Optimization of Enzymatic Process Condition for Protein Enrichment,Sugar Recovery and Digestibility Improvement of Soy Flour

Soy protein is a valuable nutritional supplement for food and animal feed. While protein constitutes ~50 % of defatted soy flour (SF), it coexists with complex carbohydrates (30–35 %) which may have anti‐nutritional effects. An enzymatic process can remove the carbohydrate and produce protein‐enriched soy products. The hydrolysate with monomerized carbohydrates is valuable fermentation feedstock. In this study, Aspergillus niger and Trichoderma reesei enzymes were compared for use in the process. Effects of pH (3.2–6.4), temperature (40–60 °C), enzyme‐to‐SF ratio (0–2 ml/g) and SF loading (150–350 g/l) were evaluated for the enzymatic conversion of SF carbohydrate to reducing sugar (Y_RS) and total soluble carbohydrate (Y_TC) in the hydrolysate. Effects of these single factors and interactions between factors were investigated. Optimal pH and temperature were similar for both enzymes: pH 4.8 and 50–51 °C for Y_TC, and pH 5.1–5.2 and 48–51 °C for Y_RS. The two enzymes also gave similar protein contents in resultant soy protein concentrates, i.e., 74–75 % with 2 ml/g enzyme broth and 150 g/l SF, which were higher than the 64–68 % protein in commercial concentrates. A. niger enzyme was significantly more effective in carbohydrate conversion, achieving Y_RS = 75 % and Y_TC = 78 % with 2 ml/g enzyme and 150 g/l SF, higher than the Y_RS (30 %) and Y_TC (64 %) obtained with T. reesei enzyme. Monomerization was essentially complete in hydrolysate produced with A. niger enzyme.     

Comprehensive and Facile Synthesis of Some Functionalized Bis-Heterocyclic Compounds Containing a Thieno[2,3-b]thiophene Motif

A comprehensive and facile method for the synthesis of new functionalized bis-heterocyclic compounds containing a thieno[2,3-b]thiophene motif is described. The hitherto unknown bis-pyrazolothieno[2,3-b]thiophene derivatives 2a-c, bis-pyridazin othieno[2,3-b]thiophene derivatives 4, bis-pyridinothieno[2,3-b]thiophene derivatives 6a,b, and to an analogous bis-pyridinothieno[2,3-b]thiophene nitrile derivatives 7 are obtained. Additionally, the novel bis-pyradazinonothieno[2,3-b]thiophene derivatives 9, and nicotinic acid derivatives 10, 11 are obtained via bis-dienamide 8. The structures of all newly synthesized compounds have been elucidated by (1)H, (13)C NMR, GCMS, and IR spectrometry. These compounds represent a new class of sulfur and Nitrogen containing heterocycles that should also be of interest as new materials.     

Synthesis and Characterization of Privileged Monodentate Phosphoramidite Ligands and Chiral Brønsted Acids Derived from d-Mannitol

The synthesis of several novel chiral phosphoramidite ligands (L1–L8) with C₂ symmetric, pseudo C₂ symmetric secondary amines and chiral Brønsted acids 1a,b has been achieved. These chiral auxiliaries were obtained from commercially available d-mannitol, and secondary amines in moderate to excellent yields. Excellent diastereoselectivites of ten chiral auxiliaries were obtained. The chiral phosphoramidite ligands and chiral Brønsted acids were fully characterized by spectroscopic methods.     

Effects of functionalization conditions of sulfonic acid grafted SBA-15 on catalytic activity in the esterification of glycerol to monoglyceride: a factorial design approach

A series of propyl sulfonic acid-modified SBA-15 catalysts (SBA-15SO₃H) was prepared under various conditions using post-functionalization approach. A factorial design coupled with response surface analysis were employed to evaluate the effects of the preparation conditions on the catalyst activity. Optimization of the conditions to find the most active SBA-15SO₃H catalyst with the highest activity in glycerol esterification with lauric acid at 160?°C for 6?h was also made. Amount of 3-(mercaptopropyl)trimethoxysilane (MPTMS) and reflux time were chosen as parameters of the preparation conditions. The presence of propyl sulfonic acid groups in SBA-15SO₃H catalysts was confirmed by FT-TIR method. The catalysts were also characterized by means of surface analysis, XRD, TEM and TGA. The results obtained from the statistical models suggested that the amount of MPTMS was more important parameter to influence the activity compared to the reflux time. The optimum preparation condition was achieved at a reflux time of 20?h and an MPTMS amount of 1?mL/gram SBA-15 to obtain the SBA-15SO₃H(1) with the highest monoglyceride selectivity (70.2%) and corresponding lauric acid conversion (95%) in the esterification process.     

Influence of Single-Walled Carbon Nanotubes on the Performance of Poly(Azomethine-Ether) Composite Materials

