100-Gb/s DQPSK Transmission Experiment Without OTDM for 100G Ethernet Transport

In order to realize a future 100-Gb Ethernet (100 GbE) transport, 100-Gb/s transmission without 100-GHz-class electronics and optical time-division-multiplexing technique was demonstrated. By using a differential quadrature phase-shift-keying (DQPSK) modulation format and commercially available electronics, 2- and 50-km transmissions of 100-Gb/s signal were successfully achieved over a standard single mode fiber. The receiver sensitivity, chromatic dispersion, and differential group delay tolerances of 100-Gb/s DQPSK signal were also evaluated. Through these evaluations, the possibility of DQPSK modulation for future 100-GbE transport is verified     

Widely wavelength-tunable ultra-flat frequency comb generation using conventional dual-drive Mach-Zehnder modulator

Wavelength-tunable ultra-flat optical frequency comb generation is demonstrated using only a conventional Mach-Zehnder modulator that is asymmetrically dual-driven by large-amplitude sinusoidal signals with different amplitudes. A 10 GHz-spaced frequency comb with a 10 dB bandwidth of 230 GHz was experimentally generated. In addition, 50 nm widely wavelength tunable operation was achieved.     

Industrial capacity planning in oligopolistic markets

Available productive capacity is determinant of a company’s success once it allows meeting the current and future demand. This article proposes a quantitative model for determining long-term productive capacity in competitive oligopolistic markets, based on the Nash Equilibrium formulated as a Variational Inequality problem. Numerical examples enable an analytical evaluation of the economic equilibrium’s sensitivity to marginal costs, investment costs, hurdle rate, and market saturation. Results show that, in order to achieve a greater market share, it is important to adopt strategies that reduce marginal costs. On the other hand, variations in the hurdle rate may or may not reinforce the position of a competitor in the market and his interest in investing in capacity expansion. Additionally, market saturation may be achieved, beyond which investment becomes unattractive. Each of these is a positive outcome for society, triggering diversified investments and competition in economic sectors where competition is low and profits are high.     

Fabrication of Nanocomposite Ceramics by Crystallization of Rapidly Solidified Eutectic Melts

Eutectic melt solidification is shown to avoid cracking during solidification by quenching an amorphous phase. Subsequent annealing results in micro/nanostructure ceramics. This strategy has been applied to HfO₂–Al₂O₃–GdAlO₃ and Y₂O₃–CaO–Al₂O₃ ternary systems that have deep eutectics. In most cases, ceramic materials cracks when they are solidified from melt due to the thermal stress accumulated on the grain boundaries, the large specific volume difference between the melt and the crystalline solid, etc. The main reason why this strategy works is that a eutectic composition yields an amorphous phase from the melts by rapid cooling and the amorphous phase enables to design crystallization without cracking by postannealing. Appropriate postannealing for the quenched amorphous enables to control the crystallization behavior from the amorphous phase, which yields nanostructured composites without cracking. For the HfO₂–Al₂O₃–GdAlO₃ case, the melt solidification and postannealing yields a nanocomposite with high transparency due to reduced scattering of 5–10 nm crystallites. For the Y₂O₃–CaO–Al₂O₃ case, a plate-shaped bulk composite is obtained without cracking by molding the melt and postannealing.     

In Vitro Simultaneous Transfer of Lipids to HDL in Coronary Artery Disease and in Statin Treatment

The exchange of lipids with cells and other lipoproteins is a crucial process in HDL metabolism and for HDL antiatherogenic function. Here, we tested a practical method to quantify the simultaneous transfer to HDL of phospholipids, free-cholesterol, esterified cholesterol and triacylglycerols and to verify the lipid transfer in patients with coronary artery disease (CAD) or undergoing statin treatment. Twenty-eight control subjects without CAD, 27 with CAD and 25 CAD patients under simvastatin treatment were studied. Plasma samples were incubated with a donor nanoemulsion prepared by ultrasonication of the constituent lipids and labeled with radioactive lipids; % lipids transferred to HDL were quantified in the HDL-containing supernatant after chemical precipitation of non-HDL fractions and the nanoemulsion. The assay was precise and reproducible. Increase of temperature (4–37 °C), of incubation period (5 min to 2 h), of HDL-cholesterol concentration (33–244 mg/dL) and of mass of nanoemulsion lipids (0.075–0.3 mg/μL) resulted in increased lipid transfer from the nanoemulsion to HDL. In contrast, increasing pH (6.5–8.5) and albumin concentration (3.5–7.0 g/dL) did not affect lipid transfer. There was no difference between CAD and control non-CAD with regard to the lipid transfer, but statin treatment reduced the transfer to HDL of all four lipids. The test herein described is a valid and practical tool for exploring an important aspect of HDL metabolism.     

Enhancement of pasta antioxidant activity with oregano and carrot leaf

Five different pasta formulations were prepared using different concentrations of carrot leaf meal (CLM) and oregano leaf meal (OLM). One control formulation (wheat flour and semolina, 70:30 w/w) and four other formulations were prepared using the following amounts of leaf meals: 5% CLM and 5% OLM (I), 10% CLM (II), 10% OLM (III), and 10% CLM, 10% OLM (IV). The highest content of alpha-linolenic acid was found in formulations II and IV, which also had a reduced n-6/n-3 ratio, 3.6 (IV), when compared to the control, which was 19.8. All the samples enhanced with leaf meals showed antioxidant activity by the DPPH radical method; however, it was higher in formulation IV, which was the same observed for phenolic compounds. Pasta added with leaf meals lost more solubles, had shorter cooking time and a lower weight increase than the control pasta. All formulations had significant sensory acceptance.     

Performance characteristics of high power CW, 1 cm wide monolithic AlGaAs laser diode arrays with a 2 mm total aperture width

One cm wide monolithic laser diode arrays emitting around 810 nm with a 2 mm total aperture width have been characterised under CW conditions. CW operation up to 16 W has been achieved at a heatsink temperature of 70 degrees C. Several arrays have been lifetested at 10 W CW at a 20 degrees C heatsink temperature for a few thousand hours and have projected lifetimes of between 5000 and 17000 hours. The temperature dependence of the degradation rate was characterised, from which data an activation energy of 0.2 eV was obtained.<>     

Organic LED full-color passive-matrix display

Abstract— A full-color 5.2-inch 1/4-VGA passive-matrix organic LED display has been developed, adopting selective deposition for the different emitting materials. The display features 320 (×3) × 240 pixels with an equivalent pixel size of 0.33 × 0.33 mm, white peak luminance of over 150 cd/m², and power consumption of 6 W.     

Regression analysis of amino acid substitutions and factor IX activity in hemophilia B

Hemophilia B is caused by a deficit or decreased activity of factor IX. Mutation in factor IX is made up of a majority of amino acid substitutions. We examined the relation between the activation level of factor IX and the category of amino acid substitution with regression analysis. As parameters, we used four physical-chemical parameters of amino acids and Dayhoff’s PAM matrix. In addition, the average of the activation level with the same amino acid substitution was used for the analysis. We analyzed the relationship between variations containing cysteine or factor IX’s seven regions and activity levels. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008