Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Thermal strain of high strength polyethylene fiber in low temperature

High strength polyethylene fiber (Toyobo, Dyneema® fiber: hereinafter abbreviated to DF) has a negative thermal expansion coefficient. Relation between fiber structure and thermal strain of DF used as reinforcement of DF reinforced plastic (DFRP) for cryogenic use was investigated. The crystallinities and orientation angles of several kinds of polyethylene fibers having different modulus from 15 to 134Gpa (herein after abbreviated to DFs) were measured by NMR and X‐ray. We obtained the parameters of the mechanical series‐parallel model composed of crystal and amorphous by crystallinity and modulus. Thermal expansion coefficients of DFs were estimated by mechanical series‐parallel model. All DFs having different modulus showed negative thermal expansion coefficients in the temperature range from 180 to 300K, and absolute values of those markedly increased by increasing tensile modulus of DF. The estimated thermal expansion coefficients showed negative values, and thermal strains showed a similar curve to observed ones mostly. Average thermal expansion coefficients in the temperature range from 180 to 300K estimated by mechanical model agreed with the observed ones. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2918–2925, 2004     

A convenient method for preparation of monofluorocarboxylic acids

Monofluoro esters were prepared by the reaction of hydroxy esters with N,N-diethyl-1,1,2,3,3,3-hexafluoro propylamine (PPDA). Saponification of these monofluoroesters with enzyme (lipase MY) was attempted to give their corresponding monofluorocarboxylic acids in moderate yields.     

Large macro-dipoles generated in a supramolecular polymer of N,N′,N″-tris(3,7-dimethyloctyl)benzene-1,3,5-tricarboxamide in n-decane

A supramolecular polymer formed by N,N′,N″-tris(3,7-dimethyloctyl)benzene-1,3,5-tricarboxamide (DO₃B) in n-decane (C₁₀) possesses large macro-dipoles naturally generated by three-fold inter-molecular hydrogen bonding aligned along its helical columnar structure connected by defective portions, which are DO₃B molecules containing failure in the hydrogen bond formation, in the order of head to tail arrangement without dipole inversion like type-A polymers.     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Assessment of weld line performance of PP/Talc moldings produced in hot runner injection molds

Weld lines are weak regions in thermoplastic injection moldings caused by low molecular entanglement and unfavorable orientation. Their occurrence may lead to a significantly reduced mechanical performance of the products. Therefore, when weld lines are likely to occur in molded products, they must be taken into account during the mechanical and technological design processes. The weld lines become more critical when particulate fillers are compounded with the polymer. The performance of weld lines in talc‐filled polypropylene box moldings produced with a double‐gated hot runner mold is assessed in this work. The processing conditions were varied in order to cause morphology and tensile‐impact resistance changes. The weld performance at room temperature was assessed in terms of the energy absorbed in the impact tests. It was found that the performance depends on the injection temperature, the injection rate, and the orientation of the talc particles in the weld‐line plane. J. VINYL ADDIT. TECHNOL., 13:159–165, 2007. © 2007 Society of Plastics Engineers     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.