Contrast behavior of a field lens with a wire‐grid PBS

Abstract— In an LCOS projection system, a wire‐grid PBS may be used to improve contrast and a field lens may be employed to simplify the projection lens. However, the combination of the two leads to a reduced contrast, which decreases with increasing field angle in one direction. In a representative arrangement, measured contrast with a mirror varied from over 10,000 in the center to 450 at the left and right edges. Contrast loss can be improved with a weaker field lens. The problem arises due to a phase delay between polarization states introduced by the wire grid. Polarization measurements show a +53‐nm phase delay with an axis parallel to the wire‐grid surface normal. Various compensation schemes are proposed in order to reduce the aforementioned loss of contrast.     

The radial spreading as a free surface layer of a vertical buoyant jet

Summary When the rising plume in a stagnant ambient fluid impinges the free surface it spreads radially as a surface layer flowing over a pool of heavier liquid. Initially the surface layer in the entrainment zone entrains the underlying fluid, but the entrainment decreases with the increasing distance from the boil. The radius of the entrainment zone depends on the initial buoyancy flux from the nozzle and also on submergence height. It was assumed that the flow in this zone has a self-preserving form. The theoretical results based upon this assumption showed that the maximum velocity and density difference of the layer decreases as powers of radius distance measured from centre of the boil and the depth varies linearly with the radius, so that the sectional Richardon's number based on maximum physical quantities of the section remain unchanged. It was further shown that the coefficient of the entrainment remains constant and is a function of the Richardson's number and the slope of the interface. The theoretical results were compared with those obtained experimentally and fair agreement was obtained.At the end of the entrainment zone the surface layer enters the zone of homogeneous flow in which the layer travels over the underlying fluid and behaves much like a free homogeneous flow over a rigid boundary: the friction at the interface replacing the friction of the boundary. In this zone the mean velocity of the layer in the radial direction was measured and found that it decreases inversely with the increase of radius. The thickness of the layer in the zone of homogeneous flow remains constant and depends, as far as experiments show, greatly on the submergence height.     

Exploring the conformational space of cyclic peptides by a stochastic search method

A stochastic search algorithm is applied in order to probe the conformations of cyclic peptides. The search is conducted in two stages. In the first stage, random conformations are generated and evaluated by a penalty function for ring closure ability, following a stepwise construction of each amino acid into the peptide by a random choice of one of its allowed conformations. The allowed conformational ranges of backbone dihedral angles for each amino acid have been extracted from a Data Bank of diverse proteins. Values of dihedral angles that do not contribute favorably to the scoring of ring closure are retained or discarded by a statistical test. Values are discarded up to a point from which all remaining combinations of angles are constructed, scored, sorted, and clustered. In the second stage, side chains have been added and fast optimization was applied to the set of diverse conformations in a "united atoms" approach, with the "Kollman forcefield" of Sybyl 6.8. This iterative stochastic elimination algorithm finds the global minimum and most of the best results, when compared to a full exhaustive search in appropriately sized problems. In larger problems, we compare the results to experimental structures. The root mean square deviation (RMSD) of our best results compared to crystal structures of cyclic peptides with sizes from 4 to 15 amino acids are mostly below 1.0 A up to 8 mers and under 2.0 A for larger cyclic peptides.     

An Antilock-Braking Algorithm for an Eddy-Current-Based Brake-By-Wire System

This paper presents a nonlinear sliding-mode-type controller for slip regulation in a braking event for an electromagnetic brake-by-wire (BBW)-system-equipped automobile. The electromagnetic BBW system under consideration consists of a set of eddy current brakes (ECBs) attached to the automobile wheels. The antilock-braking controller modifies the brake torque command generated by a supervisory controller which, in turn, is based on the driver's command sensed via brake pedal sensors. The modified brake torque command is then generated by a closed-loop actuator control algorithm to control the ECB system. It is shown in this paper that the proposed antilock-braking control system is stable in the sense of Lyapunov. Experimental results are presented for a test vehicle equipped with an eddy-current-based BBW system. Experimental results show that the proposed antilock brake control algorithm provides very good slip regulation in a braking event on low friction-coefficient surfaces (wet jennite) when compared with that of a braking event without the proposed antilock-braking control. Experimental results also indicate that the proposed antilock-braking control system provides a smooth stop for the vehicle     

Image-driven virtual simulation of arthroscopy

In recent years, minimally invasive arthroscopic surgery has replaced a number of conventional open orthopedic surgery procedures on joints. While this achieves a number of advantages for the patient, the surgeons have to learn very different skills, since the surgery is performed with special miniature pencil-like tools and cameras inserted through little incisions while observing the surgical field on video monitor. Therefore, virtual reality simulation becomes an alternative to traditional surgical training based on hundreds years old apprentice–master model that involves either real patients or increasingly difficult to procure cadavers. Normally, 3D simulation of the virtual surgical field requires significant efforts from the software developers but yet remains not always photorealistic. In contrast to this, for photorealistic visualization and haptic interaction with the surgical field we propose to use real arthroscopic images augmented with 3D object models. The proposed technique allows for feeling the joint cavity displayed on video monitor as real 3D objects rather than their images while various surgical procedures, such as menisectomy, are simulated in real time. In the preprocessing stage of the proposed approach, the arthroscopic images are stitched into panoramas and augmented with implicitly defined object models representing deformable menisci. In the simulation loop, depth information from the mixed scene is used for haptic rendering. The scene depth map and visual display are reevaluated only when the scene is modified.     

