Nickel supported on low-rank coal for steam reforming of ethyl acetate

Ethyl acetate is a volatile organic compound (VOC) that has emerged as a major environmental pollutant and also one of representative components of bio-oil. In this study, mostly metallic Ni particles (size: <10 nm) were finely dispersed on low-rank coal (LRC) by the ion-exchange process. Catalytic steam reforming of ethyl acetate (EA) was performed over Ni supported on Eco LRC (Ni/Eco) to reduce EA emissions and simultaneously produce H₂. EA reforming over 17.7 wt% Ni/Eco at 400 °C results in H₂ yield of 70%–80%; this is comparable to that achieved with reforming over commercial Ni/Al₂O₃. Advantageously, metallic Ni particles are dominant over Ni oxides on LRC, and therefore, the pre-reduction step routinely required for an alumina-supported catalyst can be skipped. Furthermore, deactivation by coking is slower with Ni/Eco than with Ni/Al₂O₃ during long-term operation, probably because of the smaller particle size and preferential adsorption on the coal support.     

Corrosion-resistant coating for cathode current collector and wet-seal area of molten carbonate fuel cells

High-temperature corrosion of metallic bipolar plates is a main problem to limit system reliability of molten carbonate fuel cells (MCFCs). In particular, cathode current collector (CCC) and wet-seal area in the bipolar plates suffer severe corrosion during MCFCs operation. Herein, we are trying to explore facile and cost-effective coating materials and methods to enhance corrosion resistance of CCC and wet-seal area of MCFCs. Cobalt (Co) layer was coated by using electrodeposition method for CCC, and aluminum (Al) layer was coated by using mechanical cladding method for wet-seal area. Co and Al layers were transformed into in-situ lithiated oxides, which are LiCoO₂ and LiAlO₂, by reacting with electrolytes without detachment. These in-situ formed oxides efficiently impede formation and growth of corrosion scales by preventing permeation of electrolytes. We believe that Co electrodeposition and Al cladding would be suitable and practical methods for making protective layers to enhance corrosion resistance of CCC and wet-seal area in the MCFCs bipolar plates.     

Hydrogen production by steam methane reforming in a membrane reactor equipped with a Pd composite membrane deposited on a porous stainless steel

With the aim of producing hydrogen at low cost and with a high conversion efficiency, steam methane reforming (SMR) was carried out under moderate operating conditions in a Pd-based composite membrane reactor packed with a commercial Ru/Al₂O₃ catalyst. A Pd-based composite membrane with a thickness of 4–5 μm was prepared on a tubular stainless steel support (diameter of 12.7 mm, length of 450 mm) using electroless plating (ELP). The Pd-based composite membrane had a hydrogen permeance of 2.4 × 10^?3 mol m^?1 s^?1 Pa^?0.5 and an H₂/N₂ selectivity of 618 at a temperature of 823 K and a pressure difference of 10.1 kPa. The SMR test was conducted at 823 K with a steam-to-carbon ratio of 3.0 and gas hourly space velocity of 1000 h^?1; increasing the pressure difference resulted in enhanced methane conversion, which reached 82% at a pressure difference of 912 kPa. To propose a guideline for membrane design, a process simulation was conducted for conversion enhancement as a function of pressure difference using Aspen HYSYS^®. A stability test for SMR was conducted for ～120 h; the methane conversion, hydrogen production rate, and gas composition were monitored. During the SMR test, the carbon monoxide concentration in the total reformed stream was <1%, indicating that a series of water gas shift reactors was not needed in our membrane reactor system.     

Combined Drying of Apple Cubes by Using of Heat Pump,Vacuum-Microwave,and Intermittent Techniques

Apple cubes of 15 mm were dried naturally without adding any chemical preservative using various drying methods namely intermittent hot air–dehumidified air drying with cyclic temperature profile and step-up temperature profile, heat-pump-assisted (HP) drying, convective vacuum-microwave (C/VM) drying, and heat pump vacuum-microwave (HP/VM) drying. The drying kinetics of apple samples dehydrated by different methods was divided into characteristic drying periods and fitted with empirical models, which gave high value of determination coefficient. The application of C/VM in drying of fruits gave the shortest drying time compared to other drying methods (about 50 % of the total drying time). The drying time was affected by effective diffusivity ranging from 3.522?×?10^?8 to 1.431?×?10^?6 m²/min depending on the drying technique used. It was found that combined drying which apply vacuum microwave (C/VM, HP/VM) gave the lowest values in hardness and chewiness. In addition, HP/VM drying gave the highest retained total polyphenol content, antioxidant activity, and the best appearance quality.     

