GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

正交特征群

本文在证明了有限Ａｂｅ１群Ｇ与它的特征群Ｇ√存在同构的一个必要充分条件之后，构造了一类正交特征群，从而概括了相当一大类正交变换（它包括了离散付里叶变换、阿达玛变换、数论变换、Ｃｈｒｅｓｔｅｎｓｏｎ变换）这对构成有限域与整环上的正交变换具有指导作用。     

Bounding completion times of jobs with arbitrary release times,variable execution times and resource sharing

The workload of many real time systems can be characterized as a set of preemptable jobs with linear precedence constraints. Typically their execution times are only known to lie within a range of values. In addition, jobs share resources and access to the resources must be synchronized to ensure the integrity of the system. The paper is concerned with the schedulability of such jobs when scheduled on a priority driven basis. It describes three algorithms for computing upper bounds on the completion times of jobs that have arbitrary release times and priorities. The first two are simple but do not yield sufficiently tight bounds, while the last one yields the tightest bounds but has the greatest complexity     

铌酸锂γ射线辐照色心缺陷的研究

对铌酸锂晶体进行γ射线辐照处理，吸收光谱显示基础吸收边紫移，４８０ｎｍ波长附近出现一明显吸收峰，这是由空位色心Ｖ０和Ｎｂ＾４＋缺陷引起的，Ｎｂ＾４＋的存在进一步被ＥＰＲ实验所证实。本文对上述辐照缺陷的产生机理进行了讨论。     

Modulation and Equalisation Considerations for High Performance Radio LANs

The European Telecommunications Standards Institute (ETSI) has recently defined a European standard for a high performance radio LAN (known as HIPERLAN). To operate as wired LAN replacements, these systems will operate at 5.2 GHz and support instantaneous bit rates of just under 24 Mb/s. To counteract the time dispersive nature of the indoor radio channel, the use of adaptive equalisation is suggested. In this paper a number of possible modulation and equalisation techniques are presented and, in particular, the Bit Error Rate (BER) performance of quasi-coherent GMSK combined with Decision Feedback Equalisation is explored through computer simulation. The trade off between symbol spaced and fractionally spaced equalisation is considered together with the importance of feedfoward and feedback synchronisation to the channel's power delay profile. The paper also includes a comparison of the RLS and LMS based training algorithms and compares the modem developed under the ESPRIT III LAURA project with that specified in HIPERLAN.The application of dual antenna diversity is investigated and its impact on the number of received error free data packets obtained as a function of signal leval and rms delay spread. The use of such diversity is shown to greatly improve the BER performance of a HIPERLAN modem. The problem of frequency offset is considered and modifications are proposed to the HIPERLAN frame structure to improve the receiver's tolerance to such errors. Important practical issues such as frame and symbol synchronisation, frequency offset correction and hardware implementation are discussed from both the LAURA and HIPERLAN viewpoint.     

Evaluating the impact of CASE: an empirical comparison of retrospective and cross-sectional survey approaches

The purpose of this paper is to evaluate two methods of assessing the productivity and quality impact of Computer Aided Software Engineering (CASE) and Fourth Generation Language (4GL) technologies: (1) by the retrospective method; and (2) the cross-sectional method. Both methods involve the use of questionnaire surveys. Developers' perceptions depend on the context in which they are expressed and this includes expectations about the effectiveness of a given software product. Consequently, it is generally not reliable to base inferences about the relative merits of CASE and 4GLs on a cross-sectional comparison of two separate samples of users. The retrospective method that requires each respondent to directly compare different products is shown to be more reliable. However, there may be scope to employ cross-sectional comparisons of the findings from different samples where both sets of respondents use the same reference point for their judgements, and where numerical rather than verbal rating scales are used to measure perceptions.     

冶金过程中复杂夹杂物和钢液化学平衡计算

本文提出一个同温冶炼过程中预测非金属夹杂物沉淀的计算机程序。本研究中，多元硅酸盐溶体的Ｇｉｂｂｓ自由能由基于统计热力学的晶胞模型来计算，该晶胞模型按照氧与周围的阳离子构成的对称和非对称晶胞来描述硅酸盐熔体结构，假定高温冶炼时认与非金属夹杂物平衡，钢液中氧化物元素的活度由Ｗａｇｎｅｒ交互作用系数来计算，利用本程序可以估计炼钢时沉淀的非金属氧化物的成分，为调整冶炼工艺和提高产品质量提供指导，进一步可计     

小型过程控制器中编程功能的实现

根据中小规模生产设备过程控制的特点,提出了生产工艺程序在过程控制器中应具有的一般形式,并详细分析如何使小型过程控制器具有编辑这种工艺程序的功能。