The disproportionation ofn-butane (and of isobutane) was catalyzed by sulfated zirconium oxide containing 1.5 wt% Fe, 0.5 wt% Mn, and 4.0 wt% sulfate at 2.0 atm and temperatures in the range of 30–60C. The reaction accompanies isomerization, which under some conditions is as much as one or two orders of magnitude faster than disproportionation. The conversion to each of the products increased with time on stream in a flow reactor, and then declined. The time on stream for maximum conversion was the same for each product. The results suggest that the disproportionation and isomerization reactions proceed through a common C8 intermediate. Rates of the disproportionation reaction were determined at the time on stream corresponding to the maximum conversion at each temperature; for example, the rate of conversion ofn-butane into isopentane at 60C with ann-butane partial pressure of 0.58 atm was about 1×10–7 mol/(g of catalyst s). 相似文献
This paper examines the effect of reference prices on companies operating within competitive industries. We confirm that even with competition, firms optimally price high in the short term to generate a high reference price and then decrease this price over time. Competitors' prices converge toward each other over time, emphasizing the short‐term nature of reference prices. We then show that pricing optimally to take advantage of reference prices generates a positive externality for other firms in an industry, such that competitors may generate higher profit. The longer the focus of a given firm, the more profit the firm generates, but less relative to its competitors. This arises because the externalities created through pricing high to increase reference prices outweigh the benefits of the higher reference prices themselves. If pricing managers are compensated relative to their competition, this suggests that short‐termism may be implicitly encouraged to the detriment of profit. 相似文献
Performance data are presented for methane oxidation on alumina-supported Pd, Pt, and Rh catalysts under both fuel-rich and fuel-lean conditions. Catalyst activity was measured in a micro-scale isothermal reactor at temperatures between 300 and 800 °C. Non-isothermal (near adiabatic) temperature and reaction data were obtained in a full-length (non-differential) sub-scale reactor operating at high pressure (0.9 MPa) and constant inlet temperature, simulating actual reactor operation in catalytic combustion applications.
Under fuel-lean conditions, Pd catalyst was the most active, although deactivation occurred above 650 °C, with reactivation upon cooling. Rh catalyst also deactivated above 750 °C, but did not reactivate. Pt catalyst was active above 600 °C. Fuel-lean reaction products were CO2 and H2O for all three catalysts.
The same catalysts tested under fuel-rich conditions demonstrated much higher activity. In addition, a ‘lightoff’ temperature was found (between 450 and 600 °C), where a stepwise increase in reaction rate was observed. Following ‘lightoff’ partial oxidation products (CO, H2) appeared in the mixture, and their concentration increased with increasing temperature. All three catalysts exhibited this behavior.
High-pressure (0.9 MPa) sub-scale reactor and combustor data are shown, demonstrating the benefits of fuel-rich operation over the catalyst for ultra-low emissions combustion. 相似文献
Population balance models have been used in chemical engineering since the 1960s and have evolved to become the most important tools for design and control of particulate processes. In this paper we show that the intrinsic particle parameter that determines changes in the process and should thus be included in the population balance is the particle volume. The basic population that is modeled should be the mass distribution, or the volume distribution if the density is constant. The population balance thus describes the change of the volume distribution of volume with time. Furthermore, we suggest that the “birth” and “death” terms that are often used to describe discrete events in particulate processes can almost always be replaced by a rate of change term.To design and control existing and future processes, a multi-dimensional population balance model is required. We propose a volume-based model in which the particle properties that are modeled are the volumes of solid, liquid, and air, respectively. In the most general case the model will consist of a properties vector and a distribution tensor. Depending on the complexity of the process, one or more of the properties may be omitted from the model. This is shown in three examples of increasing complexity: comminution, sintering, and granulation. 相似文献
Criteria for authentic olive oils were developed from isocratic high-performance liquid chromatography analyses of 99 olive
oils from the major Mediterranean producers in the 1983–1986 crop years. Authentic olive oils include extra virgin, virgin
and pure or refined oils, but exclude all reesterified and adulterated oils. The extra virgin through pure grades will have
a combined area for the LOO (C18:2C18:1C18:1), LOP (C18:2C18:1C16:0), OOO (C18:1C18:1C18:1), POO (C16:0C18:1C18:1), POP (C16:0C18:1C18:1), and SOO (C18:0C18:1C18:1) peaks between 82.0 and 92.6% of the total area (L, linoleic; O, oleic; P, palmitic; S, stearic). Authentic oils will have
