Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

Sustained photobiological hydrogen production in the presence of N2 by nitrogenase mutants of the heterocyst-forming cyanobacterium Anabaena

Heterocyst-forming cells of the cyanobacterium Anabaena sp. strain PCC 7120 ΔHup, lacking an uptake hydrogenase, photobiologically produce H₂ by nitrogenase. Under N₂-rich atmosphere, the nitrogenase activity declines in a rather short time due to the sufficiency of combined nitrogen. From the parental ΔHup strain, site-directed double-crossover variants, dc-Q193S and dc-R284H, were created with amino acid substitutions presumed to be located in the vicinity of the FeMo-cofactor of nitrogenase. Unlike the case for the ΔHup strain, H₂ production activities of the variants were not decreased by the presence of high concentrations of N₂ and they continuously produced H₂ over 21 days with occasional headspace gas replacement. This property of N₂ insensitivity is a potentially useful strategy for reducing the cost of the culture gas in future practical applications of sustainable biofuel production. This Anabaena strain has only the Mo-containing nitrogenase which reduces acetylene to ethylene, but the dc-Q193S variant also produced ethane at low but measurable rates along with greater rates of ethylene production.     

Optical manipulation of multiple stable states in photorefractive four-wave mixing

Abstract

We propose an approach to manipulate the convergence in multiple solutions of phase conjugate reflectivity in photorefractive four-wave mixing. Although a method forcibly adding a π-phase shift to an incident beam has been already proposed to control the reflectivity, some restrictions have been required in the boundary conditions for the successful operation. Here, we control the reflectivity with the boundary conditions in which the phase shift operation is ineffective by itself. In our method, the phase shift operation is combined with the procedure of turning an incident beam on and off. With a numerical analysis of four-wave mixing, we show that our new approach brings drastic change in the spatial distribution of the index grating and leads the phase conjugate reflectivity which was not manipulated previously.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Well‐defined,environment‐friendly synthesis of polypeptides based on phosgene‐free transformation of amino acids into urethane derivatives and their applications

In this study, both naturally occurring and artificial amino acids were successfully transformed into the corresponding urethane derivatives using diphenyl carbonate. The urethanes thus prepared could be efficiently cyclized into amino acid N‐carboxyanhydrides (NCAs) without the requirement of phosgene. In addition, the presence of primary amines converted the urethane derivatives into NCAs and initiated the ring‐opening polymerization of the in situ formed NCAs, allowing for the well‐defined synthesis of polypeptides. These polypeptides contained initiating ends functionalized by an amine‐derived residue and propagating ends bearing the reactive amino group. By precise control of the structures of the polypeptides, various polypeptide conjugates such as block copolymers and graft copolymers were successfully synthesized as designed, and their applications in antifouling coatings against proteins, drug delivery systems and biosensors were demonstrated. © 2019 Society of Chemical Industry     

Estimation of anisotropic properties of nano-structured arrays by modal vibration control at microscale

Nano-structured arrays are engineered to meet the requirements of a variety of applications such as microfilters, sensors, and structural interface due to their unique mechanical characteristics, which cannot be achieved by conventional solid materials. However, it is hard to evaluate the elastic properties of nano-structured arrays owing to the discrete structure, sample size, and availability of suitable techniques. To facilitate this, we develop an advanced three-dimensional microscale vibration testing process. In the test, a specially designed three-dimensional microspecimen with tuned mass is excited by a piezoelectric actuator, and the resonance frequencies are detected by a laser device successfully. The anisotropic elastic moduli of nano-structured array composed of helical nano-springs are identified from a single spectrum. This array shows so strong characteristic anisotropy that the solid one hardly can attain. The microscale testing technique can be extended to other materials and microstructures.     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Thermodynamic Properties of Ionic Semiclathrate Hydrate Formed with Tetrabutylammonium Propionate

The phase equilibrium temperature and dissociation heat of tetrabutylammonium propionate (TBAPr) hydrate are reported. TBAPr hydrate is a type of ionic semiclathrate hydrates and also could potentially be used as thermal energy storage material. The temperature‐composition phase diagram of the TBAPr hydrate was determined in a defined range of mass fractions. Considering the dissociation heat of differential scanning calorimetry (DSC) measurements, multiple peaks of heat flow were observed in the TBAPr‐water system at the TBAPr mass fraction lower than 0.35, and there was a single peak at the mass fraction higher than 0.37.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Density-Functional Theoretical Study on the Role of Lewis and Brønsted Acid Sites on CeO2(110) Surfaces for Nitrile Hydration

Hydration of cyanopyridine on CeO₂(110) surfaces was studied using periodic DFT+U calculations. One of two adsorption modes of 2-cyanopyridine occurs with two-point interaction which causes substrate specificity. A catalytic cycle for the hydration of 2-cyanopyridine was proposed. Cooperativity of Lewis and Brønsted acid sites was found to stabilize the intermediates for the hydration.