Effects of roasting conditions on physicochemical properties and antioxidant activities in <Emphasis Type="Italic">Ginkgo biloba</Emphasis> seeds

The roasting treatment has been used to extend the shelf life of food and improves its quality, and eliminate or reduce toxic. In this study, we investigate the changes in the physicochemical properties and antioxidant activities of Ginkgo biloba seeds (GBS) according to the roasting temperature and duration. As the roasting temperature and duration increased, the pH (from 7.32 to 6.31) and total cyanide content (from 1.49 to 0.70 µg/g) decreased, whereas the titratable acidity (from 0.39 to 0.84%) increased. The antioxidant activities increased rapidly at 210 °C according to the increase in the roasting temperature and duration. The 4′-O-methylpyridoxine (MPN) content in the 210 °C heat treatment group decreased by more than 70% compared to the MPN content in the control group. These results suggest that heat-treated GBS could be used in food materials and medicines for decreasing cyanide and MPN contents as well as for increasing antioxidant compound contents.     

Anti-inflammatory and in vitro bone formation effects of Garcinia mangostana L. and propolis extracts

Food Science and Biotechnology - The purpose of this study was to determine the anti-inflammatory and in vitro bone formation effects of Garcinia mangostana L. (mangosteen) and propolis extracts....     

Products and mechanism of secondary organic aerosol formation from reactions of n-alkanes with OH radicals in the presence of NOx

Secondary organic aerosol (SOA) formation from reactions of n-alkanes with OH radicals in the presence of NOx was investigated in an environmental chamber using a thermal desorption particle beam mass spectrometer for particle analysis. SOA consisted of both first- and higher-generation products, all of which were nitrates. Major first-generation products were sigma-hydroxynitrates, while higher-generation products consisted of dinitrates, hydroxydinitrates, and substituted tetrahydrofurans containing nitrooxy, hydroxyl, and carbonyl groups. The substituted tetrahydrofurans are formed by a series of reactions in which sigma-hydroxycarbonyls isomerize to cyclic hemiacetals, which then dehydrate to form substituted dihydrofurans (unsaturated compounds) that quickly react with OH radicals to form lower volatility products. SOA yields ranged from approximately 0.5% for C8 to approximately 53% for C15, with a sharp increase from approximately 8% for C11 to approximately 50% for C13. This was probably due to an increase in the contribution of first-generation products, as well as other factors. For example, SOA formed from the C10 reaction contained no first-generation products, while for the C15 reaction SOA was approximately 40% first-generation and approximately 60% higher-generation products, respectively. First-generation sigma-hydroxycarbonyls are especially important in SOA formation, since their subsequent reactions can rapidly form low volatility compounds. In the atmosphere, substituted dihydrofurans created from sigma-hydroxycarbonyls will primarily react with O3 or NO3 radicals, thereby opening reaction pathways not normally accessible to saturated compounds.     

Comparison of four molecular typing methods for the differentiation of Salmonella spp

A total of 57 strains of Salmonella spp. were differentiated by random amplification of polymorphic DNA (RAPD) fingerprinting using three different primers (OPL-03, primer 1, and primer A); by Enterobacterial Repetitive Intergenic Consensus (ERIC) fingerprinting; by ribotyping-PCR; and by Single Strand Conformation Polymorphism (SSCP). From the 57 strains, RAPD fingerprinting with primers OPL-03, 1, and A produced 42, 51, and 54 fingerprint patterns respectively. ERIC fingerprinting produced 50 patterns; ribotyping-PCR produced four patterns, and SSCP produced 11 patterns. Combinations of two different typing methods generally increased the discrimination of Salmonella strains. A combination of two different RAPDs or a combination of RAPD and ERIC was better than the other combinations. Discrimination using a combination of RAPD (primer 1 or primer A) and ERIC, which could differentiate all 57 Salmonella strains, was better than the combination of two RAPDs. This study indicated that the use of a combination of RAPD (primer 1 or primer A) and ERIC should be useful for the differentiation of field-isolated Salmonella strains and epidemiological studies.