An estimation method for the free-space antenna factor of VHF EMI antennas

A novel numerical method is developed for theoretically estimating the free-space antenna factor of an electromagnetic interference (EMI) antenna, especially for the very high frequency (VHF) range where traditional methods are difficult to apply. It requires conventional EMI antenna calibration such as the standard antenna method to obtain the antenna factor of an antenna under calibration as a function of the antenna height. Then, a nonlinear least-squares method is applied to the calibration results to estimate the free-space antenna factor. It is found that the proposed method can yield more accurate estimates of the free-space antenna factor than the averaging method. Attainable accuracy of this method is better than 0.2 dB for tuned dipole antennas and 0.1 dB for biconical antennas and biconi-log antennas. The paper outlines the theoretical background and the validity of this method, with the attainable accuracy demonstrated using method of moments simulations.     

Multiple-availability-level ATM network architecture

Because of their high flexibility, ATM networks have the potential to achieve two objectives: switch cost reduction and multi-level network availability. For that purpose, this article proposes to use virtual circuit (VC) route self-healing schemes to achieve a multiple-availability-level ATM network. Flexible multi-QoS logical ATM network (Full-Net), a new concept for ATM networks, is now being studied at NTT Laboratories. Full-Net is a very flexible network design strategy for survivable networks that is based on a self-healing VC network. Defining several logical configurations of the VC network allows us to support multiple levels of network availability, simplifies the adaptation to future and unknown service requirements, and significantly reduces overall ATM network cost. Offering different levels of availability not only saves the network's resources, but also allows the network operator to provide its customers with services at the most appropriate cost. We introduce the advantages of VC route restoration for ATM networks, and compare virtual path (VP) level and physical level restoration strategies. We explain Full-Net's concept, propose a VC route self-healing scheme, and show the impact of the logical network configurations on network survivability and resource management     

A single-chip digitally calibrated 5.15-5.825-GHz 0.18-/spl mu/m CMOS transceiver for 802.11a wireless LAN

The drive for cost reduction has led to the use of CMOS technology in the implementation of highly integrated radios. This paper presents a single-chip 5-GHz fully integrated direct conversion transceiver for IEEE 802.11a WLAN systems, manufactured in 0.18-/spl mu/m CMOS. The IC features an innovative system architecture which takes advantage of the computing resources of the digital companion chip in order to eliminate I/Q mismatch and achieve accurately matched baseband filters. The integrated voltage-controlled oscillator and synthesizer achieve an integrated phase noise of less than 0.8/spl deg/ rms. The receiver has an overall noise figure of 5.2 dB and achieves sensitivity of -75 dBm at 54-Mb/s operation, both referred to the IC input. The transmit error vector magnitude is -33 dB at -5-dBm output power from the integrated power-amplifier driver amplifier. The transceiver occupies an area of 18.5 mm/sup 2/.     

640-Gb/s high-speed ATM switching system based on 0.25-μm CMOS,MCM-C, and optical WDM interconnection

A 640-Gb/s high-speed ATM switching system that is based on the technologies of advanced MCM-C, 0.25-μm CMOS, and optical wavelength-division-multiplexing (WDM) interconnection is fabricated for future broadband backbone networks. A 40-layer, 160×114 mm ceramic MCM forms the basic ATM switch module with 80-Gb/s throughput. It consists of 8 advanced 0.25-μm CMOS LSIs and 32 I/O bipolar LSIs. The MCM has a 7-layer high-speed signal line structure having 50-Ω strip lines, high-speed signal lines, and 33 power supply layers formed using 50-μm thick ceramic layers to achieve high capacity. A uniquely structured closed-loop-type liquid cooling system for the MCM is used to cope with its high power dissipation of 230 W. A three-stage ATM switch is made using the optical WDM interconnection between high-performance MCMs. For WDM interconnection, newly developed compact 10-Gb/s, 8-WDM optical transmitter and receiver modules are used. These modules are each only 80×120×20 mm and dissipate 9.65 W and 22.5 W, respectively. They have a special chassis for cooling, which contains high-performance heat-conductive plates and micro-fans. An optical WDM router based on an arrayed waveguide router is used for mesh interconnection of boards. The optical WDM interconnect has 640-Gb/s throughput and simple interconnection     

High-power CW-DFB laser diode modules for CATV applications operating at 1550 nm

Investigation of the correlation between longitudinal photon density distribution and spectral linewidth re-broadening, in conjunction with carefully designed coupling optics, enable laser modules that simultaneously achieve very high fibre-coupled power of 175 mW and very narrow linewidth<1 MHz even at /spl sim/120 mW of output power to be successfully fabricated.     

