Increased Postprandial Triglyceride-Rich Lipoprotein Levels in Elderly Survivors of Myocardial Infarction

Postprandial triglyceride-rich lipoproteins (TRL) levels are a predictor for coronary atherosclerosis. The aim of the study was to compare fasting high density lipoprotein (HDL) cholesterol, plasma lipoprotein lipase (LPL) activity, and postprandial TRL between elderly survivors of myocardial infarction (MI) and healthy controls. A case-control study was performed in 44 elderly patients 65-85 years of age with a previous history of MI and 43 age- and sex-matched healthy controls. Each participant underwent physical examination and was given a standard oral fat load with subsequent blood sampling over the next 8 h. Total and chylomicron triglycerides were assessed by area under the curve (AUC), incremental are under the curve (AUCi) and triglyceride response (TGR). Elderly MI patients had significantly lower postheparin LPL activity (87.4 +/- 36.9 mU/ml) (mean +/- 1 SD) than healthy controls (106.0 +/- 29.0 mU/ml) (P = 0.014). Decreased postheparin LPL activity was accompanied by significant increased and delayed clearance of postprandial TRL. Fasting HDL cholesterol was significantly lower in elderly MI patients than controls (1.45 +/- 0.32 and 1.66 +/- 0.47 mmol/l, respectively, P = 0.048). Multiple regression analysis revealed postheparin LPL activity as an independent predictor for postprandial TRL and fasting HDL cholesterol. Logistic regressions analysis revealed HDL cholesterol, triglycerides measured 2 h after the oral fat load, and postheparin LPL activity as independent predictors for MI. Our findings indicate that decreased fasting HDL cholesterol is associated with increased postprandial triglyceridemia which could be a target for life-style and therapeutic interventions in patients at risk for cardiovascular disease.     

On the Synergy Effect in MoO3–Fe2(MoO4)3 Catalysts for Methanol Oxidation to Formaldehyde

Methanol oxidation to formaldehyde was studied over a series of Fe–Mo–O catalysts with various Mo/Fe atomic ratio and the end compositions Fe₂O₃ and MoO₃. The activity data show that the specific activity passes through a maximum with increase of the Mo content and is the highest for Fe₂(MoO₄)₃. The selectivity to formaldehyde, on the other hand, increases with the Mo content in the catalyst. A synergy effect is observed in that a catalyst with the Mo/Fe ratio 2.2 is almost as active as Fe₂(MoO₄)₃ and as selective as MoO₃. Imaging of a MoO₃/Fe₂(MoO₄)₃ catalyst by SEM and TEM shows that the two phases form separate crystals, and HRTEM reveals the presence of an amorphous overlayer on the Fe₂(MoO₄)₃ crystals. EDS line-scan analysis in STEM mode demonstrates that the Mo/Fe ratio in the amorphous layer is ~2.1 in the fresh catalyst and ~1.7 in the aged catalyst. The enrichment of Mo at the catalyst surface is confirmed by XPS data. Raman spectra give evidence for the Mo in the amorphous material being in octahedral coordination, which is in contrast to the crystalline Fe₂(MoO₄)₃ bulk structure where Mo has tetrahedral coordination. X-ray diffraction (XRD) analysis gives no support for the formation of a defective molybdate bulk structure. The results presented give strong support for the Mo rich amorphous structure being observed on the Fe₂(MoO₄)₃ crystal surfaces being the active phase for methanol oxidation to formaldehyde.     

Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation

The resulting surface quality after 5-axis ball end milling is of superior importance because finish milling is often the last process step determining the functional performance of a component. However, the prediction of surface topography is still a challenging task. Especially in ball end milling with the characteristic sickle shaped chip cross section, ploughing effects in the area of low chip thickness result in plastic deformation and surface defects (also known as burr). This paper provides a new approach to predict those surface defects by considering the minimum chip thickness for complex milling engagement conditions within a virtual process design. This allows the choice of suitable process parameters without extensive experimental efforts.     

Effect of Extrusion Profile on Surface Microstructure and Appearance of Aluminum Extrusions with Different Fe Contents

Aluminum alloy extrusions with variations in profiles and Fe-rich particles were produced using different extrusion dies and iron contents. A microstructural examination of the extrusion surface shows that the extrusion profile and iron content have a great effect on the size and number of Fe-rich particles, grain size, texture, and fraction of high-angle grain boundaries due to varying localized plastic deformation and temperature in the extrudate. After etching and anodizing, surface imperfections such as grain boundary grooves that influence the final surface appearance are formed on the extrusion surfaces. The severity of grain boundary grooves is found to be directly linked to the number of Fe-rich particles. Hence, the extrusion profile has a dramatic influence on surface imperfections and the appearance of the final anodized extrusions through its effect on the surface microstructure.     

In situ analysis of the strain evolution during welding using low transformation temperature filler materials

ABSTRACT

Compared to conventional welding consumables using low transformation temperature (LTT) filler materials is an innovative method to mitigate tensile residual stresses due to delayed martensite transformation of the weld. For the effective usage of LTT filler materials, a deeper understanding of the complex processes that lead to the final residual stress state during multi-pass welding is necessary. Transformation kinetics and the strain evolution of multi-pass welds during welding were investigated in situ at the beamline HEMS@PETRAIII, Germany. Compared to conventional welds, the total strain was reduced and compression strain was achieved when using LTT filler materials. For an optimal use of the LTT effect in the root of multi-pass welds, the alloying concept must be adapted taking care of dilution.     

Structural vulnerability of energy distribution systems: Incorporating infrastructural dependencies

In this paper a novel method for assessing the structural vulnerability of two coupled energy distribution systems is presented. The co-existing of an electric power distribution system and a district heating system is described and modelled, under the assumption that the operation of the district heating system is directly dependent on electric power. The structural vulnerability of the two systems subject to single failures or a set of simultaneous failures in the power system is found. Thus, the consequences of power system failures for the energy supply as a whole are quantified.     

Hydro reservoir handling in Norway before and after deregulation

The Norwegian Energy Act that came into force in 1991 deregulated the electricity market and removed the former obligation power companies had to supply electricity to the geographical area they were responsible for. Hence producers can supply electricity on the basis of profitability. In 2007 the Energy Act was evaluated by the Government. As a part of this, a study concerning hydro reservoir handling before and after deregulation was carried out by SINTEF. Public statistics show that average hydro reservoir levels measured in per cent of reservoir capacity have been reduced after 1990. We have used the power-market model EMPS¹ (EFI's Multi-area Power-market Simulator) to analyze if this reduction can be explained by natural variation in climatic variables or by structural changes that have occurred after 1990. Simulation results show that the reduced reservoir levels cannot be explained by natural variation in climatic variables. Structural changes such as increased transmission capacities can, however, explain some of the reduction. Our study does not indicate that the present reservoir handling gives reservoir levels that are too low. In this paper we also describe the stochastic dynamic optimization problem for long-term hydropower scheduling, and we explain how this problem actually is solved by the EMPS model.