Erbium-doped fiber amplifier second-order distortion in analog links and electronic compensation

The authors study the second-order distortion when an erbium-doped fiber amplifier (EDFA) is used to amplify the analog optical AM cable TV (CATV) multiple carrier signal from a directly modulated distributed feedback (DFB) semiconductor laser. Experimentally, it was seen that this second order distortion depends critically on the gain of the EDFA fiber amplifier. The authors attribute this distortion to the interaction between the frequency chirping of the DFB laser and the variable gain with wavelength of the amplifier. The authors describe an electronic predistorter that compensates the nonlinearity produced by the DFB-laser-EDFA combination. As a result, the high power advantage of the EDFA can be fully realized in spite of the potential for second-order distortion in the system.<>     

A two-stage capacitive-feedback differencing amplifier for temporal contrast IR sensors

This article presents a small-area, ultra low-power, low-mismatch differencing transient amplifier for ROIC pixels of micro-bolometer based temporal contrast IR sensors. The two-stage capacitive-feedback amplifier works in the sub-threshold domain, has a voltage gain of 46 dB, a 3 dB bandwidth of about 10 kHz and consumes 85 nW of static power. The amplifier circuit has been fabricated in a 0.35 μm standard CMOS process and consumes less than 2000 μm² of silicon area, enabling a square pixel size of 50 × 50 μm for the IR sensor array.     

Organic Phenolic Configurationally Locked Polyene Single Crystals for Electro‐optic and Terahertz Wave Applications

We investigate a configurationally locked polyene (CLP) crystal 2‐(3‐(4‐hydroxystyryl)‐5,5‐dimethylcyclohex‐2‐enylidene)malononitrile (OH1) containing a phenolic electron donor, which also acts as a hydrogen bond donor. The OH1 crystals with orthorhombic space group Pna2₁ (point group mm2) exhibit large second‐order nonlinear optical figures of merit, high thermal stability and very favorable crystal growth characteristics. Higher solubility in methanol and a larger temperature difference between the melting temperature and the decomposition temperature of OH1 compared to analogous CLP crystals, are of advantage for solution and melt crystal growth, respectively. Acentric bulk OH1 crystals of large sizes with side lengths of up to 1 cm with excellent optical quality have been successfully grown from methanol solution. The microscopic and macroscopic nonlinearities of the OH1 crystals are investigated theoretically and experimentally. The OH1 crystals exhibit a large macroscopic nonlinearity with four times larger powder second harmonic generation efficiency than that of analogous CLP crystals containing dimethylamino electron donor. A very high potential of OH1 crystals for broadband THz wave emitters in the full frequency range of 0.1–3 THz by optical rectification of 160 fs pulses has been demonstrated.     

Controlling Chiral Spin States of a Triangular‐Lattice Magnet by Cooling in a Magnetic Field

Magnetic materials with a non‐collinear and non‐coplanar arrangement of magnetic moments hosting a nonzero scalar spin‐chirality exhibit unique magnetic and spin‐dependent electronic transport properties. The spin chirality often occurs in materials where competing exchange interactions lead to geometrical frustrations between magnetic moments and to a strong coupling between the crystal lattice and the magnetic structure. These characteristics are particularly strong in Mn‐based antiperovskites where the interactions and chirality can be tuned by substitutional modifications of the crystalline lattice. This study presents evidence for the formation of two unequal chiral spin states in magnetically ordered Mn_3.338Ni_0.651N antiperovskite based on density functional theory calculations and supported by magnetization measurements after cooling in a magnetic field. The existence of two scalar spin‐chiralities of opposite sign and different magnitude is demonstrated by a vertical shift of the magnetic‐field dependent magnetization and Hall effect at low fields and from an asymmetrical magnetoresistivity when the applied magnetic field is oriented parallel or antiparallel to the direction of the cooling field. This opens up the possibility of manipulating the spin chirality for potential use in the emerging field of chiral spintronics.     

An Adaptable and Scalable Generator of Distributed Massive MIMO Baseband Processing Systems

Journal of Signal Processing Systems - This paper presents an algorithm-adaptable, scalable, and platform-portable generator for massive multiple-input multiple-output (MIMO) baseband processing...     

Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells

The performance of polymer:fullerene bulk heterojunction solar cells is heavily influenced by the interpenetrating nanostructure formed by the two semiconductors because the size of the phases, the nature of the interface, and molecular packing affect exciton dissociation, recombination, and charge transport. Here, X‐ray diffraction is used to demonstrate the formation of stable, well‐ordered bimolecular crystals of fullerene intercalated between the side‐chains of the semiconducting polymer poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene. It is shown that fullerene intercalation is general and is likely to occur in blends with both amorphous and semicrystalline polymers when there is enough free volume between the side‐chains to accommodate the fullerene molecule. These findings offer explanations for why luminescence is completely quenched in crystals much larger than exciton diffusion lengths, how the hole mobility of poly(2‐methoxy‐5‐(3′,7′‐dimethyloxy)‐p‐phylene vinylene) increases by over 2 orders of magnitude when blended with fullerene derivatives, and why large‐scale phase separation occurs in some polymer:fullerene blend ratios while thermodynamically stable mixing on the molecular scale occurs for others. Furthermore, it is shown that intercalation of fullerenes between side chains mostly determines the optimum polymer:fullerene blending ratios. These discoveries suggest a method of intentionally designing bimolecular crystals and tuning their properties to create novel materials for photovoltaic and other applications.     

4D Printing at the Microscale

3D printing of adaptive and dynamic structures, also known as 4D printing, is one of the key challenges in contemporary materials science. The additional dimension refers to the ability of 3D printed structures to change their properties—for example, shape—over time in a controlled fashion as the result of external stimulation. Within the last years, significant efforts have been undertaken in the development of new responsive materials for printing at the macroscale. However, 4D printing at the microscale is still in its early stages. Thus, this progress report will focus on emerging materials for 4D printing at the microscale as well as their challenges and potential applications. Hydrogels and liquid crystalline and composite materials have been identified as the main classes of materials representing the state of the art of the growing field. For each type of material, the challenges and critical barriers in the material design and their performance in 4D microprinting are discussed. Importantly, further necessary strategies are proposed to overcome the limitations of the current approaches and move toward their application in fields such as biomedicine, microrobotics, or optics.     

Molecular Dynamics Simulation of MBE Growth of CdTe/ZnTe/Si

We simulate in three dimensions molecular beam epitaxial (MBE) growth of CdTe/ZnTe/Si using classical molecular dynamics. Atomic interactions are simulated with Stillinger–Weber potentials, whose parameters are obtained by fitting to experimental data or density function theory-calculated distortion energies of the component crystals. The effects of substrate temperature and atomic species flux ratios on epilayer morphology are investigated. The agreement between simulations and experiments suggests that this model has reasonable ability to predict the microstructures of CdTe/ZnTe/Si grown by MBE.     

A new dithienosilole-based oligothiophene with methyldicyanovinyl groups for high performance solution-processed organic solar cells

A new linear dithienosilole-based oligothiophene end-capped with methyl and electron-withdrawing dicyanovinyl groups, DTS(Oct)₂-(2T-DCV-Me)₂, was prepared in good yield. This oligomer exhibited broad absorption spectra in bulk down to the near-IR region with the optical edge at 900 nm, resulting in an initially high power conversion efficiency of 5.44% in solution-processed organic solar cells using PC₇₁BM as an acceptor.