Surface Modification in Polycrystalline Y2O3 Under High‐Pressure/High‐Temperature Processing Conditions

A pressure‐induced phase transformation is used to refine the grain size of polycrystalline Y₂O₃, by a factor of 3000. A surface modification effect accompanies the observed grain refinement, which becomes more apparent with increasing holding time under high pressure. The surface‐modified layer exhibits lower hardness and lower oxygen content relative to the underlying material. Moreover, it possesses columnar‐grained structure with cubic symmetry, whereas the interior has a monoclinic structure.     

Structure and Reactivity of Spruce Mechanical Pulp Lignins Part I. Bleaching and Photoyellowing of in situ Lignins

This paper reports the structural investigation of a series of in situ spruce lignins in wood, thermomechanical pulp (TMP) and the corresponding bleached (BTMP) and photoyellowed (YBTMP) samples. This was achieved by using an original two-step degradative technique, thioacidolysis followed by Raney nickel desulfuration. The determination of thioacidolysis monomeric and dimeric products allowed an estimate of various lignin building units and interunit bonds, respectively. It was observed that the thermomechanical and bleaching treatments did not affect spruce lignin structure to an appreciable extent. On the contrary, the photoyellowing treatment caused marked structural changes in lignin, particularly when run in severe conditions. These changes were essentially a decrease in the amount of β-O-4 and β-1 interunit bonds and a relative increase in catechol units and in vanillin end-groups.     

Thioacidolysis of Lignin: Comparison with Acidolysis

Abstract

Arylglycerol-ether bonds of lignin samples or model compounds vera selectively cleaved by treatment with dioxane-ethanethiol (9/1, v/v) and 0.2 N HBF₄ etherate or 0.2 N BF₃ etherate at 100°C for four hour3. Monomers resulting from “thioacidolysis” were identified by gas chroraatography-mass spectrometry of their trimethylslly derivatives. Compared to acidolysls (dloxane-water, 0.2 N HCL, 100°C 4h), thioacidolysis yields less complex mixtures of monomers. The monomer yields for lignin thioacidolysis were also higher than for acidolysls. This increase was particularly evident for hardwood lignins.     

Spiral Wound Reverse Osmosis Modules Decomposition into Elementary Units by Analyzing Stimulus Response Experiments: Characterization of the Solute Transfer across the Membrane

A model for spiral wound reverse osmosis modules FT30‐4040 has been developed by analyzing stimulus response experiments. Perfect mixing cells represent edthe flow and dispersed plug flow represented the membrane. The model was based on phenomenological equations describing the permeation. The identification of the Peclet number and the space‐time characterizing each dispersed plug flow led to the estimation of the tracer dispersion coefficient in the membrane. Ones new and two used composite reverse osmosis modules were tested. The decrease of the rejection properties of the used membranes was linked to the apparition of new plug flows with high dispersion coefficients within the membrane.     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

New potential for preparation of performing h-BN coatings via polymer pyrolysis in RTA furnace

An innovative IR irradiation annealing process is used to increase the crystallization ratio of hexagonal boron nitride (h-BN) coatings on pure titanium pellets. Since the polymer pyrolysis route requires heating the green polymer at high temperature to convert it into a ceramic, the use of IR radiation furnace (compared to a resistive furnace) allows achievement of better crystallized h-BN while the substrate remains at relatively low temperature (<1000 °C). Annealing treatments have been performed under argon or nitrogen using either a halogen lamp or a Rapid Thermal Annealing (RTA) furnace. Advanced structural and chemical characterizations have shown a good chemical stability of the coatings. In addition, it has been revealed that samples annealed under Ar present a micro-composite structure at the interphase composed of a μ-layer of TiB₂/TiB/Ti(N)_x between the coating and the substrate, whereas samples annealed under nitrogen display a simpler structure at the interphase, with only TiN.     

Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite

The continuous use of chemical dyes in various industries, and their discharge into industrial effluents, results in severe problems to human life and water pollution. Laccases have the ability to decolorize dyes and toxic chemicals in industrial effluents as green biocatalysts. Their possible industrial applications have been limited by poor reusability, low stability, and loss of free laccase action. In this research, laccase was immobilized on zeolitic imidazolate framework coated multi-walled carbon nanotubes (Laccase@ZIF-8@MWCNTs) via metal affinity adsorption to develop an easy separable and stable enzyme. The optimum reaction conditions for immobilized laccase are at a pH of 3.0 and a temperature of 60?℃. The immobilized laccase was enhanced in storage and thermal stability. The results indicated that Laccase@ZIF-8@MWCNTs still maintained 68% of its original activity after 10 times of repeated use. Most importantly, the biocatalytic system was applied for decolorization of different dyes (20?mg·L^?1) without a mediator, and up to 97.4% for Eriochrome black T and 95.6% Acid red 88 was achieved in 25 min. Biocatalysts with these properties may be used in a variety of environmental and industrial applications.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Preparation of TiO2-pillared montmorillonite as photocatalyst Part I. Microwave calcination, characterisation, and adsorption of a textile azo dye

Two photocatalysts based on TiO₂-pillared intercalated montmorillonite have been prepared by microwave for 10 min at 700 W or by furnace heating at 673 K. Montmorillonite pillaring with TiO₂ increased the basal spacing to 14.7 Å (conventional heating) and 17.6 Å (microwave heating). XRD patterns of both materials showed the presence of 100% anatase with a slightly higher rate of crystallinity obtained through microwave calcination than by conventional heating at 673 K. The BET specific surface area of the microwave prepared photocatalyst (151 m² g^− 1) was 3 fold higher than those of the Degussa TiO₂ P25. At pH = 5.8, the maximum adsorption capacity of Solophenyl red 3BL (a textile azo dye) on the TiO₂-pillared montmorillonite calcined by microwave was 185 mg g^− 1, whereas it was 1.4 and 3 fold lower on the TiO₂-pillared montmorillonite calcined at 673 K, and on the Degussa TiO₂ P25 respectively. The influence of pH on the adsorption of the dye depended on the pH_ZPC of the pillared montmorillonites.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.