Analytical electron microscopy of Al2O3 implanted with iron ions

Single crystals of -Al₂O₃ were implanted with iron ions at room temperature to fluences ranging from 4×10¹⁶ Fe cm^–2 to 1×10¹⁷ Fe cm^–2. The microstructure and composition in the implanted region were examined using analytical electron microscopy techniques. Special emphasis was placed on monitoring the microstructural changes which take place during post-implantation annealing. Clusters of metallic -Fe were identified in the specimen after implantation to a dose of 1×10¹⁷ Fe cm^–2. Analytical electron microscopy of implanted specimens annealed in oxygen revealed the redistribution of the implanted iron and the formation of surface precipitates of -Fe₂O₃, subsurface precipitates of various forms of spinel, and, in some cases, subsurface precipitates of iron, depending on the annealing temperature. Examination of implanted specimens annealed under reducing conditions revealed the presence of precipitates of -Fe.     

Practical observations on the methodology for determining 3-methyl-l-histidine using fluorescamine derivatives

The method for the detection and possible quantification of the unusual amino acid 3-methyl-l-histidine has been refined and elucidated. This is an essential prerequisite for the determination of its value as a robust unequivocal index of lean meat protein.     

On the layer removal analysis of residual stress

The layer removal analysis of residual stress distribution is examined for mouldings which contain depth-varying Young's modulus. The approach is to compute the stress distribution which would be derived from the layer removal procedure if the assumption is made that the Young's modulus is uniform, and to compare it with the actual stress distribution. For this analysis a parabolic stress distribution is assumed to be present, and computed distributions are obtained for two cases, (i) in which the modulus varies linearly from the surface to the centre of the moulding and (ii) in which the modulus has a constant value near to the surface (skin) then changes suddenly to another constant value in the interior (core). The general features of the computed profiles are compared with experimental layer removal analyses conducted on injection-moulded specimens and the extent to which non-uniform modulus influences the results of such studies is discussed.     

Utility,probabilistic constraints,mean and variance of discounted rewards in Markov decision processes

Summary This paper deals with discounted Markov decision processes, Markov with respect to a finite statespaceI, where for eachiI, and each decision epocht, there is a finite action space K(i, t). The paper is concerned with problems which are formulated in terms of the discounted rewards in several ways. In order to ensure that optimal, or near optimal, policies are obtained, the state spaceI is extended to augmented state-spaces A(n), or A(), including the accumulated discounted rewards. Specimen problems are formulated and some computational aspects examined.

---

Zusammenfassung Es werden diskontierte Markovsche Entscheidungsprozesse behandelt mit endlichem Zustandsraum I, wobei die Mengen der zulässigen Entscheidungen K(i, t) vom Zustandi I und vom Zeitpunktt abhängen können. Es werden verschiedene Zielfunktionen betrachtet, die jeweils als Funktion des diskontierten Gesamtgewinns (nicht dessen Erwartungswerts) formuliert werden. Um optimale oder fast-optimale Politiken zu erhalten ohne die gesamte Vorgeschichte zu registrieren, wird der Zustandsraum um die akkumulierten diskontierten Auszahlungen erweitert. Eine Auswahl solcher Probleme wird exemplarisch diskutiert einschließlich einiger Aspekte der numerischen Behandlung.

     

Reward revision and the average reward markov decision process

Summary We integrate two numerical procedures for solving the average reward Markov decision process (MDP), standard successive approximations and modified policy iteration with reward revision. Reward revision is the process of revising the reward structure of a second, more computationally desirable MDP so as to produce, in the limit, an optimality equation having a fixed point identical to that associated with the original MDP. A numerical study indicates that for MDP's having a non-sparse transition structure with a small number of relatively large entries per row, the addition of reward revision can have significant computational benefits.

---

Zusammenfassung Zur Lösung Markovscher Entscheidungsprozesse (MDP) mit Durchschnitts-Kriterium werden zwei numerische Verfahren, nämlich sukzessive Approximation und modifizierte Politik-Iteration, mit einer Transformation, der sogenannten 'Reward-Revision, kombiniert. Bei dieser Transformation werden die Übergangswahrscheinlichkeiten so abgeändert (ausgedünnt), daß das neue Modell sich numerisch günstiger verhält. Dazu müssen die einstufigen Erträge so revidiert werden, daß die Optimalitäts-Gleichung des neuen Modells im Limes mit der des ursprünglichen übereinstimmt. Numerische Untersuchungen zeigen, daß für MDP mit stark besetzten Übergangsmatrizen, bei denen nur an wenigen Stellen je Zeile große Werte stehen, die Anwendung von 'Reward Revision zu wesentlichen Einsparungen an Rechenaufwand führen kann.

