Fabrication of Nonadditive Mica Ceramics by Hot Isostatic Processing

Powder compacts of synthetic mica (fluorphlogopite) encapsulated in a boro–silicate glass tube were isostatically hot–pressed in a Roy–Tuttle–type pressure vessel. Synthetic mica was sintered to a density of 2.60 g/cm³ (91.2% of theoretical density) without additives under 98 MPa of water at 800°C for 45 min.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.     

Role of tungsten in promoting selective reduction of NO with CO over Ir/WO3–SiO2 catalysts

Catalytic hydrogenation of naphthalene to decalin was studied over a carbon-supported rhodium catalyst in supercritical carbon dioxide solvent at 333 K, and the results were compared with those in an organic solvent. cis-, trans-Decalin and tetralin were formed from the beginning of the reaction in supercritical carbon dioxide. Higher concentration of hydrogen in carbon dioxide solvent and on the active site, and also the suppression of desorption of partially hydrogenated tetralin molecules from the active site would be responsible for higher selectivity to cis-decalin in supercritical carbon dioxide than that in an organic solvent.     

Strain-induced ordering of microdomain structures in polystyrene-block-polybutadiene-block-polystyrene triblock copolymers cross-linked in the disordered state

Strain-induced ordering of microdomain structures in cross-linked polystyrene-block-polybutadiene-block-polystyrene (SBS) triblock copolymers was examined by the small-angle X-ray scattering technique. To stretch the SBS samples at elevated temperature above the glass transition temperature of polystyrene, polybutadiene blocks were chemically cross-linked in the disordered state. The initial morphology was disorder-like or bicontinuous due to incompletion of microphase separation in the presence of the chemical cross-links. When the cross-linked SBS samples were mechanically stretched at 130 °C and were further annealed for 24 h under a stretched state, the random domain structures ordered gradually and lamellar-like regularity was finally attained. It was found that the ordering proceeded more for the case of the higher strain.     

Fibrous support for immobilization of enzymes

A poly(vinyl alcohol) (PVA) fiber support incorporating various aminoacetal functional groups has been developed for immobilizing enzymes. The aminated PVA fiber seems to adsorb enzymes with electrostatic force of attraction; thus the immobilization procedure is simple. By the use of this fiber having immobilized enzymes, the reaction between enzymes and substrates is nearly independent of the size of subtstrates. This newly developed type of fiber, which is formed by a mass superfine fibers (SFF), each measuring 1 μm or less in diameter, permits much more increased surface area than the conventional enzyme immobilization supports. Our studies of the properties of the fiber for immobilization of enzymes show the following results: (1) SFF has a greater ability for the immobilization of invertase than ordinary fibers; (2) dimethyl-aminated SFF has the best performance for the immobilization of invertase. From these results, it is concluded that the dimethyl-aminated SFF is an excellent support for the immobilization of invertase.     

Synthesis of well-defined poly(styrene)-b-poly(p-tert-butoxystyrene) multiblock copolymer from poly(alkoxyamine) macroinitiator

The stepwise insertion reaction of styrene (St) and p-tert-butoxystyrene (BOSt) into poly(alkoxyamine) macroinitiator was carried out to provide well-defined poly(St)-b-poly(BOSt) multiblock copolymers. Structural confirmation of the multiblock copolymers was accomplished by NMR and IR measurements. The model reaction also supported that the monomer insertion into the macroinitiator proceeded in accordance with a living fashion.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

Sulfur exchange on Co---Mo/Al2O3 hydrodesulfurization catalyst using S radioisotope tracer

A commercial Co---Mo/Al₂O₃ catalyst was labeled with the radioisotope ³⁵S in hydrodesulfurization (HDS) of ³⁵S-labeled dibenzothiophene (³⁵S-DBT) in a high-pressure flow reactor at 50 kg/cm². Then, HDS of 4-methyldibenzothiophene (4-MDBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) or sulfur exchange of H₂S were carried out on the labeled catalyst at 50 kg/cm² and 260–360°C. The amounts of labile sulfur participating in the reaction were determined from the radioactivity of ³⁵S---H₂S released from the ³⁵S-labeled catalyst. In the HDS reactions, the amount of labile sulfur participating in the reaction decreased in the order: DBT> 4-MDBT> 4,6-DMDBT. In the sulfur exchange reaction with H₂S, the adsorption of H₂S on the catalyst reached saturation above a H₂S partial pressure of 0.36 kg/cm². It was suggested that the release of H₂S from the labile sulfur may be the rate determining step of the HDS reaction.