Effect of Particle Size on the Dissolution Characteristics of Chlorthalidone

The particle size reduction of chlorthalidone by fluid energy milling, Alpine milling and Fitzpatrick milling were evaluated. The desired particle size was achieved by both the fluid energy milling and Alpine milling processes. Alpine mil1ing, however, is a more complex process and is susceptible to product decomposition, whereas fluid energy milling is a simple and efficient process without any risk of product decomposition. The desired particle size cannot be achieved by Fitzmilling because of the low probability of impaction force on particles. The dissolution rate of the chlorthalidone from chlorthalidone/propranolol hydrochloride tablets (25/80 mg) prepared with fluid energy milled chlorthalidone was significantly better than the tablets prepared with Fitzpatrick - milled chlorthalidone. The minimum effective specific surface area of chlorthalidone needed for maximum dissolution in water was found to be around 3.5 m²/g.     

Catalytic reactions in transport-line reactors

The case of an irreversible first order catalytic reaction is considered in a transport-line reactor, via a model which assumes plug flow of both the solid and gas phases, to investigate reactor performance as a function of major operating variables. Under certain fluid mechanical assumptions, a detailed study is made of the effect of catalyst particle size on reactor conversion.     

Integration of job shop control systems: A state-of-the-art review

This paper reviews important theoretical and practical developments in job shop control. The distinguishing feature of this paper is the identification and summary of important concepts and procedures useful for incorporation into computerized job shop control systems. The first section briefly examines the job shop control problem, and presents a broad outline of commonly used subproblems and methods. A review of the past work done in the areas of scheduling and sequencing, workload balancing, work flow structure analysis, and job shop capability evaluation is then presented. The final section lists important concepts and procedures for developing computer integrated job shop control systems.     

Isothermal diffusion—reaction in a slab catalyst with bimolecular Langmuir-Hinshelwood kinetics: Connections with negative first-order kinetics

The problem of isothermal diffusion-reaction in a slab catalyst with bimolecular Langmuir—Hinshelwood kinetics is studied. Analytic solutions for the concentration profile and the catalytic effectiveness factor are reported for the full range of Thiele modulus values, in the limit of large adsorption inhibition constant. In this limit, connections with negative first-order kinetics are shown, and rather good explicit estimates of the region of multiple steady states are provided. Comparisons with numerical calculations are also made.     

Image processing with VLSI

The development and implementation of systems for the more complex realtime image processing and scene understanding tasks, such as robot vision and remote surveillance, calls for faster computation than that possible using the traditional serial computer. The advent of VLSI has made feasible the consideration of more specialized processing architectures, designed to support these datarates, while keeping systems compact and relatively cheap. Two approaches are discussed: the use of a programmable processor array, and the customizing of image processing algorithms in silicon. This paper examines designs based upon each approach in the light of the techniques and constraints of VLSI. In particular we describe in some detail an example of a VLSI parallel array processor, the Grid (GEC rectangular image and data processor), and a number of special-purpose CMOS/SOS chips based on systolic design techniques.     

Within-Die Gate Delay Variability Measurement Using Reconfigurable Ring Oscillator

We report the design and characterization of a circuit technique to measure the on-chip delay of an individual logic gate (both inverting and noninverting) in its unmodified form. The test circuit comprises of digitally reconfigurable ring oscillator (RO). The gate under test is embedded in each stage of the ring oscillator. A system of linear equations is then formed with different configuration settings of the RO, relating the individual gate delay to the measured period of the RO, whose solution gives the delay of the individual gates. Experimental results from a test chip in 65-nm process node show the feasibility of measuring the delay of an individual inverter to within 1 ps accuracy. Delay measurements of different nominally identical inverters in close physical proximity show variations of up to 28% indicating the large impact of local variations. As a demonstration of this technique, we have studied delay variation with poly-pitch, length of diffusion (LOD) and different orientations of layout in silicon. The proposed technique is quite suitable for early process characterization, monitoring mature process in manufacturing and correlating model-to-hardware.     

