出租车智能计价器优化设计与研究

随着城市发展进程的加快,出租车在城市交通中扮演着非常重要的角色,而目前出租车计价器存在不少缺陷,为此需对计价系统进行优化设计。以MCS51单片机为控制核心,通过记录安装在车轮上集成霍尔传感器发出的脉冲个数,实现正常的里程计费,设计的出租车智能计价器性能更优。文中提出了出租车智能计价系统总体设计方案,重点介绍了硬件系统和软件系统设计过程,最后还对系统进行了仿真实验。结果表明:系统功能良好,能实现智能计价功能。     

Growth mechanism of intermetallic compounds and damping properties of Sn–Ag–Cu-1 wt% nano-ZrO2 composite solders

Nano-sized, nonreacting, noncoarsening ZrO₂ ceramic particles reinforced Sn–Ag–Cu composite solders were prepared by mechanically dispersing nano-particles into Sn–Ag–Cu solder and investigated their microstructure, kinetic analysis and mechanical properties i.e., shear strength, hardness and high temperature/mechanical damping characteristics. From microstructures evaluation, it was clear that composite solders containing ZrO₂ ceramic nano-particles significantly impact on the formation of intermetallic compounds (IMCs) at their interfaces as well as refined microstructure in the solder ball regions. The growth behavior of IMCs layer at the interfaces in composite solders was lower than that of plain Sn–Ag–Cu solders. Moreover, after long time aging, some microcracks were clearly observed at the interface due to the formation of excessive IMC layer and softening nature of plain Sn–Ag–Cu solder joints.     

计算AFDX延迟的网络演算方法

介绍了航空电子全双工以太网的关键概念,并指出应用此技术时必须给出其数据帧延迟上界.分析了数据包在航空电子全双工以太网中的处理过程.给出了由网络演算方法得出的数据帧在数据接收、数据过滤、数据交换,端口存贮转发过程中的延迟.最后指出运用此方法得到的结果可作为适航依据.     

两次一维维纳滤波信道估计的一种噪声方差优化方法

 本文提出了一种基于OFDM(Orthogonal Frequency Division Multiplexing)系统的两次一维(2×1-D)维纳滤波信道估计的噪声方差优化方法.对于2×1-D维纳滤波信道估计,维纳滤波将先后应用于频域维和时域维,而两次滤波时的噪声方差实际是不相同的,但现有的2×1-D维纳滤波信道估计方法没有考虑噪声的变化.本文首先分析出了第一次滤波后残余的噪声方差,并将其优化的结果应用于第二次滤波中,然后根据不同的优化准则对信道估计性能进行了评估.仿真结果表明,同未对噪声方差优化的信道估计方法相比,本方法具有更优的性能,且非常接近两维维纳(2-D)滤波方法.     

基于Verilog-AMS的数字射频电荷采样混频器的混合信号建模与仿真

 本文给出了数字射频电荷采样混频器的一般性理论公式表达,并提出了一种基于Verilog-AMS语言和电路宏单元的混合信号建模方法,对多抽头直接采样混频器进行了建模与仿真.在建模过程中,给出了一种基于分频器、抽样器和相位调整单元的数字逻辑控制单元新结构,解决了在SpectreRF仿真环境下用Verilog-AMS语言建模时所遇到的射频频域仿真算法的状态隐藏问题.     

DTN中链路中断特性的分析

容迟网络中链路特性是影响网络性能的一个因素,而有些引起链路中断的因素有确知的和不可确知的,针对DTN网络中确定性事件影响链路中断的统计特性问题进行了分析,采用寻找两节点苏醒时间的交集即为两节点问可通信时间的方法,得到了无线链路的连接性特性随时间变化的规律.     

A Multifunctional Iridium‐Carbazolyl Orange Phosphor for High‐Performance Two‐Element WOLED Exploiting Exciton‐Managed Fluorescence/Phosphorescence

