Sensitivity analysis for the SimpleTreat model to simulate fate of chemicals in sewage treatment plants

SimpleTreat 3.1 predicts the distribution and elimination of chemicals by sewage treatment. The model is used as the default calculation in EUSES 2.0 to estimate exposure concentration in the receiving water, soil and air. A sensitivity analysis was performed to rank input parameters according to their influence on model predictions. Triclosan was selected for the base case. The sewage flow, degradation rates and parameters describing the raw sewage were shown to be the most sensitive inputs. The pH and dissociation constant are very sensitive parameters when working with ionisable compounds. Variation in certain input parameters was propagated through the model to yield greater variation in output parameters with a maximum ratio of 4.0. SimpleTreat 3.1 is a steady state model describing a highly non-steady system. A large variability in the most sensitive parameters is expected within a single sewage plant and parameters should therefore be selected to cover this variability.     

Learning market prices in real-time supply chain management

This paper proposes a model for dynamic pricing that combines knowledge of production capacity and existing commitments, reasoning about uncertainty and learning of market conditions in an attempt to optimise expected profits. In particular, the market conditions are represented as a set of probabilities over the success rate of product prices, and those prices are learned online as the market develops. The dynamic pricing model is integrated into a real-time supply chain management agent using the Trading Agent Competition Supply Chain Management game as a test framework. We evaluate the agent experimentally in competition with other supply chain agents, and demonstrate the benefits of incorporating more market data into the dynamic pricing mechanism.     

Postural support strategies of disabled drivers and the effectiveness of postural support aids

The paper discusses a series of driving trials that were conducted to investigate postural stability of disabled drivers and to assess the effectiveness of a representative sample of support aids. Twenty-three disabled drivers with varying levels of physical disability and seven non disabled drivers participated in the study. The test car was equipped with transducers to measure vehicle velocity and acceleration (longitudinal and lateral), steering wheel movement and torque, and the bracing forces exerted by the driver on the steering wheel. Video cameras were installed to record postural support strategies and displacement of the driver and to record deviation of the car from the specified path. Subjective data regarding driver attitudes and acceptance were also collected through the administration of questionnaires. Findings from the study showed that support aids significantly improved driving performance and reduced physical exertion to maintain an upright driving position for disabled drivers. However, ergonomics design aspects regarding the ease of use and acceptance of the support aids by the end users were identified as obstacles to their sustained use in everyday driving.     

Physicochemical properties of calcific deposits isolated from porcine bioprosthetic heart valves removed from patients following 2-13 years function

The purpose of this study was to characterize the physicochemical properties of calcific deposits that cause the failure of tissue-derived heart valve bioprostheses. This was done in an effort to understand the mechanism of pathologic biomineralization in the cardiovascular system and potentially prevent deterioration of bioprostheses. Calcific deposits taken from 10 failed bioprosthetic valves that had been implanted in patients for 2-13 years were characterized by chemical analysis, x-ray diffraction, FTIR spectroscopy, scanning electron microscopy, polarized light microscopy, and solubility measurements. The combined results identified the biomineral as an apatitic calcium phosphate salt with substantial incorporation of sodium, magnesium and carbonate. The average Ca/PO4 ratio for this "young" pathologic biomineral was approximately 1.3, considerably lower than approximately 1.7 found in mature atherosclerotic plaque biomineral and mature skeletal biomineral, both of which approximate hydroxyapatite in composition. Deproteinated calcific deposits from bioprostheses had thermodynamic solubilities comparable to those of both atherosclerotic plaque, typical pathologic biomineral and hydrolyzed octacalcium phosphate (OCP, Ca4H(PO4)3 x 2.5 H2O), a proposed precursor phase to biomineral apatite. This later finding, together with chemical composition and structural details of the bioprosthetic deposits themselves, supports a mechanism of cardiovascular calcification in which OCP plays a crucial role in the formation of the final apatitic phase. This suggests an approach toward prevention of bioprosthetic tissue calcification through control of the formation of the kinetically favored OCP precursor and/or its transformation into bioapatite.     

Technology transfer in digital mammography. Report of the Joint National Cancer Institute-National Aeronautics and Space Administration workshop of May 19-20, 1993

