Physico-Chemical Properties of the Egyptian Tamarind Seed Oil

The physico-chemical properties of the Egyptian Tamarind seed oil were investigated. The seeds were found to contain a fair amount of oil (16.25%). It was found that the oil has a high acid and iodine values in comparison with cotton seed oil. Arachidic, linoleic, oleic, stearic, palmitic, myristic, and lauric were fractionated by gas liquid chromatography from the tamarind seed oil. More than 50% of the total acids are unsaturated. The infrared spectroscopy showed the presence of 7 absorption bands at wave-number cm^?1 (730, 1150, 1380, 1480, 1750, 2900 and 2950) in the investigated oil. On the other hand chemical analysis of the cake showed a lower protein content and higher sugar content.     

Pt/Sn bimetallic catalysts for the electro-oxidation of methanol: poisoning by silicate and phosphate unions

The influence of silicate and phosphate anions on the performance of Pt/Sn electrodeposited catalysts for the electro-oxidation of methanol has been studied. Both anions were found to have serious poisoning effects on the catalyst, whereas platinum catalysts were unaffected. The poisoning mechanism in both cases was thought to be initiated by the formation of either stannosilicates or stannophosphates species followed by the build-up of polymeric silicate or phosphate that ultimately blocks the active sites. The origin of the poisoning mechanism in both cases was found to be chemical rather than electrochemical. In the case of silicate, the poisoning species could be removed and the catalytic activity restored by chemical treatment with sulphuric acid.     

Alternating current and direct current conductivity of poly(azo-1,4-phenylene-vinylene-1,4-phenylene)

The electrical conductivity and dielectric properties of poly(azo-1,4-phenylene-vinylene-1,4-phenylene) were examined. The thermal activation energy of the direct current (DC) conductivity was compared with the activation energy of the relaxation process, evaluated from the area and the width of the curve of the dielectric loss factor against reciprocal temperature at constant frequency. The activation energy E_a=1.50 eV of the intrinsic DC conductivity was found to be roughly equal to the dielectric activation energy [1/H]=1,62 eV. The conduction mechanism in poly(azo-1,4-phenylene-vinylene-1,4-phenylene) is discussed.     

Biomimetic Polymer Nanostructures by Injection Molding

The nanometer scale topography of self‐assembling structural protein complexes in animals is believed to induce favorable cell responses. An important example of such nanostructured biological complexes is fibrillar collagen that possesses a cross‐striation structure with a periodicity of 69 nm and a peak‐to‐valley distance of 4–6 nm. Bovine collagen type I was assembled into fibrillar structures in vitro and sedimented onto solid supports. Their structural motif was transferred into a nickel replica by physical vapor deposition of a small‐grained metal layer followed by galvanic plating. The resulting inverted nickel structure was found to faithfully present most of the micrometer and nanometer scale topography of the biological original. This nickel replica was used as a die for the injection molding of a range of different thermoplastic polymers. Total injection molding cycle times were in the range of 30–45 seconds. One of the polymer materials investigated, polyethylene, displayed poor replication of the biological nanotopographical motif. However, the majority of the polymers showed very high replication fidelity as witnessed by their ability to replicate the cross‐striation features of less than 5 nm height difference. The latter group of materials includes poly(propylene), poly(methyl methacrylate), poly(L ‐lactic acid), polycaprolactone, and a copolymer of cyclic and linear olefins (COC). This work suggests that the current limiting factor for the injection molding of nanometer scale topography in thermoplastic polymers lies with the grain size of the initial metal coating of the mold rather than the polymers themselves.

     

Micro molding for double-sided micro structuring of SU-8 resist

Advances in micro and nano fabrication technologies for MEMS require high-level measurement techniques with regard to sampling and sensitivity. For this purpose at the Institute of Microtechnology (IMT) highly sensitive piezoresistive 3D force sensors based on SU-8 polymer have been developed. In this paper we present an improved micro fabrication process for a double-sided micro structured design. The sensors are produced by multilayer processing techniques such as UV lithography and coating methods. The double-sided micro structured design demands a photoresist application method which simultaneously features a top side structuring and a casting from a mold. We use a new micro molding process to meet the demands. The micro fabrication technology is described, focusing on the development of the molding structure for shaping of the bottom side and a capable release process for the detachment of the molded structures. The fabrication process of the SU-8 mold layer is optimized to fabricate molding structures with heights from a few μm up to 350 μm. Therefore different SU-8 formulations, namely with classification numbers 5, 25, 50, and 100, have been used. The fundamental limitations for the mold design result from the lithography process, which defines the smallest lateral resolution, and from the characteristics of a molding process, e.g. the impossibility to realize an undercut. To allow for reliable release, the molding structures have to be coated with a sacrificial layer. Silicon nitride is deposited onto the substrate with accompanying monitoring of the deposition temperature during the PECVD process.     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.     

Fracture Induced in Al2O3 Bicrystals by Anisotropic Thermal Expansion

Bicrystals of Al₂O₃ were fabricated to study the effects of thermal expansion anisotropy on fracture in a model system containing one grain boundary. Fractures occurred perpendicular to the directions of maximum tensile stress in bicrystals with thermal expansion coefficient differences as low as 0.31×10⁻⁶⁰C⁻¹ and originated at the boundary, probably in areas of high residual stress associated with pores. Numerical stress analysis of two-dimensional model bicrystal configurations showed that stresses induced by thermal expansion anisotropy are maximal in a region localized along the bicrystal boundary.     

Platinum particle size effect on the oxidative dehydrogenation of aqueous ethanol

The effect of the platinum particle size was investigated for the catalytic oxidative dehydrogenation of aqueous ethanol to ethanal at a temperature of 303 K, an ethanol concentration of 260 mol m^–3, a partial oxygen pressure 60 kPa, a pH of 9, and an ethanal and ethanoate concentration of 20 mol m^–3. A particle size effect on the turnover frequency was observed but only for particle sizes smaller than 2 nm. Hence, the reaction shows a limited structure sensitivity.