The investigation of metastable ζ-hcp phase in the Ag-rich f c c region of Ag-In alloys rapidly quenched from the melt

Stacking faults, which were detected in the Ag-In system, have been examined by transmission electron microscopy and electron diffraction. An enhanced concentration of stacking faults in splat cooled specimens as well as the formation of a metastable hexagonal phase in the f c c region of the alloy was observed. As far as we know this is the first case of the terminal solid solubility being reduced by rapid quenching. Terminal solid solubility is reduced because of the high concentration of structural defects introduced by quenching, e.g. dislocations and stacking faults, which serve as the nuclei for the transformation from the f c c to the h c p structure. Our measurements and calculations show that the stacking fault energy minimum is shifted to lower electron concentrations with respect to the stacking fault energy minimum corresponding to the equilibrium phase boundary for the f c c-h c p transformation. The new metastable phase boundary for this transformation was confirmed by X-ray examinations. We explain this earlier h c p phase appearance in rapid quenched specimens as the consequence of enhanced interaction of the Fermi surface and contracted Brillouin zone. The Brillouin zone contraction we attributed to quenched-in vacancies.     

Observation of a half-quantum-flux periodicity pattern in an rf SQUID with small critical currents

We have found experimentally that rf SQUID's working in a nonhysteretic mode with small critical currents give exactly at resonance and at very low rf bias a triangular pattern with a period equal to half of one elementary quantum of magnetic flux. We discuss a possible explanation of this peculiar result.     

Mechanical and fracture behavior of powder metalurgy processed Ti3Al-based alloys

This work considers structural and compression mechanical properties of three Ti₃Al-based alloys processed by powder metallurgy. Mechanically alloyed powders were compacted by hot-pressing to non-porous homogenous compacts. Prior to compression tests, all compacts were homogenized by a solution treatment at 1050°C (α + β region) for 1h, followed by water quenching. The compression tests were performed from room temperature to 500°C in vacuum at a strain rate of 2.4 × 10⁻³ s⁻¹. Detailed microstructural characterization has been evaluated by scanning electron microscopy (SEM), followed by electron dispersive spectroscopy (EDS) and X-ray diffraction analysis. Fracture topography was examined by SEM. The Ti₃Al-Nb alloy exhibits the highest ductility in the whole temperature range, whereas addition of Mo to Ti₃Al-Nb alloy yields the highest ultimate compression strength. A correlation between ductility and the fracture mode exists for all materials.     

Thermophysical Analysis of Sandstone by Pulse Transient Method

Stones belong to porous materials where water in pores plays an important role during the freeze–thaw process. A thermophysical analysis based on the pulse transient method has been used to study an ageing cycle, namely the freeze–thaw cycle. Thermophysical analysis is based on measuring the thermophysical properties under specific thermodynamic conditions. The transient method determines the specific heat, thermal diffusivity, and thermal conductivity by a single measurement. A specimen of Sander sandstone was analyzed in both dry and water-saturated states. Typical anomalies of all thermophysical parameters at the freeze–thaw point as well as differences for the dry and saturated states were found. The changes of thermophysical parameters measured when using freeze–thaw cycles correspond to stone ageing. The freeze–thaw cycle can often be encountered in building physics, concrete construction, etcPaper presented at the Seventh Asian Thermophysical Properties Conference, August 23–28, 2004, Hefei and Huangshan, Anhui, P. R. China.     

Topology optimization with displacement constraints: a bilevel programming approach

We consider the minimum-compliance formulation of the truss topology problem with additional linear constraints on the displacements: the so-called displacement constraints. We propose a new bilevel programming approach to this problem. Our primal goal (upper-level) is to satisfy the displacement constraint as well as possible — we minimize the gap between the actual and prescribed displacement. Our second goal (lower level) is to minimize the compliance — we still want to find the stiffest structure satisfying the displacement constraints. On the lower level we solve a standard truss topology problem and hence we can solve it in the formulation suitable for the fast interior point alogrithms. The overall bilevel problem is solved by means of the so-called implicit programming approach. This approach leads to a nonsmooth optimization problem which is finally solved by a nonsmooth solver.     

Low-frequency quadrature mode birdcage resonator

The birdcage resonator is frequently used in conventional MRI because of its excellent attributes. Its use in low-field MRI is restricted to field strengths higher than, for example, 0.1 T, dependent on the size of the coil. This is because of the intrinsically low inductance value of the birdcage coils. Furthermore, the sensitivity of the birdcage at low field strengths is significantly lower when compared to, for example, the solenoid. Both problems can be overcome with the multiturn technique and a novel wound birdcage coil. The quadrature mode wound birdcage coil presented in this paper can be used at frequencies as low as 100 kHz. Its sensitivity is also increased when compared to the conventional strip-ring birdcage. Homogeneity effective volume, and methods to increase the resonator bandwidth to match the signal bandwidth are left intact. The latter is a typical low-field problem.     

Automatic reconstruction of 3D human arm motion from a monocular image sequence

A model-based approach to reconstruction of 3D human arm motion from a monocular image sequence taken under orthographic projection is presented. The reconstruction is divided into two stages. First, a 2D shape model is used to track the arm silhouettes and second-order curves are used to model the arm based on an iteratively reweighted least square method. As a result, 2D stick figures are extracted. In the second stage, the stick figures are backprojected into the scene. 3D postures are reconstructed using the constraints of a 3D kinematic model of the human arm. The motion of the arm is then derived as a transition between the arm postures. Applications of these results are foreseen in the analysis of human motion patterns. Received: 26 January 1996 / Accepted: 17 July 1997     

Czech project in history of mathematics

The paper describes the Czech project in the history of mathematics which was initiated at the Faculty of Mathematics and Physics of Charles University in Prague at the end of the eighties of the 20th century. Its main aim is to map the development of mathematical research in the Czech lands in the second half of the nineteenth and the first half of the twentieth century. The main result of this project is the production of monographs. These chart out the life and work of some prominent Czech personalities-mathematicians who have had substantial influence on the development of Czech mathematics. The aim of the project, the structure of the monographs and the general method are discussed in the paper.     

The PIBETA spectrometer for studying rare and forbidden decays of muons and pions

The construction and characteristics of the PIBETA spectrometer are described. This spectrometer is designed to implement a program of precise measurement of pion decay ^{+ 0} + e ⁺ + _e at the Paul Scherrer Institute (Switzerland). A spherical calorimeter, consisting of 240 crystals of pure CsI scintillator and embracing a solid angle of 3, is the main detector of the setup. In addition, the spectrometer is composed of an active collimator (which also acts as a beam degrader), a segmented active plastic target, two multiwire cylindrical proportional chambers, a 20-element cylindrical plastic hodoscope, and veto counters of cosmic muons.__________Translated from Pribory i Tekhnika Eksperimenta, No. 2, 2005, pp. 39–48.Original Russian Text Copyright © 2005 by Baranov, Kalinnikov, Karpukhin, Khomutov, A. Korenchenko, S. Korenchenko, Kravchuk, Kuchinskii, Mzhaviya, Rozhdestvenskii, Sidorkin, Tsamalaidze, Sakhelashvili, Frlez, Poanic, Li, Minehart, Smith, Stephens, Ziock, Bertl, Horisberger, Ritt, Schnyder, Wirtz, Ritchie, Supek, Kozlowski.