Evaluation of functional,antinutritional, pasting and microstructural properties of Millet flours

In the present study finger and pearl millet grains were milled and sieved to obtain flour. The flours were evaluated for chemical composition, nutritional, antinutritional, pasting and micro structural properties. Significant difference (p < 0.05) in nutrient and antinutrient contents was found among the millet flours. Protein, ash and fiber content of millet flours vary from 7.3 to 8.0 g/100 g, 2.73 to 5.16 g/100 g and 3.03 to 3.05 g/100 g. Results obtained for antinutrient factors in finger and pearl millet flours were (3.5 mg/g) and (2.2 mg/g) for tannic acid and (6.1 mg/g) and (9.2 mg/g) for phytic acid respectively. Mineral availability of pearl and finger millet flour (mg/100 g) was (109.2–139.2), (0.73–4.2), (1.18–8.7.0), (15.03–17.36) and (67.53–30.03) for calcium, zinc, iron, sodium and potassium respectively. Finger millet flour showed higher peak viscosity, breakdown, final and set back value compared to pearl millet flour. Findings from the scanning electron microscopy analysis showed microstructural differences in both millet flours. FTIR analysis showed that both finger and pearl millet flours possessed O–H and C–H compounds.     

Oil composition,mineral nutrient and fatty acid distribution in the lipid classes of underutilized oils of Trilepisium madagascariense and Antiaris africana from Nigeria

Trilepisium madagascariense (TM) and Antiaris africana (AA) are two underutilized plants from Nigeria. They have been subjected to standard analytical techniques in order to evaluate the proximate composition, physico-chemical properties, mineral nutrient, fatty acid composition and distribution in the lipid classes of the seeds and seed oils. The carbohydrate composition of these seeds are high; TM is 62.73 ± 0.30% and AA is 53.97 ± 0.50%. Iodine value of TM was found to be 46.10 ± 0.70 mg iodine/g while that of AA was 88.24 ± 0.50 mg iodine/g. The mineral composition of the seeds and the oils varied with K having the highest concentration in the seed and Na the highest concentration in the oils. Linoleic acid is the dominant fatty acid in the oil of AA with the highest composition in the neutral lipids while palmitic acid is the dominant fatty acid in oil of TM. Vitamin E, Gamma-Sitosterol, α and β-Amyrin, Lupeol, Stigmast-4-en-3-one, and hydrocarbons were isolated from these oils. The results of the proximate, mineral nutrient compositions, chemical characterization and fatty acid distribution of these seeds and seed oils shows their possibility as potential resources.     

Teff (Eragrostis tef) processing,utilization and future opportunities: a review

The demand for food production has been constantly increasing due to rising population. In developed countries, for example, the emergence of regional production of old grains that are rarely utilized, along with the production of commonly consumed grains, has gained importance in recent years. These grains, known collectively as ancient or heirloom grains, have offered both farmers and consumers novel ways of cultivation and products with interesting taste, characteristics and nutritional value. Among the 30 000 plant species known, only five cereals currently provide more than 50% of the world's energy intake – bread wheat (Triticum aestivum), rice (Oryza sativa), sorghum (Sorghum bicolor), millets (Panicum sp.) and maize (Zea mays). The excessive utilization of these selected species has a great potential to cause genetic losses and difficulty in bridging future agricultural demands. Teff (Eragrostis tef), an ancient grain extensively cultivated in countries like Eritrea and Ethiopia, provides promising alternatives for new food uses since its nutritional value is significantly higher than most others cereal grains. The absence of gluten allows flexibility in food utilization since it can be directly substituted to gluten-containing products. The grain also offers an excellent balance of essential amino acids and minerals, which can fulfil the recommended daily intake and eliminates the need for fortification and enrichment. This review provides a general overview of the physical properties and nutritional composition of teff grains related to processing and applications in the food and feed industries. The current status of teff utilization, as well as the challenges in production and commercialization, and future opportunities is presented and discussed.     

Viscosity variation considering cavitation in a journal bearing lubricant containing additives

The variation in viscosity with temperature is important in lubrication: this was studied by using a viscosity—film thickness relation. This is justified since it has been verified experimentally that the highest temperature occurs in zones where the film thickness is lowest. The use of additives was considered by using a micropolar fluid model. The geometry considered was that of an infinitely long journal bearing considering cavitation. There is an increase in the load capacity when additives are used. It was established theoretically that the use of additives increases the operating temperature range in bearings.     

Non-newtonian power law fluid lubrication of lightly loaded cylinders with normal and rolling motion

The lubrication of lightly loaded cylinders with rotating and normal motion was investigated using a non-newtonian power law fluid under cavitation boundary conditions. The load capacity and frictional drag increase as the squeeze velocity increases. This increase is enhanced by an increase in the flow behaviour index of the lubricant. However, when the two surfaces move apart these results are reversed. The effect of the flow behaviour index on the location of the point of cavitation does not seem to be very significant.     

