Crack closure in fibre metal laminates

GLARE is a fibre metal laminate (FML) built up of alternating layers of S2-glass/FM94 prepreg and aluminium 2024-T3. The excellent fatigue behaviour of GLARE can be described with a recently published analytical prediction model. This model is based on linear elastic fracture mechanics and the assumption that a similar stress state in the aluminium layers of GLARE and monolithic aluminium result in the same crack growth behaviour. It therefore describes the crack growth with an effective stress intensity factor (SIF) range at the crack tip in the aluminium layers, including the effect of internal residual stress as result of curing and the stiffness differences between the individual layers. In that model, an empirical relation is used to calculate the effective SIF range, which had been determined without sufficiently investigating the effect of crack closure. This paper presents the research performed on crack closure in GLARE. It is assumed that crack closure in FMLs is determined by the actual stress cycles in the metal layers and that it can be described with the available relations for monolithic aluminium published in the literature. Fatigue crack growth experiments have been performed on GLARE specimens in which crack growth rates and crack opening stresses have been recorded. The prediction model incorporating the crack closure relation for aluminium 2024-T3 obtained from the literature has been validated with the test results. It is concluded that crack growth in GLARE can be correlated with the effective SIF range at the crack tip in the aluminium layers, if it is determined with the crack closure relation for aluminium 2024-T3 based on actual stresses in the aluminium layers.     

Cascade damage evolution: rate theory versus kinetic Monte Carlo simulations

The thermal evolution of defects produced by ion irradiation is studied by kinetic Monte Carlo and Rate Theory approaches. An isochronal annealing is simulated to evidence the different thermally activated mechanisms that govern defect evolution. KMC simulations show that in the case of ion irradiation, additional recovery peaks should be expected, in comparison to electron irradiation conditions. A comparison between kMC and RT results indicates that some of these peaks are due to spatially – correlated recombinations that occur at low temperature. Therefore kMC and RT approaches differ at low temperature. However, at higher temperature results obtained by both models are in near perfect agreement. In addition, we studied the influence of vacancy cluster mobility on the evolution of damage. KMC simulations show that the mobility of V₂, V₃ and V₄ clusters does not significantly affect the evolution of defects and can be neglected in these conditions.     

Schwingfestigkeit von Schraube‐Mutter‐Verbindungen

High cycle fatigue of bolted connections Extensive tests regarding the influences on the fatigue of bolt‐nut‐connections of preloading with torsion, of preloading with yielding, of loading with superimposed bending and of the tested lot are processed. These influences are not yet known according to VDI 2230. New testing devices were designed for these tests, which allow a far less expensive operation and may easily be used for bolts of diameters up to M100 and testing frequencies up to 1000 Hz. The validity of fatigue resistance according to VDI 2230 is specified with respect to the test results. The determined influence of the tested lots is unexpectedly high. The manufacturing process of bolts should be improved to minimize this influence.     

Contracting, prompting, and reinforcing substance use disorder continuing care: A randomized clinical trial.

Although continuing care is strongly related to positive treatment outcomes for substance use disorder (SUD), participation rates are low and few effective interventions are available. In a randomized clinical trial with 150 participants (97% men), 75 graduates of a residential Veterans Affairs Medical Center SUD program who received an aftercare contract, attendance prompts, and reinforcers (CPR) were compared to 75 graduates who received standard treatment (STX). Among CPR participants, 55% completed at least 3 months of aftercare, compared to 36% in STX. Similarly, CPR participants remained in treatment longer than those in STX (5.5 vs. 4.4 months). Additionally, CPR participants were more likely to be abstinent compared to STX (57% vs. 37%) after 1 year. The CPR intervention offers a practical means to improve adherence among individuals in SUD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Is evidence-based practice diverse enough? Philosophy of science considerations.

In its policy rationale for evidence-based practice in psychology (EBPP), the APA Presidential Task Force on Evidence-Based Practice (see record 2006-05893-001) claims to have constituted itself with "scientists and practitioners from a wide range of perspectives and traditions, reflecting the diverse perspectives within the field" (p. 273). We applaud this attention to diversity but contend that an entire perspective of the debate was omitted in the Task Force's newly approved policy and its underlying report. The failure to consider a philosophy of science perspective led the Task Force to make a number of epistemological assumptions that are not based on evidence or rationale and that thus violate the very spirit of evidence-based decision making. In this comment, we reveal a few of these assumptions and discuss their detrimental consequences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Douglas W. Bray (1918-2006).

