Sharpness and noise characteristics of a half‐mirror stereoscopic display

Stereoscopic displays are becoming popular in entertainment and industrial applications. We characterize the spatial resolution and noise properties of a stereoscopic display with a half‐mirror and passive polarizing glasses. The upper display images reflected off the mirror have slightly degraded sharpness and reduced high spatial‐frequency noise resulting in modulation transfer functions (MTFs) of 0.59 and 0.50 at the Nyquist frequency with corresponding noise power spectra (NPS) values of 4.79 × 10^?6 and 5.17 × 10^?6 mm² at 10 mm^?1 in the horizontal and vertical directions. These results are compared to the characteristics of the individual displays with MTF values of 0.64 and 0.53 and NPS values of 6.24 × 10^?6 and 5.87 × 10^?6 mm². The polarizing glasses cause minimal reduction in sharpness and high‐frequency noise. The MTFs in the upper images observed with glasses are decreased to 0.54 and 0.47, while the NPS are decreased to 2.86 × 10^?6 and 2.01 × 10^?6 mm². When both displays are turned on and using the mirror and glasses, the observed luminance for each eye is increased from the luminance of the individual displays owing to crosstalk. We find that sharpness and noise are not affected by the interaction between the displays at the particular geometry tested in this study.     

Fault detection and isolation for uncertain closed‐loop systems based on adaptive and switching approaches

This paper deals with the fault detection and isolation (FDI) problem for uncertain closed‐loop systems with external disturbances and nonlinear perturbations. To address the system uncertainties and the nonlinear perturbations in different faulty models, adaptive and switching techniques are introduced to construct a bank of FDI observers, such that one of them can match the current system, and the corresponding observer estimate errors can converge asymptotically to zero. An effective FDI scheme is then presented by introducing some model‐matching indexes. Moreover, the introduced switching laws liberate the equality constraints often used in the existing FDI approaches, which are hard to satisfy if the system matrices include uncertainties. Finally, a simulation example of F/A‐18A automatic carrier landing system is used to illustrate the effectiveness of the proposed method. Copyright © 2015 John Wiley & Sons, Ltd.     

Leaky‐wave antenna with high gain and wide beam‐scanning angle range based on novel SIW‐CRLH transmission line

A leaky‐wave antenna (LWA) with high gain and wide beam‐scanning angle is proposed in this article using a novel substrate integrated waveguide (SIW) composite left/right‐handed transmission line (CRLH TL). The novel SIW‐CRLH TL is analyzed and the equivalent circuit model is also provided. Considering the continuous phase constant of the balanced SIW‐CRLH TL from negative to positive values, the proposed LWA can obtain a continuous beam steering property from backward to broadside to forward. For verification, a periodic LWA, which is comprised of 10 unit cells of the balanced SIW‐CRLH TL, is fabricated and measured. The measured and simulated results agree well, showing that the proposed periodic LWA operates from has continuous beam‐scanning capabilities of about 90° from backward to forward (including the broadside) with gains of better than 10 dB within the operating band. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:36–41, 2016.     

Complementary metamaterial transmission line for monoband and dual‐band bandpass filters application

A novel composite right‐/left‐handed transmission line (CRLH TL) and its equivalent circuit model are proposed based on cascaded complementary single split ring resonator (CCSSRR). It features an intrinsically balanced wider band and an additional transmission zero above the right‐handed band relative to CRLH TL using complementary single split ring resonator and complementary split ring resonators. Moreover, two single negative (SN) metamaterial (MTM) TLs constructed by using complementary electric inductive‐capacitive resonator on the conductor strip and on the ground, respectively, are researched. Both SN MTM TLs exhibit electric resonance above the fundamental magnetic resonance. For application, a monoband (MB) bandpass filter (BPF) covered WLAN band, and a dual‐band (DB) BPF covered satellite DMB band and WiMAX band are designed, fabricated, and measured. The SN MTM TLs are adopted for the sake of deep and wide out‐of‐band suppression while CRLH MTM TLs using square‐shaped and Sierpinski‐shaped CCSSRR are critical factors of the MB and DB behavior. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Broadband high‐gain slot grid array antenna for millimeter wave applications

A broadband high‐gain slot grid array antenna (SGAA) is proposed in this paper. Based on the electromagnetic complementarity principle, the metal elements in the traditional microstrip grid array antenna (GAA) are replaced by a wide slot element. Compared with the GAA, the proposed SGAA achieves broadband and high‐gain performance. In order to demonstrate this concept, a prototype with 9‐element SGAA is designed using wide slot radiation elements and fabricated on Rogers 5880 printed circuit board (PCB) substrates, which is fed by a 50 Ω coaxial probe. The measured and simulated results show a good agreement. The proposed SGAA achieves a measured peak gain of 14.8 dBi at 26.0 GHz, a 10‐dB impedance bandwidth from 22.2 to 28.5 GHz with a fractional bandwidth of 24.9%. These results indicate that the SGAA is with high performance and it is suitable for the fifth‐generation (5G) millimeter wave (mmW) wireless communication system.     

