Influence of Silicification on the Structural and Biological Properties of Buffer‐Mediated Collagen Hydrogels

A buffer‐mediated gelation route for collagen hydrogels that allows the formation of homogeneous composite and hybrid materials with various silica sources (i.e., colloidal silica and soluble silicates) at high concentration (up to 25 × 10^?3 M ) is described. Most significant improvement in rheological properties and proliferation of primary adult human dermal fibroblasts was obtained for the silicate‐based hybrid materials. A similar trend was observed in composite materials incorporating 14 nm SiO₂ nanoparticles, although to a much lesser extent, whereas larger colloids (80 and 390 nm) did not significantly impact mechanical stability and cell behavior. Modification of 80 nm particles surface with amine groups weakens the collagen‐mineral interface, resulting in the decrease of material stability and leading to particle aggregation during the course of cell proliferation experiments.     

The importance of cellular internalization of antibody-targeted carbon nanotubes in the photothermal ablation of breast cancer cells

Single-walled carbon nanotubes (CNTs) convert absorbed near infrared (NIR) light into heat. The use of CNTs in the NIR-mediated photothermal ablation of tumor cells is attractive because the penetration of NIR light through normal tissues is optimal and the side effects are minimal. Targeted thermal ablation with minimal collateral damage can be achieved by using CNTs attached to tumor-specific monoclonal antibodies (MAbs). However, the role that the cellular internalization of CNTs plays in the subsequent sensitivity of the target cells to NIR-mediated photothermal ablation remains undefined. To address this issue, we used CNTs covalently coupled to an anti-Her2 or a control MAb and tested their ability to bind, internalize, and photothermally ablate Her2(+) but not Her2(-) breast cancer cell lines. Using flow cytometry, immunofluorescence, and confocal Raman microscopy, we observed the gradual time-dependent receptor-mediated endocytosis of anti-Her2-CNTs whereas a control MAb-CNT conjugate did not bind to the cells. Most importantly, the Her2(+) cells that internalized the MAb-CNTs were more sensitive to NIR-mediated photothermal damage than cells that could bind to, but not internalize the MAb-CNTs. These results suggest that both the targeting and internalization of MAb-CNTs might result in the most effective thermal ablation of tumor cells following their exposure to NIR light.     

Cancer stem cell sorting from colorectal cancer cell lines by sedimentation field flow fractionation

Recently, cancer stem cells (CSCs) have been identified in many types of cancers, such as colorectal cancer (CRC). CSCs seem to be involved in initiation, growth, and tumor metastasis, as well as in radio- and chemotherapy failures. CSCs appears as new biological targets for cancer therapy, requiring the development of noninvasive cell sorting methods. In this study, we used sedimentation field flow fractionation (SdFFF) to prepare enriched populations of CSCs from eight cell lines corresponding to different CRC grades. On the basis of phenotypic and functional characterizations, "hyperlayer" elution resulted in a fraction overexpressing CSC markers (CD44, CD166, EpCAM) for all cell lines. CSCs were eluted in the last fraction for seven out of eight cell lines, but in the first for HCT116. These results suggest, according to the literature, that two different pools of CSCs exist, quiescent and activated, which can both be sorted by SdFFF. Moreover, according to CSC properties, enriched fractions are able to form colonies.     

Photoluminescence of GaN microcrystallites prepared by a new solvothermal process

GaN microcrystallites have been prepared by a solvothermal process. The influence of the synthesis temperature on the crystallinity of the resulting GaN has been studied on three samples, prepared at 400, 600 and 800°C in the same pressure conditions (150 MPa) and duration (6 h). The resulting powders were characterized by several techniques: X-ray diffraction to evaluate the reaction rate, scanning electron microscopy (SEM) to determine the morphology and size of the microcrystallites and photoluminescence to evaluate the quality of the powders.     

Toxicity of Silver Nanoparticles in Macrophages

Silver nanoparticles (nanosilver) are broadly used today in textiles, food packaging, household devices and bioapplications, prompting a better understanding of their toxicity and biological interactions. In particular, the cytotoxicity of nanosilver with respect to mammalian cells remains unclear, because such investigations can be biased by the nanosilver coatings and the lack of particle size control. Here, nanosilver of well‐defined size (5.7 to 20.4 nm) supported on inert nanostructured silica is produced using flame aerosol technology. The cytotoxicity of the prepared nanosilver with respect to murine macrophages is assessed in vitro because these cells are among the first to confront nanosilver upon its intake by mammals. The silica support facilitates the dispersion and stabilization of the prepared nanosilver in biological suspensions, and no other coating or functionalization is applied that could interfere with the biointeractions of nanosilver. Detailed characterization of the particles by X‐ray diffraction and electron microscopy reveals that the size of the nanosilver is well controlled. Smaller nanosilver particles release or leach larger fractions of their mass as Ag⁺ ions upon dispersion in water. This strongly influences the cytotoxicity of the nanosilver when incubated with murine macrophages. The size of the nanosilver dictates its mode of cytotoxicity (Ag⁺ ion‐specific and/or particle‐specific). The toxicity of small nanosilver (<10 nm) is mostly mediated by the released Ag⁺ ions. The influence of such ions on the toxicity of nanosilver decreases with increasing nanosilver size (>10 nm). Direct silver nanoparticle–macrophage interactions dominate the nanosilver toxicity at sizes larger than 10 nm.     

