Study of dielectric, magnetic and ferroelectric properties in Bi1 − xGdxFeO3

Gd-doped BiFeO₃ polycrystalline ceramics were synthesized by solid-state reaction method and their dielectric and magnetic properties were investigated. X-ray diffraction pattern showed that Bi_1 − xGd_xFeO₃ (x = 0, 0.05 and 0.1) ceramics were rhombohedral. The Gd substitution has suppressed the usual impurity peaks present in the parent compound and we obtained single phase Bi_0.9Gd_0.1FeO₃ ceramic. Gd substitution reduced the antiferromagnetic Néel temperature (T_N) in Bi_1 − xGd_x FeO_3. An anomaly in the dielectric constant(ε) and dielectric loss(tan (δ)) in the vicinity of the antiferromagnetic Néel temperature (T_N) was observed. Ferroelectric and magnetic hysteresis loops measured at room temperature indicated the coexistence of ferroelectricity and magnetism. The room temperature magnetic hysteresis loops were not saturated, but the magnetic moment was found to increase with increase in Gd concentration.     

Antibacterial and dye degradation potential of zero‐valent silver nanoparticles synthesised using the leaf extract of Spondias dulcis

The present study reports a simple and low cost synthesis of zero‐valent silver nanoparticles (ZVSNPs) from silver nitrate using the leaf extract of Spondias dulcis. The ZVSNPs showed a unique peak at 420 nm in UV–vis spectrum. The SEM image portrayed cuboidal shaped particles. The EDX spectrum designated the elemental silver peak at 3 keV. In XRD, a sharp peak at 32.47° denoted the existence of (1 0 1) lattice plane and the average crystallite size was calculated as 48.61 nm. The lattice parameter was determined as 0.39 nm. The FTIR spectra of the leaf extract and ZVSNPs showed shifts in the specific functional group bands which ascertained the involvement of phytoconstituents in the formation and capping of nanoparticles. The average hydrodynamic size was measured as 59.66 nm by DLS method. A low PDI, 0.187 witnessed the monodispersity. A negative zeta potential value of −15.7 mV indicated the negative surface charges of the nanoparticles. The bactericidal action of ZVSNPs was demonstrated against two pathogens S.typhimurium and E.coli during which a dosage dependent zone of inhibition results was observed. Additionally, the catalytic potential of ZVSNPs was examined for the degradation of methylene blue dye in which an accelerated degradation of the dye was observed.Inspec keywords: antibacterial activity, crystallites, electrokinetic effects, scanning electron microscopy, nanoparticles, particle size, ultraviolet spectra, X‐ray chemical analysis, microorganisms, light scattering, nanofabrication, materials preparation, X‐ray diffraction, visible spectra, silver, dyes, Fourier transform infrared spectraOther keywords: wavelength 420.0 nm, Ag, voltage ‐15.7 mV, size 59.66 nm, size 0.39 nm, size 48.61 nm, electron volt energy 3.0 keV, Fourier transform infrared spectra, methylene blue dye, bactericidal action, dynamic light scattering, lattice parameter, Escherichia coli, Salmonella typhimurium, Spondias dulcis, negative zeta potential, polydispersity index, crystallite size, leaf extract, X‐ray diffraction, energy dispersive X‐ray spectrum, cuboidal‐shaped particles, scanning electron microscopy image, ultraviolet–visible spectrum, silver nitrate, zero‐valent silver nanoparticles     

Electronic and vibrational excitations in layered highT c superconductors

In the series of the layered highT _c superconductors (A)_1,2 B₂Ca _n−1Cu _n O_2n+3,4 (A=Tl or Bi;B=Ba or Sr), withn=number of consecutive Cu-O layers, the electron energy states of some of the Tl-based systems have been investigated. The electron and phonon dispersion curves have been obtained. The electronic states near the Fermi level are dominated by the hybridized Cu(d) and the O(p) orbitals. The dispersion curves are highly two-dimensional with very small dispersion alongc-axis. The number of bands is enhanced with increase in the number of the consecutive Cu-O planes (n). The present results agree with those obtained earlier for other superconducting phases. The phonons are overall dominated by the vibrations of the light mass oxygen atom modes both lying in or outside the Cu-O planes. The low-frequency phonons involve the motions of the heavier Tl, Ba atoms etc.     

Blends of cardanol-based epoxidized novolac resin and CTBN for application in surface coating: a study on thermal,mechanical, chemical,and morphological characteristics

Blend samples of cardanol-based epoxidized novolac resin and different weight percentages of carboxyl-terminated butadiene acrylonitrile (CTBN) were developed and cured with stoichiometric amounts of aliphatic amine. The formation of various products during the curing of blend samples has been studied by Fourier-transform infrared spectroscopy. The dynamic differential scanning calorimeter scans showed that the pure epoxies and their blend samples with CTBN cured in the temperature range of 100–150°C. The blend sample containing 15 wt% CTBN showed the least cure time (at 120°C) among all other blend samples. Upon evaluation, it was found that blend samples exhibit better properties compared to pure epoxy resin in terms of increase in impact strength and elongation-at-break of the casting and gloss, scratch hardness, adhesion, and flexibility of the film. The improvement in these properties indicates that the rubber modified resin would be more durable than the epoxy based on cardanol. Chemical and morphological properties of the formulated resins were also determined. The thermal stability of the blend samples containing 15 wt% CTBN in epoxy resin was the highest among all other prepared systems. The blend morphology, studied by scanning electron microscope, showed the presence of precipitated discrete rubber particles, which dispersed throughout the epoxy matrix—i.e., they revealed the presence of two-phase morphological features.     