The present work is aimed to fabricate a new set of composite materials containing conducting poly(azomethine-ether) reinforced with single-walled carbon nanotubes in the form of single-walled carbon nanotube/poly(azomethine-ether)_1–5 for excellent enhanced thermal as well as conducting behavior of poly(azomethine-ether). Single-walled carbon nanotubes of variable loading have been embedded into conducting poly(azomethine-ether) using in situ polymerization technique. Before attempting the polymerization, 1,3-thiazole established poly(azomethine-ether) and its conformable monomers have been prepared and their chemical structures have been correlated by spectral analyses. Furthermore, η_inh and M_w values for poly(azomethine-ether) were found 0.89?dL?g^?1 and 39723.6, respectively. The fabricated single-walled carbon nanotube/poly(azomethine-ether)_1–5 composites were specified and characterized by wide-angle X-ray diffraction patterns, Fourier transform infrared spectroscopy, thermal behavior, scanning electron microscopy, and transmission electron microscopy characterization techniques. A perfect indicative response for this composite material was estimated by Fourier transform infrared spectra and X-ray diffraction as well. Both techniques displayed all intensive characteristic peaks regarding single-walled carbon nanotubes and poly(azomethine-ether) in the spectra or diffraction pattern for single-walled carbon nanotube/poly(azomethine-ether)_1–5. The role of single-walled carbon nanotubes on the performance of poly(azomethine-ether) was considerably examined. Single-walled carbon nanotube/poly(azomethine-ether)_1–5 showed relatively higher thermal stability. Single-walled carbon nanotube/poly(azomethine-ether)₁ displayed the lowest final composite degradation temperature value (552°C), whereas single-walled carbon nanotube/poly(azomethine-ether)₅ displayed the highest value (621°C). T₁₀ and T₂₅ values showed a gradual temperature increased while single-walled carbon nanotubes increased. Single-walled carbon nanotube/poly(azomethine-ether)₁ showed the lowest thermal stability and single-walled carbon nanotube/poly(azomethine-ether)₅ showed the highest thermal stability between all fabricated products. Furthermore, transmission electron microscopy images showed a prominent increase in single-walled carbon nanotubes diameters (40–60?nm). The conductivity values were significantly increased while single-walled carbon nanotubes content was increased and reached to the semiconductors. ε′ values were also increased in both single-walled carbon nanotube/poly(azomethine-ether)_4,5 which have higher single-walled carbon nanotubes content.     

Compressive mechanical properties of sawdust/high density polyethylene composites under various strain rate loadings

This article is concerned with the static and dynamic mechanical properties of high‐density polyethylene (HDPE) reinforced with sawdust (SD) at a strain rate of up to 10³ s^?1. In this study, the static and dynamic properties of HDPE/SD composites with different filler loadings of 5, 10, 15, 20, and 30 wt% SD were deliberated at different levels of strain rates (0.001, 0.01, 0.1, 650, 900, and 1100 s^?1) using a conventional universal testing machine and the split Hopkinson pressure bar apparatus. The results showed that the stress–strain curves, yield behavior, stiffness, and strength properties of the HDPE/SD composites were strongly affected by both the strain rate and the filler loadings. Furthermore, the rate sensitivityof the HDPE/SD composites showed a great dependency on the applied strain rate, increasing as the strain rate increased. However, the thermal activation values showed a contrary trend. Meanwhile, for the postdamage analysis, the results showed that the applied strain rates influenced the deformation behavior of the tested HDPE/SD composites. Moreover, for the fractographic analysis at dynamic loading, the composites showed that all the specimens underwent a severe catastrophic deformation. J. VINYL ADDIT. TECHNOL., 24:162–173, 2018. © 2016 Society of Plastics Engineers     

Synthesis of poly(acrylonitrile‐co‐divinylbenzene‐co‐vinylbenzyl chloride)‐derived hypercrosslinked polymer microspheres and a preliminary evaluation of their potential for the solid‐phase capture of pharmaceuticals

Poly[acrylonitrile (AN)‐co‐divinylbenzene (DVB)‐co‐vinylbenzyl chloride (VBC)] terpolymers were synthesized by precipitation polymerization in the form of porous polymer microspheres. The poly(AN‐co‐DVB‐co‐VBC) polymers were then hypercrosslinked, via a Friedel‐Crafts reaction with FeCl₃ in nitrobenzene, to provide a significant uplift in the specific surface areas of the polymers. FTIR spectra of the hypercrosslinked poly(AN‐co‐DVB‐co‐VBC)s showed that the chloromethyl groups derived from VBC were consumed by the Friedel‐Crafts reactions, which was consistent with successful hypercrosslinking. Hypercrosslinking installed a number of new, small pores into the polymers, as evidenced by a dramatic increase in the specific surface areas upon hypercrosslinking (from ～530 to 1080 m² g^?1). The hypercrosslinked polymers are very interesting for a range of applications, not least of all for solid‐phase extraction (SPE) work, where the convenient physical form of the polymers (beaded format), their low mean particle diameters, and narrow particle size distributions, as well as their high specific surface areas and polar character (arising from the AN residues), make them attractive candidates as SPE sorbents. In this regard, in a preliminary study one of the hypercrosslinked polymers was utilized as an SPE sorbent for the capture of the polar pharmaceutical diclofenac from a polar environment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45677.     

Hollow micro-mesoporous carbon polyhedra produced by selective removal of skeletal scaffolds

An approach has been demonstrated for fabricating hollow micro-mesoporous carbon polyhedra by selective removal of the skeletal scaffolds of polyurethane (PU) foam in monolithic mesostructured resin/PU composites. Hollow micro-mesoporous carbon polyhedra with an irregular shape molded from the cellular cavities of PU foam were synthesized by using phenolic resol as a precursor, triblock copolymer Pluronic F127 as a template, PU foam as a skeletal scaffold and triethyl phosphate as a reaction agent. By a reaction with triethyl phosphate, the PU foam in resin/PU composites can be degraded, simultaneously leading to the disassembly of the monolithic structure into separated polyhedral particles. The method can also be used for synthesizing hollow micro-mesoporous carbon–silica polyhedra, using tetraethyl orthosilicate as a silica source. Moreover, after etching the silica away, hollow micro-mesoporous carbon polyhedra with an ordered hexagonal mesostructure (space group p6mm), large particle sizes of 65–500 μm, a large surface area of 1384 m² g^?1, a uniform pore size of 3.2 nm and a high pore volume of 1.15 cm³ g^?1 as well as a high mesoporosity of 81% can be obtained, which exhibits excellent adsorption performance toward methylene blue compared with the active carbon having a similar surface area.