Ammoxidation of toluene over Y-Ba-Cu-Co-O perovskites

Ammoxidation of toluene over the perovskites YBa₂Cu₃O_6.1, YBa₂Cu₂CoO_6.7 and YBaCuCoO_4.9 was investigated at 400 °C. At low partial pressures of O₂ benzonitrile was selectively formed, while CO₂ was the main product at high pressures of O₂. Systematic differences in activity were observed for the three phases and are related to the crystal contents of Cu and Co. At low O₂ pressures, Cu-sites are active for nitrile formation, while Co-sites give CO₂. At high O₂ pressures, the activity for CO₂ of Cu-sites increases more than that of Co-sites due to filling of near-surface oxygen vacancies.     

Bayesian estimation of Dirichlet mixture model with variational inference

In statistical modeling, parameter estimation is an essential and challengeable task. Estimation of the parameters in the Dirichlet mixture model (DMM) is analytically intractable, due to the integral expressions of the gamma function and its corresponding derivatives. We introduce a Bayesian estimation strategy to estimate the posterior distribution of the parameters in DMM. By assuming the gamma distribution as the prior to each parameter, we approximate both the prior and the posterior distribution of the parameters with a product of several mutually independent gamma distributions. The extended factorized approximation method is applied to introduce a single lower-bound to the variational objective function and an analytically tractable estimation solution is derived. Moreover, there is only one function that is maximized during iterations and, therefore, the convergence of the proposed algorithm is theoretically guaranteed. With synthesized data, the proposed method shows the advantages over the EM-based method and the previously proposed Bayesian estimation method. With two important multimedia signal processing applications, the good performance of the proposed Bayesian estimation method is demonstrated.     

Interfacing remote transaction services using UPnP

Transaction execution in mobile environments needs to be flexible, not only to support typical mobile computing characteristics, like movement, disconnections and limited resources, but also to support the variety of transactional properties that might be required by different applications. Existing models for mobile transaction management solve different aspects of transaction execution, but are not flexible enough to solve all required aspects. Instead of designing a new transaction model, we propose a middleware (MobileTSe) which utilize existing transaction models to handle various requirements for mobile transaction execution. This paper presents an approach for flexible transaction processing in mobile applications, and describes how MobileTSe makes transaction services with different properties available on mobile units. We suggest a solution with transaction service discovery and control using UPnP.     

Sensitivity analysis of complex embedded real-time systems

The robustness of an architecture to changes is a major concern in the design of efficient and reliable state-of-the-art embedded real-time systems. Robustness is important during design process to identify if and in how far a system can accommodate later changes or updates, or whether it can be reused in a next generation product. In the product life-cycle, robustness helps the designer to perform changes as a result of product updates, integration of new components and subsystems, or modifications of the environment. In this paper we determine robustness as a performance reserve, the slack in performance before a system fails to meet timing requirements. This is measured as design sensitivity. Due to complex component interactions, resource sharing and functional dependencies, one-dimensional sensitivity analysis might not cover all effects that modifications of one system property may have on system performance. One reason is that the variation of one property can also affect the values of other system properties requiring new approaches to keep track of simultaneous parameter changes. In this paper we present a framework for one-dimensional and multi-dimensional sensitivity analysis of real-time systems. The framework is based on compositional analysis that is scalable to large systems. The one-dimensional sensitivity analysis combines a binary search technique with a set of formal equations derived from the real-time scheduling theory. The multi-dimensional sensitivity analysis engine consists of an exact algorithm that extends the one-dimensional approach, and a stochastic algorithm based on evolutionary search techniques.     

Evalvid-RA: trace driven simulation of rate adaptive MPEG-4 VBR video

Due to the increasing deployment of conversational real-time applications like VoIP and videoconferencing, the Internet is today facing new challenges. Low end-to-end delay is a vital QoS requirement for these applications, and the best effort Internet architecture does not support this natively. The delay and packet loss statistics are directly coupled to the aggregated traffic characteristics when link utilization is close to saturation. In order to investigate the behavior and quality of such applications under heavy network load, it is therefore necessary to create genuine traffic patterns. Trace files of real compressed video and audio are text files containing the number of bytes per video and audio frame. These can serve as material to construct mathematical traffic models. They can also serve as traffic generators in network simulators since they determine the packet sizes and their time schedule. However, to inspect perceived quality, the compressed binary content is needed to ensure decoding of received media. The EvalVid streaming video tool-set enables this using a sophisticated reassembly engine. Nevertheless, there has been a lack of research solutions for rate adaptive media content. The Internet community fears a congestion collapse if the usage of non-adaptive media content continues to grow. This paper presents a solution named Evalvid-RA for the simulation of true rate adaptive video. The solution generates real rate adaptive MPEG-4 streaming traffic, using the quantizer scale for adjusting the sending rate. A feedback based VBR rate controller is used at simulation time, supporting TFRC and a proprietary congestion control system named P-AQM. Example ns-2 simulations of TFRC and P-AQM demonstrate Evalvid-RA’s capabilities in performing close-to-true rate adaptive codec operation with low complexity to enable the simulation of large networks with many adaptive media sources on a single computer.     