By attaching a bulky, inductively electron‐withdrawing trifluoromethyl (CF₃) group on the pyridyl ring of the rigid 2‐[3‐ (N‐phenylcarbazolyl)]pyridine cyclometalated ligand, we successfully synthesized a new heteroleptic orange‐emitting phosphorescent iridium(III) complex [Ir( L ₁ )₂(acac)] 1 ( HL ₁ = 5‐trifluoromethyl‐2‐[3‐(N‐phenylcarbazolyl)]pyridine, Hacac = acetylacetone) in good yield. The structural and electronic properties of 1 were examined by X‐ray crystallography and time‐dependent DFT calculations. The influence of CF₃ substituents on the optical, electrochemical and electroluminescence (EL) properties of 1 were studied. We note that incorporation of the carbazolyl unit facilitates the hole‐transporting ability of the complex, and more importantly, attachment of CF₃ group provides an access to a highly efficient electrophosphor for the fabrication of orange phosphorescent organic light‐emitting diodes (OLEDs) with outstanding device performance. These orange OLEDs can produce a maximum current efficiency of ～40 cd A^?1, corresponding to an external quantum efficiency of ～12% ph/el (photons per electron) and a power efficiency of ～24 lm W^?1. Remarkably, high‐performance simple two‐element white OLEDs (WOLEDs) with excellent color stability can be fabricated using an orange triplet‐harvesting emitter 1 in conjunction with a blue singlet‐harvesting emitter. By using such a new system where the host singlet is resonant with the blue fluorophore singlet state and the host triplet is resonant with the orange phosphor triplet level, this white light‐emitting structure can achieve peak EL efficiencies of 26.6 cd A^?1 and 13.5 lm W^?1 that are generally superior to other two‐element all‐fluorophore or all‐phosphor OLED counterparts in terms of both color stability and emission efficiency.     

Spatial Modulation

Spatial modulation (SM) is a recently developed transmission technique that uses multiple antennas. The basic idea is to map a block of information bits to two information carrying units: 1) a symbol that was chosen from a constellation diagram and 2) a unique transmit antenna number that was chosen from a set of transmit antennas. The use of the transmit antenna number as an information-bearing unit increases the overall spectral efficiency by the base-two logarithm of the number of transmit antennas. At the receiver, a maximum receive ratio combining algorithm is used to retrieve the transmitted block of information bits. Here, we apply SM to orthogonal frequency division multiplexing (OFDM) transmission. We develop an analytical approach for symbol error ratio (SER) analysis of the SM algorithm in independent identically distributed (i.i.d.) Rayleigh channels. The analytical and simulation results closely match. The performance and the receiver complexity of the SM-OFDM technique are compared to those of the vertical Bell Labs layered space-time (V-BLAST-OFDM) and Alamouti-OFDM algorithms. V-BLAST uses minimum mean square error (MMSE) detection with ordered successive interference cancellation. The combined effect of spatial correlation, mutual antenna coupling, and Rician fading on both coded and uncoded systems are presented. It is shown that, for the same spectral efficiency, SM results in a reduction of around 90% in receiver complexity as compared to V-BLAST and nearly the same receiver complexity as Alamouti. In addition, we show that SM achieves better performance in all studied channel conditions, as compared with other techniques. It is also shown to efficiently work for any configuration of transmit and receive antennas, even for the case of fewer receive antennas than transmit antennas.     

Effects of chromatic dispersion on optical coherent-detection systems

Chromatic dispersion induces to a phase-modulated optical signal a constand phase rotation that was never included in most previous studies. When the constant phase shift is removed by a phase-locked loop, the dispersion tolerance of a coherent-detection system is increased. The dispersion tolerance of phase-shift keying (PSK) signal is compared with differential PSK (DPSK) signals by numerical simulation and experimental measurement. Contrary to conventional belief, PSK signal has larger dispersion tolerance than DPSK signal.     

Extraction of interface states at emitter–base heterojunctions in AlGaAs/GaAs heterostructure bipolar transistors using sub-bandgap photonic excitation

Distribution of interface states at the emitter–base heterojunctions in heterostructure bipolar transistors (HBTs) is characterized by using current–voltage characteristics using sub-bandgap photonic excitation. Sub-bandgap photonic source with a photon energy E_ph which is less than the energy bandgap E_g (E_g,GaAs = 1.42, E_g,AlGaAs = 1.76 eV) of emitter, base, and collector of HBTs, is employed for exclusive excitation of carriers only from the interface states in the photo-responsive energy range at emitter–base heterointerface. The proposed method is applied to an Al_0.3Ga_0.7As/GaAs HBT (A_E = W_E × L_E = 250 × 100 μm²) with E_ph = 0.943 eV and P_opt = 3 mW. Extracted interface trap density D_it was observed to be D_it,max  4.2 × 10¹² eV⁻¹ cm⁻² at emitter–base heterointerface.