Physical and functional interactions between the herpes simplex virus UL15 and UL28 DNA cleavage and packaging proteins

Herpes simplex virus (HSV) DNA is cleaved from concatemers and packaged into capsids in infected cell nuclei. This process requires seven viral proteins, including UL15 and UL28. UL15 expressed alone displays a nuclear localization, while UL28 remains cytoplasmic. Coexpression with UL15 enables UL28 to enter nuclei, suggesting an interaction between the two proteins. Additionally, UL28 copurified with UL15 from HSV-infected cells after ion-exchange and DNA affinity chromatography, and the complex sedimented as a 1:1 heterodimer upon sucrose gradient centrifugation. These findings are evidence of a physical interaction of UL15 and UL28 and a functional role for UL15 in directing UL28 to the nucleus.     

Catalytic properties of metal loaded silica-pillared manganese titanate for CO oxidation

Semiconducting microporous solids were prepared by pillaring layer structured manganese titanate, Rb_xMn_xTi_2−xO₄ (x=0.75) with silica. These solids were then chemically modified by loading various kinds of metals by cation exchange and impregnation methods. The samples with copper loaded by the impregnation method showed a high catalytic activity for the oxidation of carbon monoxide with oxygen. The highest activity was obtained for the sample with the copper content, [Cu]/[Cu+Mn]≈0.3; the CO conversion of more than 90% was achieved at 60°C. The high catalytic activity is attributed to the microporous pillared structure with a high porosity and the charge transfer between copper and the manganese titanate layers.     

Dependence of vacancy concentration on morphology of helium bubbles in oxide ceramics

Since the formation of helium bubbles degrades swelling property and thermal conductivity of minor actinide-containing mixed oxide (MA-MOX) fuel, it is essential to understand the conditions of the bubble formation. In order to examine the dependence of vacancy concentration on morphology of helium bubbles, helium was infused into (Zr,Fe)O_2?x. The oxygen vacancy concentration was controlled by addition of solute Fe³⁺ into ZrO₂. Helium was infused by hot isostatic pressing. The helium-infused specimens were observed by field emission scanning electron microscopy (FE-SEM) and field emission transmission electron microscopy (FE-TEM). In addition, X-ray fluorescence, X-ray diffraction analysis, conversion electron yield–X-ray absorption near-edge structure and FE-SEM/EDX (energy dispersive X-ray) analyses were also made to interpret the results of microstructure observations. As a result of the helium infusion treatment, numerous 0.5–10 nm bubbles were observed and its number density clearly depended on oxygen vacancy concentration. On the other hand, sizes of the helium nano-bubbles in all specimens were almost constant.     

Superconductivity in electron-doped layer-structured nitride halides

New types of quasi two-dimensional superconductors have been developed. They consist of metal nitride layers sandwiched by halogen layers. On electron doping by the intercalation of alkali metals between the halide layers, the compounds changed into metals and showed superconductivity at relatively high transition temperatures up to 25.5 K. The newly developed superconductors show novel characteristics which cannot be interpreted by a conventional BCS concept.     

Use of residual voltage for diagnosis of electrical power cables used in nuclear power stations

This paper describes the fundamental characteristics of the residual voltage and the relationship between irradiation dose and residual voltage in electric power cable used in nuclear power generating stations. The residual voltage of unirradiated cable increases with time, tending to saturate. The saturated value of residual voltage is nearly proportional to bias voltage. This result supports the residual voltage of cable being caused by depolarization. From theoretical and experimental investigations we found that the residual voltage is not influenced by cable size or length. This is an important merit of residual voltage as the nondestructive diagnosis. When dose is more than 500 kGy, the residual voltages exhibit a peak. As the irradiation dose is increased, the peak moves to shorter time. Therefore, we can determine the degree of radiation degradation from the location of the peak. © 1997 Scripta Technica, Inc. Electr Eng Jpn 119(2): 18–25, 1997