---

---

Research supported by NSF Grant ECS-8319355     

Diffusion on Some Simple Stratified Spaces

A variety of different imaging techniques produce data which naturally lie in stratified spaces. These spaces consist of smooth regions of maximal dimension glued together along lower dimensional boundaries. Diffusion processes are important as they can be used to represent noise in statistical models on spaces for which standard parametric probability distributions do not exist. We consider particles undergoing Brownian motion in some low dimensional stratified spaces, and obtain analytic solutions to the heat equation specifying the distribution of particles. These solutions play the role of prototypical distributions for studying behaviour near singularities. While probabilistic reasoning can be used to solve the heat equation in some straightforward cases, more generally we construct solutions from eigenfunctions of the Laplacian. Specifically, we solve the heat equation on: open books; two-dimensional cones; the Petersen graph with unit edge length; and the cone of this graph which corresponds to a space of evolutionary trees.     

Water-induced effects of hydrogen adsorption on Ru(001)

Adsorption and desorption of hydrogen and coadsorption of H₂ with H₂O and CO over Ru(00l) surface have been studied under UHV conditions using the technique of TDS. Surface hydrogen interacts with adsorbed water resulting in an additional desorption state at 510 K which is not easily displaced by CO, but the total number of adsorption sites for hydrogen adsorption is independent of the amount of H₂O predosed at room temperature. Hydrogen adsorption is blocked easily by CO dose (more than 0.5 L) or a small amount of O(a) formed from dissociative adsorption of water, and adsorbed hydrogen formed in the absence of significant water is easily displaced by CO dose at even room temperature.     

Prediction of DNA-binding regulatory proteins in bacteriophage T7

The high-resolution structure of several specific DNA-bindingproteins have been determined, and they display a common structuralmotif which mediates their binding to DNA. This motif consistsof two -helices connected by a sharp turn, and its amino acidsequence has several distinguishing features. A computer searchof the proteins coded by the genome of bacteriophage T7 hasbeen performed in an attempt to identify those proteins thatpotentially contain this motif. Eight proteins were found tohave regions similar to that of the motif. Of these, three arerelatively small, have no known function and are good candidatesfor being DNA-binding regulatory proteins. The methods describeduse commonly available computer programs and databases, andare therefore easy to implement.     

Solvent fractionation of petroleum pitch for mesophase formation

Petroleum pitch (Ashland A240) has been subjected to thermal treatment and solvent fractionation to produce refined pitches to be evaluated as impregnants for C-C composites. The solvent fractions were obtained by sequential Soxhlet extraction with solvents such as hexane, benzene, and pyridine. Thermal treatment to 408 °C produced a mesophase pitch (≈50% mesophase); an appreciable portion of the mesophase was soluble in strong solvents. There were substantial differences in chemical composition and in pyrolysis behaviour of the fractions. As the depth of fraction increased, the pyrolysis yield and bloating increased, and the microstructure of the coke became finer until glassy microconstituents were formed in the deepest fractions.     

Potential uses of kairomones for behavioral manipulation ofCotesia marginiventris (Cresson)

The effects of kairomone pattern and preconditioning on parasitization rates of fall armyworm larvae,Spodoptera frugiperda (J.E. Smith) byCotesia (=Apanteles)marginiventris (Cresson) were investigated in the laboratory and greenhouse using a hexane extract of frass and actual fall armyworm frass. Parasitization rates increased 55 and 26% in Petri dishes and on corn seedlings, respectively, when the entire experimental area was sprayed with the frass extract. Applying the extract in spots resulted in a 20–30% reduction in parasitization compared to treating the entire area. However, spot application produced significantly better parasitization rates compared to the control treatment. Exposing the parasitoids to actual fall armyworm frass resulted in ca. 50% greater retention in the release area and an increase of ca. 60–75% in the number of parasitoids searching.C. marginiventris parasitized factitious hosts topically treated with an extract of fall armyworm frass.Mention of a commercial or proprietary product does not constitute an endorsement by the USDA.Submitted in partial fulfillment of the requirements for the degree Doctor of Philosophy, Department of Entomology and Nematology, University of Florida, Gainesville