The First Example of Saccharin‐Lithium Bromide Catalysis: Direct Synthesis of N‐Tosylimines from Alcohols

The first procedure to access N‐tosylimines directly from alcohols under mild and neutral conditions is reported. The protocol involves saccharin‐lithium bromide‐catalyzed oxidation of alcohols to aldehydes/ketones with chloramine‐T followed by their condensation with the in situ generated oxidation by‐product p‐toluenesulfonamide in the same reaction vessel to afford N‐tosylimines in 40–90% overall yields. The present work opens up a new and efficient synthetic route to N‐tosyimines directly from alcohols in a one‐pot procedure.     

Interface Trap Charges Analysis on DC and High Frequency Characteristics of UTBB-FDSOI FET

Silicon - In this paper, we have studied effect of localised charges on performance of UTBB FDSOI FET. Purpose behind this work is to understand the performance of UTBB FDSOI FET under the...     

Comparative Performance of Different Sector Arrangement in a Desiccant Wheel Using a Mathematical Model

A one‐dimensional mathematical model has been used for a three‐sector desiccant wheel (two sectors with purge) with different flow arrangements. The model considers both gas and solid side resistance and shows a good agreement with experimental results. This model has been used to conduct a comparative performance analysis in both the effective adsorption and effective regeneration sector of a desiccant wheel. It was found that an effective regeneration sector gives better results for the performance parameters (rotation of wheel, regeneration temperature, velocity, and ambient moisture) as compared to an effective adsorption sector. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21103     

Fabrication of portable solar thermal bank for indoor cooking

The aim of this report is to build a portable solar thermal bank based on a Scheffler reflector that is capable of boiling-type cooking using HITEC as a thermal storage material. This report reviews the problems related to solar cooking and evaluates the novel layout of a portable solar thermal bank which includes a daily thermal storage vessel. This stove is in the shape of a cylindrical container filled with phase-changing latent heat storage material. Inside the container, we provide a small gap taking into account the volumetric expansion of the phase change material (PCM) during the melting process. The solar thermal bank is charged in the sun. It is placed directly for a few hours under the focus of a Scheffler reflector, which charges the solar thermal bank with enough thermal energy stored. After a while, the cooking process can be completed by users using that stored heat. The top cavity is used as a cooking pot in a solar thermal bank. Cooking meals do not require direct sunlight, which is typical for most solar cookers. The portable solar thermal bank is an alternative for low-income households and adapts to local traditions of indoor cooking. It is portable and can be used safely to cook indoors or outdoors. In this study, a solar cooker with a thermal storage device was developed using a PCM. The size of the stove has been calculated by calculating the energy consumption for two to three people. HITEC salt has been chosen as a phase change material for thermal storage, which will be used for cooking when there is no sunlight. It enhances the applicability of solar cooking and preserves cooking possibilities using energy stored throughout the day at low production costs.     

Alkylation of hydroquinone with methyl-tert-butyl-ether and tert-butanol

The alkylation of hydroquinone yields industrially important compounds, amongst which tert-butylhydroquinone is a very important precursor for its use in pharmaceuticals and in developing photographic plates. Twenty per cent (w/w) dodecatungstophosphoric acid supported on K10 montmorillonite clay (DTP/K10) was found to be a very efficient and novel catalyst in comparison with several others for alkylation of hydroquinone with different alkylating agents such as methyl-tert-butyl-ether (MTBE) and tert-butanol at 150°C in an autoclave. A summary of characterisation of DTP/K10 is provided and related to the activity. Various reaction parameters were also investigated and a kinetic model was built. The rate of alkylation with MTBE was much faster than that with tert-butanol. The reaction follows a typical second order kinetics at a fixed catalyst loading with weak adsorption of both the species. The energy of activation was found to be 19.34 kcal/mol.     

Hybrid connection algorithm: A strategy for efficient restoration in WDM optical networks

In present communication, we propose a modified resource allocation strategy, namely, hybrid connection algorithm, for achieving efficient restoration in WDM optical networks. The main theme of the algorithm is that, while attempting connection establishment, a wavelength is reserved in advance for providing resources for backup lightpaths. The analysis and the comparison of the proposed strategy with other existing strategies has been undertaken using metrics such as, restoration efficiency, number of wavelength links used by primary and backup lightpaths, and the percent link utilization. The proposed strategy provides 100% restoration efficiency and much better performance than the existing techniques.