A 10-Gb/s (1.25 Gb/s×8)4×2 0.25-μm CMOS/SIMOX ATMswitch based on scalable distributed arbitration

This paper presents the design and implementation of a scalable asynchronous transfer mode switch. We fabricated a 10-Gb/s 4×2 switch large-scale integration (LSI) that uses a new distributed contention control technique that allows the switch LSI to be expanded. The developed contention control is executed in a distributed manner at each switch LSI, and the contention control time does not depend on the number of connected switch LSI's. To increase the LSI throughput and reduce the power consumption, we used 0.25-μm CMOS/SIMOX (separation by implanted oxygen) technology, which enables us to make 221 pseudo-emitter-coupled-logic I/O pins with 1.25-Gb/s throughput. In addition, power consumption of 7 W is achieved by operating the CMOS/SIMOX gates at -2.0 V. This consumption is 36% less than that of bulk CMOS gates (11 W) at the same speed at -2.5 V. Using these switch LSI's, an 8×8 switching multichip module with 80-Gb/s throughput was fabricated with a compact size     

Scalable 10 Gbit/s 4×20.25 μm CMOS/SIMOX ATM switch LSIcircuit based on distributed contention control

A scalable 10 Gbit/s 4×2 ATM switch LSI circuit has been fabricated. It employs a new distributed contention control technique that makes the LSI circuit expandable. To increase the LSI circuit throughput, 0.2 μm CMOS/SIMOX (separation by implanted oxygen) technology is used. It allows the LSI circuit to offer 221 I/O pins, an operating speed of 1.25 Gbit/s and 7 W power consumption     

Secondary electron emission in scanning Ga ion, He ion and electron microscopes

The secondary electron (SE) emission for Ga ion, He ion and electron impact have been calculated using Monte-Carlo simulations, in which the trajectories of all the collision partners (i.e., primary ions, recoiled target atoms, and excited electrons (electron cascade) along which SEs are excited) have been simulated. The SE yields for Ga ion impact show a gradual decrease with increasing Z₂ which is opposite to that found for electron impact. The main reasons for the decrease in SE yield for Ga are the decrease in number and energy of electrons excited by the primary ions and the decrease in contribution of the recoiled atoms to the SE yield with increasing Z₂. For electron impact, both primary electrons and backscattered electrons (BSEs) excite the SEs. The additional SE excitation created by the electron cascade by BSEs is enhanced for high-Z₂ metals especially at E > a few keV. For He ion impact, the Z₂-dependence is between that for the Ga ions and the electrons and is weak because the He ion is light but still much heavier than an electron. As to the lateral resolution, the electron excitations by trapped He ions dominate the SE yield, so that the SE excitation volume is narrower than for electron and Ga impacts. This small contribution of BS He ions to the SE yield does not increase the information depth determined by the trapped He ions, in contrast with the large contribution of BSEs to the SE yields for SEM imaging. The simulated incident-angle dependence in SE yields shows that the topography contrast for He-SIM imaging is clearer than that obtained by SEM and Ga-SIM imaging.     

Novel gold-capped nanopillars imprinted on a polymer film for highly sensitive plasmonic biosensing

Herein, a nanoporous alumina was fabricated to use as a mold in transforming nanopillar structures onto a thin film polymer by thermal nanoimprint lithography (NIL). The size of the pores was successfully controlled by varying the applied voltages and etching time. These nanoporous structures were transferred to the Cyclo-olefin polymer (COP) film surface from the porous mold by a thermal nanoimprinting process. A plasmonic substrate was fabricated by sputtering a thin layer of gold onto this nanopillar polymer structure, and the refractive index response in a variety of media was evaluated. Finally, the biosensing capacity of this novel plasmonic substrate was verified by analysis of Human immunoglobulin and achieved a minimum detection limit of 1.0 ng/mL. With the advantages of mass production with consistent reproducibility stemming from the nanoimprint fabrication process, our gold-capped polymeric pillars are ready for the transition from academic interest into commercialization systems for practical use in diagnostic applications.     