Solders development and application process for a micro chip-camera

Nowadays, micro components have to fulfill rising optical requirements for different scientific and industrial fields like astronomy, medicine or multimedia. For this purpose, advanced miniaturized chip-cameras are produced for the microsystems engineering market. The assembly and joining technologies play a very important role in the production of these micro components. Several challenges are associated with the joining of chip-cameras. In this study, the application of the soldering technology has been considered in order to face these challenges. Two joining technologies have been investigated: active soldering and transient liquid phase (TLP) bonding. Both soldering processes have shown a big potential for hybrid microsystems joining in previous studies. For both processes, soldering alloys and parameters have been conceived in order to fulfill the joining requirements of the micro camera components. For instance, the joining temperature represents a major challenge because the chip-camera consists of a plastic material, polymethyl methacrylate (PMMA). Therefore, particular attention has been directed to the soldering as well as to the coating temperature. The experimental investigations concerning the solders application through physical vapor deposition (PVD) have been supported by finite element method (FEM) simulations. The analysis of  the temperature distribution in the micro components during the coating process was the focus of  the calculations. Possible undesirable local overheated areas of the chip-camera components can be detected through simulation.

---

Produktdifferenzierung f��r?Software-as-a-Service-Anbieter

The market for the new provisioning type Software-as-a-Service (SaaS) has reached a significant size and still shows enormous growth rates. By varying size of SaaS products, providers can improve their market position and profits by successfully acting in the tension area of customer acquisition, pricing and costs. We first elaborate differences concerning product differentiation between classic software provisioning models and SaaS. Then, we introduce a micro-economic based decision model to maximize the return of a provider by finding an optimal granularity, i.e. by varying the size of services. This paper makes two contributions in this context: (1) it provides a conceptual foundation for product differentiation within the scope of SaaS and (2) it presents the first implementation of variable reproduction costs for web based software offers. The model is illustrated by a real world case with data from a SaaS provider.     

Will musculoskeletal and visual stress change when Visual Display Unit (VDU) operators move from small offices to an ergonomically optimized office landscape?

This study investigated the effect of moving from small offices to a landscape environment for 19 Visual Display Unit (VDU) operators at Alcatel Denmark AS. The operators reported significantly improved lighting condition and glare situation. Further, visual discomfort was also significantly reduced on a Visual Analogue Scale (VAS). There was no significant correlation between lighting condition and visual discomfort neither in the small offices nor in the office landscape. However, visual discomfort correlated significantly with glare in small offices i.e. more glare is related to more visual discomfort. This correlation disappeared after the lighting system in the office landscape had been improved. There was also a significant correlation between glare and itching of the eyes as well as blurred vision in the small offices, i.e. more glare more visual symptoms. Experience of pain was found to reduce the subjective assessment of work capacity during VDU tasks. There was a significant correlation between visual discomfort and reduced work capacity in small offices and in the office landscape. When moving from the small offices to the office landscape, there was a significant reduction in headache as well as back pain. No significant changes in pain intensity in the neck, shoulder, forearm, and wrist/hand were observed.The pain levels in different body areas were significantly correlated with subjective assessment of reduced work capacity in small offices and in the office landscape.By careful design and construction of an office landscape with regard to lighting and visual conditions, transfer from small offices may be acceptable from a visual-ergonomic point of view.     

Using hash tables to manage the time-storage complexity in a point location problem: Application to explicit model predictive control

The online computational burden of linear model predictive control (MPC) can be moved offline by using multi-parametric programming, so-called explicit MPC. The solution to the explicit MPC problem is a piecewise affine (PWA) state feedback function defined over a polyhedral subdivision of the set of feasible states. The online evaluation of such a control law needs to determine the polyhedral region in which the current state lies. This procedure is called point location; its computational complexity is challenging, and determines the minimum possible sampling time of the system. A new flexible algorithm is proposed which enables the designer to trade off between time and storage complexities. Utilizing the concept of hash tables and the associated hash functions, the proposed method solves an aggregated point location problem that overcomes prohibitive complexity growth with the number of polyhedral regions, while the storage–processing trade-off can be optimized via scaling parameters. The flexibility and power of this approach is supported by several numerical examples.     

Predicting proteinase specificities from free energy calculations

The role of the primary binding residue (P1) in complexes between three different subtilases (subtilisin Carlsberg, thermitase and proteinase K) and their canonical protein inhibitor eglin c have been studied by free energy calculations. Based on the crystal structures of eglin c in complex with subtilisin Carlsberg and thermitase, and a homology model of the eglin c-proteinase K complex, a total of 57 mutants have been constructed and docked into their host proteins. The binding free energy was then calculated using molecular dynamics (MD) simulations combined with the linear interaction energy (LIE) method for all complexes differing only in the nature of the amino acid at the P1 position. LIE calculations for 19 different complexes for each subtilase were thus carried out excluding proline. The effects of substitutions at the P1 position on the binding free energies are found to be very large, and positively charged residues (Arg, Lys and His) are particularly deleterious for all three enzymes. The charged variants of the acidic side chains are found to bind more favorably as compared to their protonated states in all three subtilases. Furthermore, hydrophobic amino acids are accommodated most favorably at the S1-site in all three enzymes. Comparison of the three series of binding free energies shows only minor differences in the 19 computed relative binding free energies among these subtilases. This is further reflected in the correlation coefficient between the 23 relative binding free energies obtained, including the possible protonation states of ionizable side chains, but excluding the P1 Pro, for subtilisin Carlsberg versus thermitase (0.95), subtilisin versus proteinase K (0.94) and thermitase versus proteinase K (0.96).