ratios of LOO/LOP and OOO/POO that coincide with a line defined by OOO/POO=0.7844(LOO/LOP)+0.0968; correlation coefficient
is 0.885. Authentic oils will not have a trilinolein (LLL) peak over 0.5% in area. Neither triolein (OOO) nor any other single
peak suffices to characterize an olive oil sample as one of the authentic grades. 相似文献
The surface and mechanical properties of copolymers of hydroxyalkyl acrylates and methacrylates have been examined by a variety of techniques. This work is complementary to earlier parts of this series which describe the effect of copolymer structure on water binding properties. Water structure has been demonstrated to exert a profound effect upon mechanical properties whether measured in compression or in tension. In particular, water that is characterized by differential scanning calorimetry as ‘freezing’ water is observed to have a marked plasticizing effect upon the gel, whereas ‘non-freezing’ water has little such effect. Similarly, the ‘freezing’ water produces a more marked effect on thermally induced transitions. Two distinct transition points are observed as a result of its presence. One corresponds to the freezing point of water and the other to a glass transition temperature, whose value depends upon the proportion of ‘freezing’ or ‘plasticizing’ water in the gel. Several predictive and direct measurement techniques have been used to study the surface properties of the copolymers in both hydrated and dehydrated states. Taken together they have established a sound understanding of the way in which polar and dispersive components of surface free energy vary as a function of copolymer composition and water content. Use of protein adsorption and fibroblast cell interaction techniques demonstrate that biological phenomena respond to changes at a molecular level which current macroscopic surface energy techniques are unable to discern. 相似文献
A method has been developed on the Rheometrics mechanical spectrometer using the eccentric rotating disks mode to study the crystallization kinetics of different semi-crystalline polymers (polyethylene, polypropylene, poly(butylene terephthalate) and Nylon 11) under oscillatory shear. Dynamic shear moduli (storage G′ and loss G″), loss tangent (tan δ), and dynamic viscosity (η′) were simultaneously, monitored during the crystallization process. The onset and completion of crystallization were characterized by the initial rise and final levelling off of G′, while the peak time, of crystallization (tp) is calculated from the time elapsed between the onset and peak of crystallization which is indicated by the G″ or η′ maximum. In the case of polypropylene, going from a low frequency of ?0.1 rad/s, to higher frequencies of up to 10 rad/s, there is a monotonic decrease in peak time of crystallization (tp) together with a progressive decrease in spherulitic morphology. The observed acceleration in crystallization is due predominantly to the increase in nucleation rate and orientation of chains in melt crystalline aggregate. The progressive disappearance of the spherulitic morphology is attributed to the disruption of the spherulite superstructure at higher frequencies of shear. 相似文献
Residual strains responsible for crack tip shielding have been measured within transformation zones surrounding cracks in Mg-PSZ. Two techniques were used for strain measurement: moiré interferometry and high-resolution image matching. Both methods provide maps of differential in-plane displacements within the specimen surface intersected by the crack, the latter method with the higher resolution. The results are compared with finite-element analysis to assess surface relaxation effects, and the measured strains are used to evaluate the crack tip shielding stress intensity factor. Calculations based on the assumption that the unconstrained transformation strain is hydrostatic dilatation yielded results that were significantly smaller than the measured toughness increases. 相似文献
Three-dimensionally ordered silica structures containing both mesopores and macropores are created using polystyrene coacervate spheres with a diameter of ca. 146 nm. The close-packed polystyrene coacervate spheres are intercalated with tetraethyl orthosilicate. The spheres are removed by calcination leaving an inverse silica replica with a spherical macropore cavity diameter of 110 nm. Due to the nature of these porous structures, pores leading into the macropore cavity are in the mesopore regime, 40 nm in diameter. The nitrogen adsorption data described in the following paper gives a pore size for both the macropore cavity and the mesopore openings leading into the cavity. The pore sizes as determined by nitrogen sorption are in good agreement with the pore sizes observed by scanning electron microscopy. Mercury intrusion porosimetry results confirm the size of the mesopore openings leading into the macropore cavity, however due to destruction of the sample upon intrusion, extrusion results can not be obtained to determine main cavity diameters. As a result, nitrogen sorption may be a viable option for determining pore sizes with these three-dimensionally ordered materials containing both mesopores and macropores. 相似文献