Characterization and control of plastic deformation in mesoscale premolded components to realize in‐mold assembled mesoscale revolute joints

This article reports a mold design strategy and a detailed mechanics‐based modeling approach to characterize and control the plastic deformation of premolded components during in‐mold assembly of mesoscale revolute joints. The following new results are reported in this article. First, a mesoscale mold design with varying cavity shape is described to perform in‐mold assembly of the mesoscale revolute joint. Second, a transient computational fluid dynamics (CFD) modeling approach to determine the forces experienced by the mesoscale parts due to injection molding is described. Finally, a mechanics‐based model approach developed using a combination of experimental materials property data and the CFD results as input to a finite element simulation of the deformation response of the mesoscale part is presented for the determination of critical mold design parameters that are necessary for repeatable fabrication of articulating mesoscale revolute joints. Using the advances reported in this article a mesoscale revolute joint has been successfully molded. To the best of our knowledge, this is the first demonstration of in‐mold assembly process using a varying cavity shape mold tocreate an articulating mesoscale revolute joint. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

A New Technique for Coating Silicon Carbide Onto Carbon Nanotubes Using a Polycarbosilane Precursor

Multiwalled carbon nanotubes (MWCNTs) have been coated with silicon carbide (SiC) using polycarbosilane as precursor in order to improve their thermo oxidative stability. The polycarbosilane coated MWCNTs were heated to ~1300°C under an inert atmosphere to generate the SiC coating. X-ray diffraction, energy dispersive X-ray analysis and scanning electron microscopy have confirmed the formation of SiC on the MWCNTs. The retention of the tubular structure of the MWCNTs has been confirmed by transmission electron microscopy. Thermogravimetric analysis has been performed to evaluate the thermo oxidative stabilities of coated and virgin MWCNTs. Sonication studies have shown that the mechanical strength of the MWCNTs was increased after coating with SiC.     

Effects of dietary conjugated linoleic acid on production and metabolic parameters in transition dairy cows grazing fresh pasture

Supplementation with a high dose (600 g/d) of rumen inert conjugated linoleic acids (RI-CLA) inhibits milk fat synthesis in total mixed ration (TMR)-fed dairy cows immediately post partum. However, effects of RI-CLA on milk fat and bioenergetic parameters during the transition period in grazing cows have not been investigated. Multiparous Holstein cows (n=39) grazing pasture were randomly assigned to one of three treatments: (1) pasture (PAS), (2) PAS+540 g/d Hyprofat (palm oil; HYPRO) and (3) PAS+600 g/d RI-CLA. HYPRO and RI-CLA supplements were isoenergetic, fed twice daily at 7.00 and 16.00 and provided 0 and 125 g CLA/d, respectively. Treatments began 27+/-10 d prepartum and continued until 36+/-1 days in milk (DIM). There was little or no overall effect of RI-CLA on content or yield of milk protein and lactose. RI-CLA supplementation decreased overall milk fat content and yield with RI-CLA-induced milk fat depression (MFD) becoming significant by day 3 when compared with PAS and by day 6 when compared with HYPRO. MFD continued to increase in severity during the first 24 d post partum after which MFD reached a plateau (approximately 40%; RI-CLA v. HYPRO). Pasture-fed cows produced less milk (19.4 kg/d) than the lipid-supplemented groups and although there were no overall differences in milk yield between RI-CLA and HYPRO (22.3 kg/d) a curvilinear relationship (R2=0.57) existed between the RI-CLA-induced milk yield response and extent of MFD. RI-CLA tended to increase milk yield (1.8 kg/d) compared with HYPRO until MFD exceeded 35% (approximately day 21), after which point the positive milk yield response was eliminated. Milk fat trans-10, cis-12 CLA content averaged 0.25 g/100 g in the RI-CLA treatment, was temporally independent, and was undetectable in PAS and HYPRO treatments. Based on the milk fat 14ratio1/14ratio0 ratio, RI-CLA decreased the overall Delta9-desaturase system compared with PAS and HYPRO. Compared with HYPRO, RI-CLA had no effect on plasma glucose, insulin, leptin, or NEFA concentrations. Results indicate that a high RI-CLA dose decreases milk fat synthesis and tends to increase milk yield immediately post partum in pasture-fed cows; however, excessive MFD (>35%) appears to be associated with a diminished milk yield response.