Presents an obituary for Douglas W. Bray, the inventor of the modern-day assessment center, a method used by thousands of organizations around the world to identify the best people for critical roles and to guide individuals in optimizing their talents. Bray's death in Englewood, New Jersey, on May 9, 2006, ended the extraordinary career of a pioneer in industrial/organizational (I/O) psychology who optimized the interplay of research and application. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Israeli-Palestinian peace process and its vicissitudes: Insights from attitude theory.

The vicissitudes of the Israeli-Palestinian peace process since 1967 are analyzed using attitudes and related concepts where relevant. The 1967 war returned the two peoples' zero-sum conflict around national identity to its origin as a conflict within the land both peoples claim. Gradually, new attitudes evolved regarding the necessity and possibility of negotiations toward a two-state solution based on mutual recognition, which became the building stones of the 1993 Oslo agreement. Lacking a commitment to a final outcome, the Oslo-based peace process was hampered by reserve options, which increased avoidance at the expense of approach tendencies as the parties moved toward a final agreement. The resulting breakdown of the process in 2000 produced clashing narratives, reflecting different anchors for judgment and classical mirror images. Public support for violence increased, even as public opinion continued to favor a negotiated two-state solution. Reviving the peace process requires mutual reassurance about the availability of a partner for negotiating a principled peace based on a historic compromise that meets the basic needs and validates the identities of both peoples. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bioavailability and Toxicity of Metal Nutrients during Anaerobic Digestion

This paper investigates the effect of chelating agents on the bioavailability of Fe and Cu during anaerobic digestion. The results on metal speciation and methane production in anaerobic serum bottles showed that biomass was able to grow in the presence of citrate 1?mM and nitrilotriacetic acid (NTA) 1?mM, suggesting that the binding sites at the cell surface competed efficiently for the metals with the chelating agents added. The presence of free ethylenediaminetetraacetic acid 1?mM inhibited methanogenesis, and this seemed to be related to a loss in metal uptake capacity. Although the addition of soluble microbial products (SMP) did not change metal distribution in anaerobic systems, it caused an increase in the rate of methane production, and it is believed that direct uptake of Cu-SMP complexes was responsible for this increase. The best protection against Cu toxicity occurred when stoichiometric amounts of NTA, which should complex and solubilize most of the Cu, was added, and it is likely that NTA prevented lethal concentrations of Cu from being adsorbed onto the cell and hence internalized.     

Bench-Scale Testing of Nanofiltration for Seawater Desalination

A dual-staged nanofiltration process is being evaluated as an alternative to reverse osmosis for seawater desalination. The primary goal of this system is to reduce energy consumption while producing potable water at an acceptable recovery rate. Investigation of this system at the bench-scale level focused on membrane surface characterization, ion rejection (including boron, bromide, and iodide rejection), and flux decline. Results from this study showed that two commercially available nanofiltration membranes can effectively desalinate seawater. Although fouling was apparent—and resulted in approximately 20% flux decline over 3 days—a critical flux was not identifiable. Operation of the system at different cross-flow velocities revealed the significance of hydrodynamic conditions on the polarization modulus, and hence on membrane performance.     

Structural Response of Nuclear Containment Shield Buildings with Construction Openings

Steam generator replacement at nuclear power plants requires large construction openings in nuclear containment structures. This study examines the effects of such openings placed in a 61?cm (2?ft) thick dome of a shield building. The dome is cast in two layers, and the limiting cases of the two layers acting as one and the lower layer carrying the entire load are considered. Without openings, the stresses due to dead load in the structure are very low when compared to the material strength. With openings, the loads are easily redistributed around the opening, and the maximum stresses for the conservative case are between three and four and one-half times larger than in the original structure with no openings. The extent of the affected area around the holes is relatively small. Smooth corners in the openings are necessary to avoid high local stress concentrations.