Performance analysis of three advanced controllers for polymerization batch reactor: An experimental investigation

The performances of three advanced non-linear controllers are analyzed for the optimal set point tracking of styrene free radical polymerization (FRP) in batch reactors. The three controllers are the artificial neural network-based MPC (NN-MPC), the artificial fuzzy logic controller (FLC) as well as the generic model controller (GMC). A recently developed hybrid model (Hosen et al., 2011a. Asia-Pac. J. Chem. Eng. 6(2), 274) is utilized in the control study to design and tune the proposed controllers. The optimal minimum temperature profiles are determined using the Hamiltonian maximum principle. Different types of disturbances are introduced and applied to examine the stability of controller performance. The experimental studies revealed that the performance of the NN-MPC is superior to that of FLC and GMC.     

Genomics and Epigenomics of Gestational Diabetes Mellitus: Understanding the Molecular Pathways of the Disease Pathogenesis

One of the most common complications during pregnancy is gestational diabetes mellitus (GDM), hyperglycemia that occurs for the first time during pregnancy. The condition is multifactorial, caused by an interaction between genetic, epigenetic, and environmental factors. However, the underlying mechanisms responsible for its pathogenesis remain elusive. Moreover, in contrast to several common metabolic disorders, molecular research in GDM is lagging. It is important to recognize that GDM is still commonly diagnosed during the second trimester of pregnancy using the oral glucose tolerance test (OGGT), at a time when both a fetal and maternal pathophysiology is already present, demonstrating the increased blood glucose levels associated with exacerbated insulin resistance. Therefore, early detection of metabolic changes and associated epigenetic and genetic factors that can lead to an improved prediction of adverse pregnancy outcomes and future cardio-metabolic pathologies in GDM women and their children is imperative. Several genomic and epigenetic approaches have been used to identify the genes, genetic variants, metabolic pathways, and epigenetic modifications involved in GDM to determine its etiology. In this article, we explore these factors as well as how their functional effects may contribute to immediate and future pathologies in women with GDM and their offspring from birth to adulthood. We also discuss how these approaches contribute to the changes in different molecular pathways that contribute to the GDM pathogenesis, with a special focus on the development of insulin resistance.     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Mathematical Model for Isothermal Wire-Coating From a Bath of Giesekus Viscoelastic Fluid

A mathematical model of wire-coating based on Giesekus constitutive equation is analyzed under isothermal conditions. It is desired to see the functional dependence of Giesekus model parameters on the important operating variables in the wire-coating process, which include volumetric flow rate (later referred to as flow rate), shear stress at the wire surface (later referred to as shear stress), force required for pulling the wire (later referred to as force), and radius of the coated wire (later referred to as coated wire thickness). To this end, the equation governing the laminar, incompressible, and rectilinear flow is first derived and then solved analytically for the case of vanishing axial pressure gradient. A numerical procedure is described to obtain the solution for the case of nonvanishing pressure gradient. Our results indicate that the magnitude of shear stress and force follow a decreasing trend with increasing Giesekus model parameters in both cases. The flow rate and coated wire thickness decrease on increasing the Giesekus model parameters when there is no imposed pressure gradient. However, in the presence of pressure gradient these variables first decrease with increasing Giesekus model parameters and then follow an increasing trend.     

Effects of Rheological Behavior of Viscoelastic Surfactants on Formation Damage in Carbonate Rocks

Viscoelastic surfactants (VES) are used in various oilfield applications such as matrix stimulation and enhanced oil recovery. The loss of surfactants during the propagation of VES could result in a significant reduction in the permeability of the rock (formation damage). The objective of the current work was to identify the effect of rheological behavior of the VES on the formation damage using core‐flooding experiments, nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM) analysis. A combination of core‐flooding, NMR, and SEM techniques was used to quantify and identify the location of formation damage in carbonate core samples. The viscosity and storage modulus strongly depend on the nature and concentration of salts. The viscosity increased by increasing the salt concentration up to a specific point (15 wt% CaCl₂) and then starts decreasing. The VES formulations that displayed the maximum and minimum viscosities were used to identify the impact of rheological behavior on formation damage. Core‐flooding experiments were performed to assess the formation damage due to high‐viscosity and low‐viscosity VES formulations. The reduction in the permeability of carbonate rocks reaches more than 90% of the initial permeability. It was found that low‐viscosity VES caused more damage compared with high‐viscosity VES when they were used at constant concentrations. NMR and core‐flooding results revealed that the damage took place both in pore body and pore throat. However, most of the surfactant was retained at the pore throat.     

