Nonlocal thermoelastic model for temperature-dependent thermal conductivity nanobeams due to dynamic varying loads

Microsystem Technologies - The present paper produces a new nonlocal model for thermoelastic nanobeams of temperature-dependent thermal conductivity. A nanobeam excited by harmonically varying heat...     

Data broadcasting strategies for cognitive radio based AMI networks

Wireless Networks - Communication systems play an important role in smart grid (SG). Advanced Metering Infrastructure (AMI) is hybrid architecture in smart grid comprising of smart meters and...     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.     

Artificial Neural Networks for Prediction of COVID-19 in Saudi Arabia

In this study, we have proposed an artificial neural network (ANN) model to estimate and forecast the number of confirmed and recovered cases of COVID-19 in the upcoming days until September 17, 2020. The proposed model is based on the existing data (training data) published in the Saudi Arabia Coronavirus disease (COVID-19) situation—Demographics. The Prey-Predator algorithm is employed for the training. Multilayer perceptron neural network (MLPNN) is used in this study. To improve the performance of MLPNN, we determined the parameters of MLPNN using the prey-predator algorithm (PPA). The proposed model is called the MLPNN–PPA. The performance of the proposed model has been analyzed by the root mean squared error (RMSE) function, and correlation coefficient (R). Furthermore, we tested the proposed model using other existing data recorded in Saudi Arabia (testing data). It is demonstrated that the MLPNN-PPA model has the highest performance in predicting the number of infected and recovering in Saudi Arabia. The results reveal that the number of infected persons will increase in the coming days and become a minimum of 9789. The number of recoveries will be 2000 to 4000 per day.     

Monitoring and control of the oxygen content in heavy liquid-metal coolants for anticorrosion protection of steels

The results of research and development in the field of monitoring and control of oxygen content (thermodynamic activity) in heavy liquid metal coolants (Pb, Pb–Bi) are presented. The properties of lead and eutectics 44.5% Pb–55.5% Bi defining the specific features of their application as coolants in nuclear power plants are considered. Data on oxygen solubility in lead and lead–bismuth melts and the empirical dependences for calculation of the kinetic characteristics of lead oxide dissolution are given. Methods and devices for monitoring and control of the oxygen content (thermodynamic activity) in heavy coolants are considered.     

Investigation of Dissipation,Adsorption, Degradation,and Leaching of Triazophos Pesticide in Various Soils

This study concerns the investigation of dissipation, adsorption, and degradation of triazophos in different soils from Pakistan. These processes help in the disappearance of pesticide from the environment. Gas chromatography was used for dissipation and adsorption analysis while for degradation study mass spectrometer was used in addition of gas chromatography (GC-MS). The dissipation rate of triazophos in three different soils was 90% over 30 days with average half-life of 9.059 days. From dissipation study it was inferred that rate is variable in each soil due to climatic changes, soil nature and soil-pesticide interactions. Adsorption experiment has revealed that the adsorption of this pesticide to soil follows the pseudo first order kinetic model with rate constant value of 0.479/h and Freundlich isotherm with adsorption capacity of 1.832 mol/g. Degradation study has displayed two major metabolites, one is phosphorothioic acid, S-[2-[(1-cyano-1-methylethyl) amino]-2-oxoethyl] O,O-diethyl ester at retention time of 9.136 and the other is sulfotep at 14.304 min. The leaching potential of triazophos was also calculated from its half-life and organic carbon content present in soil which was 1.688 representing it as non leacher pesticide.     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry