Performance analysis of OFDMA uplink systems with symbol timing misalignment

This letter presents our investigation for the effect of symbol timing errors in orthogonal frequency-division multiple access (OFDMA) uplink systems. We express the symbol timing errors between users as the symbol timing misalignments with respect to the desired user. Then, we derive an explicit expression of the signal-to-noise ratio (SNR) as a function of the maximum value of the symbol timing misalignments. Analyses and simulation results show that, to achieve an SNR of 20 dB, the maximum value of the symbol timing misalignments must be less than the cyclic prefix duration plus 6.25% of the useful symbol duration. Based on the resulting SNR degradation, we evaluate the SNR gain with guard subcarriers in order to mitigate the effect of the symbol timing misalignments.     

The design and the fabrication of monolithically integrated GaInAsP MQW laser with butt-coupled waveguide

We optimized the etching process for butt coupling to improve the reproducibility and the uniformity of the process for the integrated GaInAsP multiquantum-well laser with a butt-coupled waveguide. Three different ways of etching process were tested, which are reactive ion etching (RIE), RIE followed by a small amount (50 nm thick) of selective wet etching, and RIE followed by an adequate amount (125 nm thick) of selective wet etching. RIE followed by an adequate amount of selective wet etching showed the superior properties to the common expectation on RIE only, giving the measured coupling efficiency 96/spl plusmn/1.7% versus 34/spl plusmn/8%. The high coupling efficiency and the very small variation across a quarter of a 2-in wafer demonstrate that RIE coupled with an adequate amount of selective wet etching can also replace the conventional process for butt coupling, RIE followed by HBr-based nonselective wet etching, to fabricate high-quality integrated photonic devices.     

Design of Parasitic Inductance Reduction in GaN Cascode FET for High‐Efficiency Operation

This paper presents a method of parasitic inductance reduction for high‐speed switching and high‐efficiency operation of a cascode structure with a low‐voltage enhancement‐mode silicon (Si) metal–oxide–semiconductor field‐effect transistor (MOSFET) and a high‐voltage depletion‐mode gallium nitride (GaN) field‐effect transistor (FET). The method is proposed to add a bonding wire interconnected between the source electrode of the Si MOSFET and the gate electrode of the GaN FET in a conventional cascode structure package to reduce the most critical inductance, which provides the major switching loss for a high switching speed and high efficiency. From the measured results of the proposed and conventional GaN cascode FETs, the rising and falling times of the proposed GaN cascode FET were up to 3.4% and 8.0% faster than those of the conventional GaN cascode FET, respectively, under measurement conditions of 30 V and 5 A. During the rising and falling times, the energy losses of the proposed GaN cascode FET were up to 0.3% and 6.7% lower than those of the conventional GaN cascode FET, respectively.     

Efficient geocasting with multi-target regions in mobile multi-hop wireless networks

Geocasting, a variation on the notion of multicasting, is a mechanism to deliver messages of interest to all nodes within a certain geographical target region. Although several geocasting protocols have already been proposed for multi-hop wireless networks, most of these algorithms consider a “single” target region only. Here, when more than one target regions need to receive the same geocast messages, multiple transmissions need to be initiated separately by the message source. This causes significant performance degradation due to redundant packet transmissions, and it becomes more severe as the number of target regions increase. To solve this problem, we propose a basic scheme and its variations which utilize the geometric concept of “Fermat point” to determine the optimal junction point among multiple geocast regions from the source node. Our simulation study using ns-2 shows that the proposed schemes can effectively reduce the overhead of message delivery while maintaining a high delivery ratio in mobile multi-hop wireless networks.     

Intracranial Pressure Telemetry System Using Semicustom Integrated Circuits

A new generation of implantable, telemetric transmitters for intracranial pressure (ICP) measurements have been developed. A unique technique used in packaging the silicon piezoresistive pt essure transducer provides excellent long-term stability. Pulse code modulation is used for data transmission over a radio frequency (RF) link. To minimize the component count, two semicustom, bipolar integrated circuits are used. The transmitter electronics are housed inside a 29 ×20 ×7 mm titanium package along with the pressure transducer and two lithium batteries. Even though the transmitter consumes less than 0.4 mW of power, it is turned on remotely via RF signal transduction only on demand in order to extend the lifetime of the batteries to years. The pressure input of the transmitter has a dynamic range of ?100- +200 mmHg with a 0.3 mmHg resolution and a 1 mmHg accuracy. Long-term in vitro and in vivo pressure baseline stabilities of better than 1 and 2 mmHg per month, respectively, have been achieved.     

A Triode Device with a Gate Controllable Schottky Barrier: Germanium Nanowire Transistors and Their Applications

Electrical contacts often dominate charge transport properties at the nanoscale because of considerable differences in nanoelectronic device interfaces arising from unique geometric and electrostatic features. Transistors with a tunable Schottky barrier between the metal and semiconductor interface might simplify circuit design. Here, germanium nanowire (Ge NW) transistors with Cu₃Ge as source/drain contacts formed by both buffered oxide etching treatments and rapid thermal annealing are reported. The transistors based on this Cu₃Ge/Ge/Cu₃Ge heterostructure show ambipolar transistor behavior with a large on/off current ratio of more than 10⁵ and 10³ for the hole and electron regimes at room temperature, respectively. Investigations of temperature‐dependent transport properties and low‐frequency current fluctuations reveal that the tunable effective Schottky barriers of the Ge NW transistors accounted for the ambipolar behaviors. It is further shown that this ambipolarity can be used to realize binary‐signal and data‐storage functions, which greatly simplify circuit design compared with conventional technologies.     