Digital mammography is one of the most promising novel technologies for further improvement of early detection of breast cancer, offering important potential advantages: 1) improved image quality; 2) digital image processing for improved lesion contrast; 3) computer-aided diagnosis for enhanced radiologic interpretation; and 4) teleradiology for facilitated radiologic consultation. The Diagnostic Imaging Research Branch of the National Cancer Institute (NCI) recently funded an international, multidisciplinary, multi-institutional Digital Mammography Development Group for collaborations between NCI, the academic community, and industry to facilitate the integrated development and implementation of digital mammographic systems. Currently, however, digital mammography faces a number of fundamental technological roadblocks: 1) cost-effective digital detectors and displays for imaging systems; 2) the need for novel algorithms for image processing and computer-aided diagnosis; and 3) high performance, low cost digital networks to provide an "information superhighway" for teleradiology. To solve some of these technological problems, the Diagnostic Imaging Research Branch of NCI joined efforts with the Technology Transfer Division of the National Aeronautics and Space Administration to pursue a federal technology transfer program in digital mammography. The authors discuss the findings and recommendations of the workshop entitled "Technology Transfer in Digital Mammography," which was organized and held jointly by the NCI and the National Aeronautics and Space Administration in May, 1993. Numerous innovative technologies of varying degree of promise for digital mammography were presented at the conference. In this article, specific technologies presented at the workshop by the federal and federally-supported laboratories are described, and critiques of these technologies by the leaders of the medical imaging community are presented.     

Severity of delayed (“secondary”) cerebral energy failure after acute hypoxia-ischemia is related to the time integral of acute ATP depletion

The aim of this study was to reproduce the delayed (secondary) cerebral energy failure previously described in birth-asphyxiated newborn infants and to investigate relationships between primary insult severity and the extent of the delayed energy failure. Phosphorus (³¹P) magnetic resonance spectroscopy (MRS) at 7 T was used to study the brains of 12 newborn piglets during an acute, reversible, cerebral hypoxic-ischemic episode which continued until nucleotide triphosphates (NTP) were depleted. After reperfusion and reoxygenation, spectroscopy was continued for 48 h. High-energy metabolite concentrations returned to near normal levels after the insult, but later they fell as delayed energy failure developed. The time integral of NTP depletion in the primary insult correlated strongly with the minimum [phosphocreatine (PCr)]/[inorganic orthophosphate (P_i)] observed 24–48 h after the insult. (Linear regression analysis gave slope –8.04 h^–1; ordinate intercept=1.23;r=0.92;P<0.0001.) This model is currently being used to investigate the therapeutic potential of various cerebroprotective strategies including hypothermia.     

Relationships between subjective and objective assessments of stress at slaughter and meat quality in pigs

A study was carried out to relate subjective and objective measures of stress at slaughter and meat quality in pigs. Thirteen slaughter plants were visited. The systems used for handling the pigs pre-slaughter and the levels of stress experienced by the animals were subjectively assessed. The sound level immediately before stunning was also measured. Generally, systems that were rated as being most stressful also produced higher levels of sound, probably because of the vocalisations of the pigs. As the size of plant increased, there was a tendency for the level of stress, and the recorded sound level, to increase. This appeared to be because larger plants operated faster and were more likely to use restraining conveyors supplied by races to handle the animals before stunning. The restraint associated with these seems stressful to pigs. Five plants were selected for further study. Two had been assessed as having handling systems that produced a low level of stress in the pigs, one as having a system producing a medium level, and two as having poor systems producing high levels of stress. Blood samples were collected at exsanguination, and meat quality was assessed. As the level of subjectively assessed stress experienced by the pigs increased, so did the average blood levels of lactate and creatine phosphokinase (CPK). There was also a progressive increase in the potential incidence of pale, soft, exudative (PSE) and dark, firm, dry (DFD) meat in the plants using more stressful handling systems. Additionally, there were positive relationships between sound level and lactate and CPK, and sound level and indices of poorer meat quality. Cortisol concentrations were not different in pigs killed in the different systems and probably reflect events earlier in the handling process, such as in transport and lairage, rather than the stress experienced immediately before stunning. The overall conclusion was that subjective assessments of the stress suffered by pigs correlate well with objective measures and that higher stress levels are associated with poorer meat quality.     

Glyphosate Adsorption from Water Using Hierarchically Porous Metal–Organic Frameworks

The selective removal of one ligand in mixed-ligand MOFs upon thermolysis provides a powerful strategy to introduce additional mesopores without affecting the overall MOF structure. By varying the initial ligand ratio, MOFs of the MIL-125-Ti family with two distinct hierarchical pore architectures are synthesized, resembling either large cavities or branching fractures. The performance of the resulting hierarchically porous MOFs is evaluated toward the adsorptive removal of glyphosate (N-(phosphonomethyl)glycine) from water, and the adsorption kinetics and mechanism are examined. Due to their strong affinity for phosphoric groups, the numerous Ti–OH groups resulting from the selective ligand removal act as natural anchor points for effective glyphosate uptake. The relationships between contact duration, glyphosate concentration, and adsorbent dosage are investigated, and the impact of these parameters on the effectiveness of glyphosate removal from contaminated water samples is examined. The introduction of additional mesopores has increased the adsorption capacities by nearly 3 times with record values exceeding 440.9 mg g⁻¹, which ranks these MOFs among the best-reported adsorbents.