Identification of the flow structures and regime transition in gas–solid fluidized beds through moment analysis

Using statistic parameters of solids holdup signals, a moment consistency data processing method (MCDPM) was proposed. Experiments were carried out using FCC particles of 76 μm under different operating conditions, and MCDPM was used to successfully obtain solids holdups of the dense and dilute phases and the phase fractions over five fluidization regimes, bubbling (BFB), turbulent (TFB), circulating turbulent (CTFB), high‐density circulating (HDCFB), and circulating (CFB) fluidized bed systems. In BFB, TFB, and CTFB regimes, only dense phase fraction decreased with increasing air velocity, while the transition from HDCFB to CFB experienced appreciable change in the solids holdup of the dense phase. From the low‐velocity to the high‐velocity regimes, both the solids holdup and the fraction of the dense phase experienced a drastic decrease, suggesting that this transition corresponded to a profound change in flow structure and further suggesting that CTFB is in reality still a TFB. © 2012 American Institute of Chemical Engineers AIChE J, 59: 1479–1490, 2013     

Innovative nano silicone wax coatings for the conservation of bronze artifacts from corrosion

Journal of Applied Electrochemistry - Herein we studied the efficiency of a protective transparent and reversible nano silicone wax coatings (NSW) to protect bronze artifacts extracted from...     

Effect of multipath fading and multiple access interference on broadband code division multiple access systems

In this paper, the performance of uncoded uplink transmissions in a broadband code division multiple access (CDMA) system using tapped delay line (TDL) antenna array under multipath conditions is investigated. An expression for broadband CDMA system is derived to calculate the optimal weights of TDL antenna array. Using the derived broadband expression, the performance of TDL antenna array is investigated and compared with that of the already existing narrowband systems. Simulation results show that TDL antenna array can reduce multipath fading and multiple access interference (MAI). It is shown that if the signal‐to‐noise ratio (SNR) level is maintained at 20 dB and two‐ray channel model is used, two antennas with four taps each can support 30 users with a BER of 10^?3. If three‐ray channel model is used, the same antenna arrangement is not enough to support 30 users. To support these 30 users with BER of 10^?3, the number of taps needs to be increased to eight. Finally, the number of taps needs to be further increased to 16 if four‐ray channel model is used. Not only that, the SNR should also be increased to 25 dB to achieve the same BER. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of surface treatments on fatigue life of Al 7010 alloy

The objective of the present work is to show the influence of machining and anodizing processes on fatigue life of alloy 7010-T7451. Two different cutting conditions were employed to obtain two different initial surface roughnesses. Degreasing, pickling and anodizing were then carried out. In the as machined condition, surface roughness is clearly effective in reducing fatigue life in this material. As the surface roughness increases fatigue life decreases and this effect is found to be more pronounced in high cycle fatigue where major portion of fatigue life is consumed in nucleating the cracks. Effects of pre-treatments, like degreasing and pickling employed prior to anodizing, on fatigue life of the given alloy were also studied. Fatigue curves showed that pickling had negative impact on fatigue life of specimens while degreasing showed no change in fatigue life. The small decrease in fatigue life of anodized specimens as compare to pickled specimens is attributed to brittle nature and micro-cracking of the coating. Scanning electron microscopic (SEM) examination revealed multi-site crack initiation for the pickled and anodized specimens. SEM examination also showed that pickling process attacked the grain boundaries and the inclusions present on the surface resulting in pits formation. These pits are of primary concern with respect to accelerated fatigue crack nucleation and subsequent anodized coating formation.     

Contrast behavior of a field lens with a wire‐grid PBS

Abstract— In an LCOS projection system, a wire‐grid PBS may be used to improve contrast and a field lens may be employed to simplify the projection lens. However, the combination of the two leads to a reduced contrast, which decreases with increasing field angle in one direction. In a representative arrangement, measured contrast with a mirror varied from over 10,000 in the center to 450 at the left and right edges. Contrast loss can be improved with a weaker field lens. The problem arises due to a phase delay between polarization states introduced by the wire grid. Polarization measurements show a +53‐nm phase delay with an axis parallel to the wire‐grid surface normal. Various compensation schemes are proposed in order to reduce the aforementioned loss of contrast.