Allergenic responses of red kidney bean (Phaseolus vulgaris cv chitra) polypeptides in BALB/c mice recognized by bronchial asthma and allergic rhinitis patients

Allergenicity potential of red kidney beans (Phaseolus vulgaris cv chitra) was assessed and attempts were made to identify the responsible proteins by pepsin digestibility assay and IgE immunoblotting. To evaluate allergenic potential, BALB/c mice were sensitized with red kidney bean proteins and levels of specific immunoglobulin, histamine, mast cell protease-1, cytokines and CCL-2 were measured. To confirm our findings in BALB/c, the studies were also extended to human subjects. Human sera collected from control subjects and allergic patients after skin prick test were used for IgE immunoblotting, measuring the levels of total and specific IgE and determining cross reactivity of red kidney bean with other legumes. Red kidney bean allergenic potential was evident by significant increase in specific IgE, IgG1, histamine, mast cell protease-1 and Th2 cytokine levels in comparison to control. Enhanced level of eosinophils in jejunum, prominent anaphylactic symptoms, and eruptive histopathological changes give indication towards red kidney beans allergenicity. IgE immunoblotting detected five protein components with molecular weights of approximately 170, 100, 43, 34 and 20 kDa. Red kidney bean proteins showed cross reactivity with peanut, soybean, chickpea and black gram. Finally, this work demonstrated that red kidney beans may induce allergic response in mice similar to human subjects, with identification of five clinically relevant allergenic protein components.     

Optimization of ingredients for the manufacture of soft-serve ice-cream (Softy) by response surface methodology (RSM)

Soft ice-cream samples were prepared with different proportions of cream and skimmed milk powder (SMP) and were examined for quality by physico-chemical parameters and sensory attributes. The specific proportions of cream and SMP were designed using the central composite rotatable design (CCRD). Response surface analysis indicated that sensory flavour, texture and overall acceptability (OAA) scores of soft ice-cream varied from 7.12 to 8.86, 6.66 to 8.03 and 6.90 to 8.45, respectively. The differences in the sensory scores for respective attributes were highly significant ( P ≤  0.01). The soft ice-cream containing a minimum level of 3.24% cream and 4.94% SMP resulted in a product having a minimum of 4.3% fat, 5.7% lactose and 33% total solids, with a minimum OAA score of 8. The derived mathematical second-order polynomial models against cream (X) and SMP (Y) were found to be adequate as coefficients of multiple determinants ( R ²) were more than 80% except for melting resistance.     

Effects of high pressure extraction on the extraction yield,total phenolic content and antioxidant activity of longan fruit pericarp

High pressure extraction (HPE) was carried out to extract phenolic compounds from longan fruit pericarp. The influence of different solvents, solvent concentration (25?100%, v/v), solid to liquid ratio (1:25?1:100, w/v) were individually determined using these optimum extraction conditions. HPE was carried out at various pressures (200?500 MPa), durations (2.5?30 min) and temperatures (30?70 °C). The extraction yield, total phenolic contents and scavenging activities of superoxide anion radical and 1,1-dipheny l-2-picrylhydrazyl (DPPH) radical of HPE extract were examined and then compared with those of the conventional extraction (CE). The application of HPE obtained a higher extraction yield and required a less extraction time when compared to CE. Furthermore, the total phenolic contents and the antioxidant activities of HPE extract were higher than CE extract. This study indicated that this new technology can benefit the food and pharmaceutical industries.Industrial relevanceThis study focused on the evaluations of the extraction yield, total phenolic content and antioxidant activity of longan fruit pericarp by high pressure treatment. The high pressure extraction technology provided a better way of utilizing longan fruit pericarp as a readily accessible source of natural antioxidants in food and pharmaceutical industries.     

Pervaporation of chlorinated hydrocarbon-acetone mixtures through poly(ethylene-co-vinyl acetate) membranes

Crosslinked and uncrosslinked ethylene-vinyl acetate copolymer membranes were prepared. The permeation characteristics in the pervaporation process were examined using carbon tetrachloride-acetone mixtures. Modified membranes exhibit carbon tetrachloride permselectivity, but unmodified membranes did not display the permselectivity of crosslinked polymer. Furthermore, membranes modified with dicumyl peroxide (DCP) showed a higher flux and selectivity than those of benzoyl peroxide (BP) modified ones. The effects of feed concentration, molecular size, and polarity of the permeating species on pervaporation were analyzed. The influence of crosslinking density of the membranes on pervaporation was also analyzed. The maximum separation and flux were found to be associated with an optimum amount of crosslinking agent in the membrane. A mixture of chloroform and acetone having a composition near the azeotropic region was also separated by the pervaporation technique. © 1996 John Wiley & Sons, Inc.