Unified equation of state based on the lattice fluid theory for phase equilibria of complex mixtures part I. Molecular thermodynamic framework

Consistent calculation of fugacities of fluid mixtures remains as one of the most important subjects in contemporary molecular thermodynamics. In practice, equations of state (EOSs) and g^E-models have been used. However, most EOSs are erroneous for condensed phases at high densities and g^E-models are inapplicable for pressuresensitive systems. Recently to remedy the shortcomings in both approaches, there has been a surge of new g^E-EOS mixing rules. By equating any set of EOS and g^E-models, the limitations in both approaches could be resolved significantly. However, the self-consistency in the underlying concept of those mixing rules remains controversial. During the last several years, the present authors proposed a new lattice-fluid EOS and its simplification relevant to phase equilibrium calculations. Without employing any g^E-EOS mixing rule and with only two parameters for a pure component and one adjustable interaction energy parameter for a binary mixture, results obtained to date demonstrated that the EOSs are quantitatively applicable to a great variety of phase equilibrium properties of mixtures, especially, for complex and/or macromolecular systems. In the present article we summarize the EOSs and extended the applications to liquid-liquid Equilibria. In part I, we discussed briefly the molecular thermodynamic aspects of general derivation of the EOS and a brief discussion of applying the EOSs to pure fluids while the illustrative application to various real mixture systems is discussed in part II.     

Production of a TiN film with nanoscale particle size by a combined method of plasma-alloy reaction and spray deposition

On leave from: Honda Research and Development Co., Ltd, Wako 351-01, Japan.     

Kinetics of zinc oxide formation from zinc sulfide by reaction with lime in the presence of water vapor

A novel reaction scheme for transforming certain metal sulfides to the corresponding oxides has been developed. In this process, steam oxidizes the sulfide into the oxide, and the hydrogen sulfide produced reacts with lime to form calcium sulfide and regenerate steam. There is no net consumption or generation of gaseous species. Thus, the overall reaction can be carried out in a closed system as far as the gas phase is concerned. This eliminates the possibility of emitting hydrogen sulfide out of the reactor. Only certain metal sulfides are thermodynamically amenable to this treatment. In this paper, the reaction of ZnS to ZnO by this scheme is described, together with a detailed formulation of the rate equation for the overall reaction based on the kinetics of the component gas-solid reactions. Although the present work was done with CaO, other suitable oxides may be used in its place. A further potential application of this process is to the selective oxidation of certain sulfide(s) from complex sulfide ores as a treatment prior to the separation of minerals.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Single fundamental mode photonic crystal vertical cavity laser with improved output power

The single fundamental mode output power of photonic crystal vertical cavity lasers is improved by varying sizes of oxide apertures and defect lasing apertures. A maximum output power of 3.1 mW in the fundamental mode has been achieved with a new fabrication process that involves only focused ion beam etching to create holes in selectively oxidised VCSELs.     

Joint data rate and power allocation for lifetime maximization in interference limited ad hoc networks

In this paper, we consider the following problem in the wireless ad hoc network: Given a set of paths between source and destination, how to divide the data flow among the paths and how to control the transmission rates, times, and powers of the individual links in order to maximize the operation time of the worst network node. If all nodes are of equal importance, the operation time of the worst node is also the lifetime of the network. By solving the problem, our aim is to investigate how the network lifetime is affected by link conditions such as the maximum transmission power of a node and the peak data rate of a link. For the purpose, we start from a system model that incorporates the carrier to interference ratio (CIR) into a variable data rate of a link. With this, we can develop an iterative algorithm for the lifetime maximization, which resembles to the distributed power control in cellular systems. Numerical examples on the iterative algorithm are included to illustrate the network lifetime as a function of the maximum transmission power and the peak data rate.     

Rheological properties of polypropylene modified by high‐intensity ultrasonic waves

A new method using high‐intensity ultrasonic waves, instead of peroxide‐aided reactive extrusion, was applied to modify a linear polypropylene into a branched structure. The ultrasonic waves induced chain scission and created reactive macromolecules of polypropylene successfully in the melt state without any peroxide. To enhance and control the recombination reaction during sonication, a multifunctional agent and an antioxidant were used. The rheological property measurements clearly confirmed that the modified polypropylene had a nonlinear branched structure. It showed shear‐thinning behaviors in its viscosities at low frequencies, high elastic behaviors in Cole–Cole plots, and a high rheological polydispersity index in comparison with a linear polypropylene. The degradation or recombination of polypropylene was adequately controlled by an antioxidant, which stabilized the structure during sonication. Also, the use of an antioxidant was quite effective in improving the extrusion processability by delaying the instability of the extrudate to a higher shear rate. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Rapid and comprehensive indicator for evaluation of performance of treatment processes and of river waters.

Naturally occurring UV active compounds, commonly present in almost all source waters, can be rapidly monitored by their ultraviolet absorbance at 260 nm (E260). Herein, the extent of correlation between the E260 and the removal efficiency of the hazardous contaminants, endocrine disrupters and dioxins, were investigated using various treatment and river source waters. The detection of various types of hazardous contaminants using sophisticated analytical methods, such as high resolution gas chromatography (HRGC)/high resolution mass spectrometry (HRMS) and high performance liquid chromatography (HPLC)/inductively coupled plasma (ICP)/mass spectrometry (MS), as well as various short-term bioassays, can require hours or even days for results to be obtained. The removal of the E260 correlated well with those of individual contaminants, such as endocrine disruptor chemicals and dioxins, with the various treatment processes employed. In the plots of the endocrine disrupters against the DOC/E260, a correlation was found with the endocrine activity of the Korean/Japanese river waters employed in this study.