An Empirical Study of Factors Affecting e-Commerce Adoption among Small- and Medium-Sized Enterprises in a Developing Country: Evidence from Malaysia

The purpose of this paper is to empirically examine determinants of e-commerce adoption among Malaysian small- and medium-sized enterprises (SMEs). This study tested eight hypotheses on determinants affecting e-commerce adoption with empirical data from several survey instruments: an online questionnaire-based survey, mailed survey and questionnaire collected in-person from a sample of 307 SMEs in Malaysia. The findings show that e-commerce adoption within Malaysian SMEs is affected by perceived relative advantage, perceived compatibility, managers/owner's knowledge and expertise, management characteristics and external change agents. This study contributes to enhancing the understanding of the determinants of adopting e-commerce in SMEs and provides some interesting perspective from Malaysia. Those parties interested in promoting their business online may find these results helpful in guiding their efforts.     

Processing of metallic fiber hybrid spun yarns for better electrical conductivity

This research was aimed at processing of metallic fiber hybrid spun yarns consisting of polyester/stainless steel and viscose/stainless steel staple fibers to achieve better electrical conductivity. Conventional ring spinning machine and ring twister machine were used to produce the single and plied yarns respectively. The linear electrical resistance of yarns was analyzed with reference to the three levels of twist multiplier (TM) for same yarn count, three levels of yarn fineness (Ne) at the same TM level, and number of plies for the same final yarn count. These results showed that by increasing twist, the electrical conductivity of yarn was increased. However, yarn fineness was in inverse relation with the electrical conductivity of yarns. The effect of yarn plying and twisting to produce the Ne 10s yarn was also found critical in governing the electrical properties. The electrical conductivity of viscose and stainless steel hybrid yarn was found more sensitive to increase with an increase in relative humidity contrary to that of polyester and stainless steel hybrid yarns. The findings of the study are significant to produce the hybrid spun conductive yarns for their potential applications in a variety of tailor-made functional, protective and smart textiles.     

Asynchronous algorithms for poisson's equation with nonlinear boundary conditions

Poisson's equation with nonlinear boundary conditions is discretized with the method of lines to obtain a system of second order differential equations with multi-point boundary conditions. This differential system is converted, using invariant imbedding for each one-dimensional problem, into a fixed point problem and then the asynchronous algorithms are applied.     

Ameliorating Effects of Exogenously Applied Proline on Seed Composition,Seed Oil Quality and Oil Antioxidant Activity of Maize (Zea mays L.) under Drought Stress

This study was carried out to appraise whether or not the exogenous application of a potential osmoprotectant, proline, could ameliorate the adverse effects of drought stress on maize seed and seed oil composition, as well as oil antioxidant activity. Water stress reduced the kernel sugar, oil, protein and moisture contents and most of the seed macro- and micro-elements analyzed in both maize cultivars but it increased the contents of seed fiber and ash. Water stress increased the oil oleic acid content with a subsequent decrease in the amount of linoleic acid, resulting in an increased oil oleic/linoleic ratio for both maize cultivars. However, no variation was observed in oil stearic and palmitic acids content due to water stress. A considerable drought induced an increase in seed oil α-, γ-, δ- and total tocopherols and flavonoids were observed in both maize cultivars. However, oil phenolic and carotenoid content as well as 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging activity decreased. Foliar-applied proline significantly increased the content of seed sugar, oil, protein, moisture, fiber and ash in both maize cultivars under well irrigated and water deficit conditions. Furthermore, exogenous application of proline increased the oil oleic and linoleic acid contents. The concentrations of antioxidant compounds namely phenolics, carotenoids, flavonoids and tocopherols estimated in the seed oil increased due to foliar-applied proline under water deficit conditions that was positively correlated with the enhanced oil DPPH free radical scavenging activity. Moreover, the increase in the contents of these antioxidant compounds and oil antioxidant activity due to the foliar application of proline was noted to be more pronounced under water deficit conditions.     

Development of a semi-quantitative food frequency questionnaire for use in United Arab Emirates and Kuwait based on local foods

Background  

The Food Frequency Questionnaire (FFQ) is one of the most commonly used tools in epidemiologic studies to assess long-term nutritional exposure. The purpose of this study is to describe the development of a culture specific FFQ for Arab populations in the United Arab Emirates (UAE) and Kuwait.