Antimicrobial susceptibilities of Salmonella isolates obtained from layer chicken houses on a commercial egg-producing farm in Japan, 1997 to 2002

Susceptibility to antimicrobial agents was examined for 325 isolates of Salmonella enterica serotypes Cerro, Infantis, Livingstone, and Montevideo isolated from layer houses on a commercial egg-production farm in the western region of Japan between 1997 and 2002. No antimicrobials were used for therapeutic purposes on the farm during this period. From 1.8 to 3.1% of the isolates were resistant to ampicillin, chloramphenicol, and tetracycline. Resistance to streptomycin and sulfisoxazole was found in 52.9 and 65.5%, respectively, of Salmonella Montevideo isolates and in 0 to 13.2% of the isolates of the other serotypes. All the streptomycin-resistant isolates of Salmonella Montevideo also exhibited resistance to sulfisoxazole. Salmonella Montevideo isolates were first isolated in 1998, and 80.0% of the isolates obtained in this year were resistant to streptomycin and sulfisoxazole. The results suggest that Salmonella Montevideo isolates that had already acquired resistance may have been introduced into the layer houses, although the route and vehicle of transmission were uncertain. The proportion of Salmonella Montevideo isolates resistant to streptomycin and sulfisoxazole significantly decreased (P < 0.01) from 79.5% for 1998 through 1999 to 37.3% for 2000 through 2002. This decrease probably was due to the fact that no antimicrobials were used on the farm. Among 10 isolates from different serotypes obtained from 1997 to 2002 that were resistant to ampicillin, two and five isolates harbored 42- and 63-kb R plasmids and identical DraI restriction enzyme digest patterns, respectively, and carried the blaTEM gene. The results suggest that the ampicillin resistance determinants were transferred among different serotypes of Salmonella in the layer houses.     

Determination of brilliant blue FCF in the presence and absence of erythrosine and quinoline yellow food colours by cathodic stripping voltammetry

A study of the voltammetric behaviour of the food colours brilliant blue FCF (C.I. 42090), erythrosine (C.I. 45430) and quinoline yellow (C.I. 47005) in the pH range 2-10 have been carried out by cathodic stripping voltammetry. At pH 4.5 (acetate buffer) with an accumulation potential of 0V and accumulation time of 30s, the voltammograms presented well-defined reduction peaks at potential - 0.76V for brilliant blue FCF, - 0.85V for quinoline yellow and - 0.54V for erythrosine. Linear calibration graphs were obtained from 8 to 80 μg l^-1 brilliant blue, from 4 to 43 μg l^-1 quinoline yellow and from 10 to 70 μg l^-1 erythrosine. The method has been successfully applied to identify and quantify binary mixtures of these dyes and applied for determining brilliant blue FCF in commercial food products.     

Safety and structural analysis of polymers produced in manufacturing process of alpha-lipoic acid

Alpha-Lipoic acid has recently been permitted for use in foodstuffs and is contained in tablets and capsules. Although alpha-lipoic acid is synthesized from adipic acid, the safety of polymers produced during the purification and drying processes has been an issue of concern. Hence, we examined the safety profiles of thermally denatured polymer (LAP-A) and ethanol-denatured polymer (LAP-B) produced in the manufacturing process of alpha-lipoic acid. Furthermore, we conducted structural analysis of these polymers by 1H-NMR and FAB-MS spectroscopy. In a consecutive ingestion test, male and female mice ingested diet containing 0.1 and 0.2% LAP-A and -B for 4 weeks. Blood uric acid, potassium and lactate dehydrogenase (LDH) tended to increase without dose-dependency. Relative liver weights were also increased. However, male dogs that were orally administered LAP-B (500 mg/kg) once did not show any abnormalities in blood parameters or general condition. These findings indicate that alpha-lipoic acid polymers are not acutely toxic; however, chronic ingestion of these polymers may affect liver and kidney functions.     

Efficient synthesis of nonnatural mutants in Escherichia coli S30 in vitro protein synthesizing system

Factors that affect the efficiency of in vitro synthesis of mutant proteins that contain nonnatural amino acids were investigated. The process of the nonnatural mutagenesis consists of chemical aminoacylation of a tRNA that contains a 4-base anticodon, followed by in vitro synthesis in the presence of an mRNA that contains the corresponding 4-base codon. Detailed studies on the time courses of the synthesis revealed two major factors that suppress the yield of nonnatural mutants compared with the wild-type protein. First, a cyclic tRNA that exists as a by-product of the chemical aminoacylation inhibits the protein synthesis. Second, the very short lifetime of a tRNA aminoacylated with a nonnatural amino acid limits the protein yield. As a simple and practical way of surmounting these factors, aminoacyl tRNA was added into the in vitro system at 5 min after the start of the synthesis. The addition increased the protein yield up to the level of conventional proteins in the in vitro system.