Stable and High-Power Calcium-Ion Batteries Enabled by Calcium Intercalation into Graphite

Calcium-ion batteries (CIBs) are considered to be promising next-generation energy storage systems because of the natural abundance of calcium and the multivalent calcium ions with low redox potential close to that of lithium. However, the practical realization of high-energy and high-power CIBs is elusive owing to the lack of suitable electrodes and the sluggish diffusion of calcium ions in most intercalation hosts. Herein, it is demonstrated that calcium-ion intercalation can be remarkably fast and reversible in natural graphite, constituting the first step toward the realization of high-power calcium electrodes. It is shown that a graphite electrode exhibits an exceptionally high rate capability up to 2 A g⁻¹, delivering ≈75% of the specific capacity at 50 mA g⁻¹ with full calcium intercalation in graphite corresponding to ≈97 mAh g⁻¹. Moreover, the capacity stably maintains over 200 cycles without notable cycle degradation. It is found that the calcium ions are intercalated into graphite galleries with a staging process. The intercalation mechanisms of the “calciated” graphite are elucidated using a suite of techniques including synchrotron in situ X-ray diffraction, nuclear magnetic resonance, and first-principles calculations. The versatile intercalation chemistry of graphite observed here is expected to spur the development of high-power CIBs.     

Antioxidant Activities and Polyphenolic Constituents of Bitter Bean Parkia Speciosa

Bitter bean (Parkia speciosa), also known as petai, is a popular non-timber forest product. Traditionally, its fruits are consumed as vegetables and herbal medicines in Malaysia. The present study aimed to evaluate the antioxidant activities of aqueous and ethanol extracts of P. speciosa empty pods using various antioxidant assays, as well as examining their polyphenolic constituent contents. Results showed that with the exception of superoxide radical scavenging activity, ethanol extracts possessed stronger DPPH and ABTS radical scavenging, anti-lipid peroxidation, metal chelating and reducing power activities than aqueous extracts. It was found to contain a higher level of total flavonoids and total phenols than aqueous extracts. The major polyphenolic constituents present in these extracts were gallic acid, catechin, ellagic acid, and quercetin. Although aqueous extracts contained a higher level in gallic acid, its catechin, ellagic acid, and quercetin contents were lower than ethanol extracts. Taken together, the higher amount of polyphenolic compounds present in ethanol extracts could have contributed to its stronger antioxidant activities than aqueous extracts; these results also provided the chemical basis for certain health benefits claimed of P. speciosa empty pods in folk medicine and as foods.     

Evaluation of three different microbial inhibition tests for the detection of sulphamethazine residues in the edible tissues of rabbit

The aim of the present study was to evaluate three microbial inhibition tests (MIT) based on inhibition of growth of the test organisms: (a) four plate test (FPT) containing Bacillus subtilis BGA, (b) screening test for antibiotic residues (STAR) containing Bacillus stearothermophilus var. calidolactis_ATCC 10149 and (c) the Premi®Test containing Bacillus stearothermophilus var. calidolactis. The tests were used to determine sulphamethazine (SMZ) residues in edible tissues of rabbit after oral administration up to day 15 of the withdrawal period (WP). A solvent extraction procedure was used to enhance the capability of the tests to detect SMZ residues at or below the maximum residue limit (MRL). Para-aminobenzoic acid (PABA) was employed to previously identify SMZ residues in the first stage of the residue screening. The presence of SMZ residues in the samples was confirmed and quantified by a validated HPLC method. The Premi®Test detected SMZ residues in the muscle and heart tissue up to day 9 of the WP, and in the liver, lungs and kidneys up to day 10 of the WP. The STAR detected SMZ residues in the edible organs of rabbits up to day 8 of the WP. The kidneys were positive up to day 5 of the WP, the liver until day 4 of the WP and the lungs until day 3 of the WP. No SMZ residues were detected in the muscle and heart. By using the solvent extraction procedure, SMZ residues were detected in the muscle extract up to day 10 of the WP and the muscle was positive until day 6 of the WP. No detection sensitivity was observed using the FPT. After solvent extraction, SMZ residues were detected in the muscle extract until day 8 of the WP and the muscle was positive until day 3 of the WP. No positive results were detected after the addition of PABA into/onto the agar medium. PABA at a concentration of 10 µg ml^?1 completely reversed the inhibitory activity of SMZ and enabled reliable identification of SMZ in the examined samples. Using HPLC, SMZ was detected in the muscle samples until day 10 of WP (0.02 mg kg^?1) and in the liver until day 12 of the WP (0.09 mg kg^?1). The results obtained by the HPLC method and the limit of detection (LOD) of screening tests for SMZ (FPT 0.4 µg ml^?1, STAR 0.2 µg ml^?1, Premi® Test 0.05 µg ml^?1) allowed us to state that the most suitable screening tests for the detection of SMZ residues in the edible tissues of rabbits at level corresponding to the MRL of 0.1 mg kg^?1, established for sulphonamides, are the Premi®Test and STAR in conjunction with the solvent-extraction procedure.