基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。     

降雨衰减对移动卫星系统通信的影响及补偿

针对移动卫星系统的特点，分析了降雨引起的信号衰减的原因，给出了雨衰的计算方法。Ka波段一般用于移动通信业务，从分析结果上看该波段信号受降雨影响较大。提出几种补偿雨衰的方法，给出了上行功率控制法的系统原理图。     

基于感知器的快速彩色图像无损压缩算法

针对彩色图像像素和颜色分量之间存在的相关性，将神经网络中的感知器技术引入彩色图像的无损压缩算法中，提出了一种新的预测模型。应用感知器的自学习和自适应能力，对预测值进行自适应调整，使算法在运行过程中具有很小的预测残差并具有较小的动态范围。同时应用颜色空间变换来减小颜色分量间的相关性。相对于新的国际标准JPEG—LS，这种预测模型具有较低的计算复杂性。对比实验结果说明，这种算法的性能明显优于传统算法，在压缩比损失很小的前提下，其执行速度高于JPEG—LS。     

128×128红外焦平面阵列时序分析与温控电路设计

介绍了微测辐射热计的 12 8× 12 8凝视型非致冷红外热像仪的系统框图 ,论述了一种新型的红外焦平面阵列温控电路设计方案以及读出电路时序的FPGA实现方法 .该方案具有高集成度、高精度、低成本、布线简单等优点 ,为热像仪系统的研制开发提供了设计思想 .     

孔隙度校正缺乏理论依据

储油岩石一般为致密介质。致密介质在应力作用下，以本体变形（弹性变形）为主，孔隙度不发生变化。油气储量计算时，地面实测孔隙度不发生变化。油汽储量计算时，地面实测孔隙度不需要进行校正。传统的孔隙度校正无形中损失了一部分地质储量，同时为确定校正值大小也浪费了大量人力和物力。致密岩石弹性变形过程中的孔隙度不变性原则将给储量计算带来很大的方便。     

可靠性预计方法及思考

本文介绍了可靠性预计的目的,并对当前较为常见的可靠性预计模型或方法做了比较和说明,也对造成可靠性预计局限性的原因做了分析,最后对在可靠性工程工作中对待可靠性预计的态度做了探讨.     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)

Associations (dimer or aggregate) of anthracene (An) fluorophores tend to interrupt the monomer emission and reduce the quantum yield (Φ_PL); therefore, poly(methyl methacrylate) (PMMA) chain was used in this study to chemically link to anthracene and to block the mutual associations among the anthracene fluorophores. With this aim, the target polymers were prepared by anionic polymerizations with 9,10‐dibromoanthracene/s‐butyllithium as initiating system to proceed polymerizations of methyl methacrylate (MMA) directly or in the presence of 1,1‐diphenylethylene (DPE). Use of DPE before addition of MMA produces stable initiating anionic species and avoids potential side reactions during polymerization; however, it also introduces four β‐phenylene rings around the central anthracene ring, which interfere with the corresponding emission pattern and reduce the Φ_PL (32%) value due to potential interactions between phenylene rings and anthracene. On the contrast, polymerization without participation of DPE results in polymer with central anthracene ring directly connected to two PMMA chains, which gives clean vibronic emission pattern with limited association emissions and enhanced Φ_PL (52%) value. Physical blending of anthracene by PMMA is less efficient to restrain the associations and results in a film of lower Φ_PL (20%). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008