Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

Information Assurance Technology Forecast 2008

A virtual roundtable (featuring panelists Steven Bellovin, Terry Benzel, Bob Blakely, Dorothy Denning, Whitfield Diffie, Jeremy Epstein, and Paulo Verissimo) discussing the next 15 years in computer security.     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

Capacitive transducer for relative position error galvo mirrors

A transducer was designed to sense small angular displacements of servo-controlled galvo mirrors in rotary optical storage devices. The transducer is differential in nature, and operates on the principle of linear electrical capacitance variation with area overlap of uniquely shaped capacitor plates. These capacitive plates lie in planes normal to the axis of rotation, and consist of many electrically connected wedge-shaped projections aligned radially to the center of rotation. A prototype was fabricated and tested. For optical storage devices, experimentally determined characteristic curves show sufficient linearity and repeatability for relative position error (RPE) feedback applications, at plate spacings of 0.15 mm or less. A design change, for further extending the linear range of the characteristic curve of the transducer beyond RPE feedback requirements, is described. A circuit design to produce voltage variations proportional to differential capacitance changes in the transducer is discussed, and peak-to-peak signal-to-noise ratio is conservatively approximated at 2×10⁴ with 10 kHz bandwidth     

Sequence requirements of the Epstein-Barr virus latent origin of DNA replication

The Epstein-Barr virus (EBV) latent origin of DNA replication (oriP) is composed of two elements that contain binding sites for the sole viral gene product required for latent cycle replication, EBNA-1. One of these elements, region I, functions as an EBNA-1-dependent enhancer for RNA polymerase II-transcribed genes, may play a role in plasmid segregation, and is required for origin function in B cells latently infected with EBV. The second element, region II, contains or is very near the site of initiation of DNA replication. A genetic approach was taken to determine the contribution of the EBNA-1 binding sites in oriP to origin function. Although region I is required for the transient replication of plasmids bearing region II in EBV-infected B cells, a plasmid lacking region I but containing region II, was observed to replicate transiently in both D98/Raji and HeLa cells expressing EBNA-1. Thus, binding of EBNA-1 to region I is not absolutely required for the molecular events that lead to initiation of DNA replication at region II. Site-directed mutagenesis of the four EBNA-1-binding sites in region II, individually and in various combinations, demonstrated that only two EBNA-1-binding sites are required for region II function. The results obtained with these mutants, together with the analysis of the replicative ability of plasmids containing insertions between EBNA-1-binding sites, suggested that the spatial relationship of the two sites is critical. Mutants that contain only two EBNA-1-binding sites separated by 26 to 31 bp in region II were not maintained as plasmids over many cell generations and were greatly reduced in their ability to replicate transiently in D98/Raji cells. The EBNA-1-induced bending or untwisting of the DNA in EBNA-1-binding sites 1 and 4 in region II did not, however, demonstrate this spatial constraint. It may be concluded from these results that specific protein-protein interactions between EBNA-1 and/or between EBNA-1 and a cellular protein(s) are required for origin function.     

A technique for developing a master cast with previously made dies

This article describes a technique for preparing final working casts to be used in the laboratory phase of restorative treatment. The goal is to produce accurate working casts that have stable dies which are easily removed from the base and reliably replaced. Most casts with removable dies are made from a single master impression. However, individual dies are sometimes made previously from individual tooth (preparation) impressions. In such cases, transfer copings are required to relate the dies and produce the final working cast. Hollow plastic casting sprues are used as temporary dowels in this technique until a transfer coping pickup impression has been made. After the dies are seated and secured in the transfer coping pickup impression, the plastic casting sprues are replaced with conventional brass dowel pins. This technique ensures well-placed dowel pins that will facilitate easy and accurate withdrawal and replacement of the dies.     

Job demands and worker health: Three-dimensional reexamination of the relationship between person€nvironment fit and strain.

The most influential study of the person–environment (P–E) fit approach to stress was conducted by J. R. French et al (1982). Unfortunately, this study operationalized fit using various transformations of difference scores, thereby introducing numerous substantive and methodological problems. In the present study, the authors reanalyze data from French et al, using a procedure described by J. R. Edwards (in press) that avoids problems with difference scores and captures the underlying 3-dimensional relationship between environment, person, and strain. Results resolve ambiguities in the French et al findings and identify relationships between environment, person, and strain that, although consistent with P–E fit theory, cannot be adequately represented by fit measures such as those used by French et al. Implications for P–E fit research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)