Project Preserve: A Program to Retain Minorities in Engineering

A national effort, begun in 1972 to increase the numbers of minorities in engineering, has made substantial progress, but the attrition for minority students is still estimated at 70%. To address the problem, Project Preserve was designed to confirm, by demonstration, the results of previous research showing that the combination of explicit cognitive development, close relationships with faculty, and strong bonds to an institution can raise the performance and retention of minority engineering students. The project enrolled over 100 minority engineering students who had been dismissed from freshman engineering studies on other campuses or placed on academic probation, but whose high school grades and SAT scores were indicative of success. They were channeled into participating institutions chosen for their record of basic support services, willingness to augment or restructure those services, and for variation among institutional variables: Xavier University of Louisiana (XU), California State University at Northridge (CSUN), and City College of the City University of New York (CCNY). A 2 1/2 hour battery of evaluation instruments was given to 79 students upon entry and to 26 students upon their attaining Junior status after two years in the program. The results demonstrated that: (1) an admirable 64% of would-be drop outs had achieved Junior status or were still enrolled in engineering at the conclusion of two years; (2) cognitive growth occurred on basic memory skills and one critical thinking skill, but there were institutional differences in the extent of intellectual development, with Xavier producing the most change; (3) closer relationships to faculty were outcomes; (4) the most positive feelings about, or bonding to, the institution occurred at Xavier University, while the most evidence of social participation and connectedness occurred at CSUN.     

Longitudinal analysis of the relationship between symptoms and quality of life in veterans treated for posttraumatic stress disorder.

This study examined how change in posttraumatic stress disorder (PTSD) symptoms relates to change in quality of life. The sample consisted of 325 male Vietnam veterans with chronic PTSD who participated in a randomized trial of group psychotherapy. Latent growth modeling was used to test for synchronous effects of PTSD symptom change on psychosocial and physical health-related quality of life within the same time period and lagged effects of initial PTSD symptom change on later change in quality of life. PTSD symptoms were associated with reduced quality of life before treatment. There were synchronous effects of symptom change on change in quality of life but no significant lagged effects. Results indicate the importance of measuring quality of life in future investigations of PTSD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Production and Corrosion Resistance of Thermally Sprayed Fe-Based Amorphous Coatings from Mechanically Milled Feedstock Powders

Mechanically milled FeCrNbB feedstock powders from commercial precursors were used to produce amorphous coatings through two different industrial thermal-spraying techniques: high-velocity oxygen fuel (HVOF) and flame spraying. Microstructure, thermal behavior, and hardness of the coatings and their corrosion resistances in acidic and alkaline chloride-rich media were comparatively studied. HVOF process was effective to produce ~ 200-µm-thick highly amorphous coatings with hardness over than 700 HV_0.3 and low porosity (~ 5 pct). Flame-sprayed ~ 220-µm-thick coatings were nanocrystalline, composed of α-Fe, Fe₂B, FeNbB, and Fe₂O₃ phases and presented hardness of 564 HV_0.3 and ~ 10 pct porosity. Electrochemical measurements indicated that HVOF coatings exhibit higher corrosion resistance than flame-sprayed ones thanks to the higher amorphous content and lower porosity resulting from the former processing route. Electrochemical impedance spectroscopy results demonstrated that amorphous HVOF Fe₆₀Cr₈Nb₈B₂₄ (at. pct) coatings are interesting to protect mild steels such as the API 5L X80 against corrosion in chloride-rich environments.

     

Unipolar Depression, Life Context Vulnerabilities, and Drinking to Cope.

This study followed baseline samples of 424 unipolar depressed patients and 424 community controls across 10 years to investigate the association between depression and alcohol-related coping and to examine how life context vulnerabilities underlie the risk for depressed individuals to rely on drinking to cope. Findings supported all hypotheses. Depressed patients engaged in more drinking to cope than did community controls. Within individuals, more negative life events and less family support were associated with more drinking to cope across the 4 observations. Depressed patients experienced more negative life events and less family support than did community controls. These underlying life context vulnerabilities explained the relationship between depressed patient status and drinking to cope. (PsycINFO Database Record (c) 2010 APA, all rights reserved)