Tuning space mapping with tuning exponent of T‐matrix

Tuning space mapping (TSM) with tuning exponent parameter of T‐matrix is proposed. A section of design interest in the electromagnetic (EM) model is replaced by “n” pieces cascaded T‐matrixes, and each T‐matrix is the EM‐simulated T‐parameter of preassigned unit cell circuit (PUCC). Finally the optimal exponent parameter of T‐matrix is transferred to original design variables. The proposed TSM not only inherits the advantages of circuit tuning element‐less (CTEL) TSM in prior art but also overcome the number range limitation that the tuning parameter must be positive for tuning in CTEL TSM. The proposed method has the minimal specification error and lowest simulation time comparing with other TSM methods. Verification examples, comparisons and discussions are also implemented. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:232–239, 2016.     

Resolution enhanced light field near eye display using e‐shifting method with birefringent plate

Light field near eye displays (LFNED) can produce lightweight devices and address the accommodation–convergence conflict. However, low spatial resolution creates a poor immersive experience in LFNED. In addition, although many e‐shifting devices have been proposed to enhance resolution in projection system, yet those devices are too bulky to be applied in an LFNED to keep it lightweight. In this paper, a compact e‐shifting component is proposed to enhance image resolution in an LFNED by using a birefringent plate and twisted nematic switch cell. The proposed e‐shifting device is a flat and thin component with only 2.6 mm of thickness, which could be placed in the gap of an LFNED without increasing the thickness. The results show that the proposed components could be easily integrated in an LFNED with the result of resolution enhancement.     

Real‐time hybrid control of electrohydraulic active suspension

Electrohydraulic actuators are an attractive choice for active suspension, because these systems provide a high power‐to‐weight ratio. However, their dynamics are highly nonlinear. In addition, the use of one simple controller for both position and force is complicated, because there is a compromise between them in the case of active suspension. Most existing controllers do not efficiently fulfill the requirements, because only one state variable is considered. In this paper, we address these problems by developing a new hybrid controller for both position and force and implementing it in a real‐time test bench. Our goal is to control the vertical position of the passenger seat while tracking the force transmitted to passengers and keeping it within tolerable and comfortable limits. Therefore, the proposed controller is a combination of two controllers. Its flexible structure redirects the control signal to control the proper controlled state variable. The real‐time results of the newly designed hybrid controller are compared with those obtained using a classical proportional integral derivative controller, because this is the most widely used controller in the industry. As expected, the proposed controller demonstrates better performance in real‐time operation. Copyright © 2017 John Wiley & Sons, Ltd.     

Adaptive Bas‐relief Generation from 3D Object under Illumination

Bas‐relief is designed to provide 3D perception for the viewers under illumination. For the problem of bas‐relief generation from 3D object, most existing methods ignore the influence of illumination on bas‐relief appearance. In this paper, we propose a novel method that adaptively generate bas‐reliefs with respect to illumination conditions. Given a 3D object and its target appearance, our method finds an adaptive surface that preserves the appearance of the input. We validate our approach through a variety of applications. Experimental results indicate that the proposed approach is effective in producing bas‐reliefs with desired appearance under illumination.     

Event‐triggered control design for nonlinear systems with actuator failures and uncertain disturbances

Traditional adaptive event‐triggered design methods compensated for the event‐triggered error are not direct, and the stability analysis of resulting close‐loop systems is rather complicated. To alleviate the above restrictions, we propose a direct and simple event‐triggered co‐design method to solve the tracking control problem for parameter strict‐feedback systems with actuator faults and uncertain disturbances. By introducing a compensating terms in a smooth function form of a conventional control law and certain positive integrable functions, the effects of actuator faults and event‐triggered error can be compensated completely. Such a direct design method has the following features: (i) a direct compensation of the event‐triggered error is achieved without introducing any extra design parameters; (ii) it is not necessary to know any bound information on the parameters of event‐triggered threshold, and global asymptotic tracking control of the overall closed‐loop system is achieved; and (iii) the resulting stability criteria of the proposed event‐triggered control design are much simpler and easier to fulfill by virtue of the introduced co‐design method. Simulations are then carried out to validate the proposed schemes.