspots of CO₂ exchange; and representative direct CO₂ emission measurements are essential for a correct regional estimate. We measured CO₂ emission flux at 15 sites at land–water interface downstream of a point source during low flow for three consecutive months for the year 2017. The general range of CO₂ efflux observed here was close to the results of regional studies, although values near the point source were disproportionately high (>350 mg/m²/h). CO₂ emission flux showed strong dependence on total organic carbon (TOC; R² = 0.96; P < 0.001), (R² = 0.88; P < 0.001), soluble reactive‐P (SRP; R² = 0.91; P < 0.001) and microbial activity measured in terms of fluorescein diacetate activity (FDAase; R² = 0.92; P < 0.001) and substrate induced respiration (SIR; R² = 0.96; P < 0.001). Because point source‐associated interfaces provide heterogeneous habitats, our study suggests the need for large scale monitoring of CO₂ emission at land–water interface of major rivers for more correctly presenting the regional scale CO₂ budget.     

Effect of strontium doping on structural and dielectric behaviour of barium titanate nanoceramics

ABSTRACT

Barium strontium titanate (Ba_(1?x)Sr_xTiO₃ where, x?=?0.0, 0.2, 0.3, 0.4 and 0.5) nanoparticles have been successfully synthesised by sol–gel method and characterised thoroughly. With the increase in Sr concentration (x?>?0.3), the symmetry of the crystal structure changed from tetragonal to cubic phase. The dielectric behaviour of the ceramic nanoparticles was evaluated using impedance analyser with an operating frequency of 1?Hz to 1?MHz. A very high dielectric constant 4915 was obtained for Ba_0.7Sr_0.3TiO₃ at 1?Hz frequency with low dielectric loss of 1.91, which showed very good value than the one previously reported. The density of the material was found to be >98% of theoretical density. Dielectric constants were measured by varying the temperature from 35 to 150°C and the Curie temperatures were also evaluated. The small amount of Sr doping was beneficial for obtaining high dielectric constant material which can be used in various electronic applications.     

Electron transfer reaction and mechanism of oxidation of Inosine

Electrochemical oxidation of Inosine has been studied in the phosphate buffers of pH range 3.3-10.9 at pyrolytic graphite electrode. In the entire pH range a single well-defined oxidation peak (I_a) was observed, when the sweep was initiated in the positive direction. In the reverse sweep no cathodic peak was obtained. The peak potential of the oxidation peak was dependent on pH and shifted to less positive potential with increase in pH. The kinetics of the UV absorbing intermediate was followed spectrophotometrically and the decay occurred in a pseudo first order reaction having k values in the range 0.50-0.92 × 10⁻³ s⁻¹ in the entire pH range studied. The value of n was found to be 2.95 ± 0.3. The products of oxidation were silylated and characterized by using GC-Mass. Two tetramers having CC, CN, NN, CON and COOC linkages were identified. A plausible mechanism for the electrooxidation of Inosine has been suggested.     

Studien zur Biochemie holzzerstörender Pilze—Dritte Mitteilung: Cellulase und Invertase von Polystictus sanguineus und über die mögliche Wirkungsmechanik von Holzschutzmitteln

European Journal of Wood and Wood Products - Im vorigen Teilbericht wurden Untersuchungen über Amylase von zwei Pilzen beschrieben. Der vorliegende Bericht befaßt sich mit Cellulase und...