ANALYSIS ON THE BEHAVIOR OF PRECIPITATES IN ULTRA-THIN HOT STRIP OF PLAIN LOW CARBON STEEL PRODUCED BY COMPACT STRIP PRODUCTION

This paper investigated the mechanism of precipitation and its influence upon prop-erties of ultra-thin hot strips of low carbon steel produced by CSP techniques using experiment and thermodynamics theory. The experimental results show that there are lots of fine and dispersive precipitates in microstructures. By analysis, most of aluminum nitrides are in grains, while coexisted precipitates of MnS are along grain boundaries. Coexisted precipitates compose cation-vacancy type oxides such as Al2O3 in the core, while MnS is at the fringe of surface. The precipitation behavior of AlN and MnS in the hot strip is studied by thermodynamic calculation. At last, implica-tions between strengthening effect and techniques are analyzed using obtained solubility products.     

激情不息,精彩不止——“福特ST”第十六届风云赛道嘉年华完美落幕

伴随着2015年的第一响钟声,一群从各地齐聚GIC的或熟悉、或陌生的人们,以赛车为伴,在最贴近赛道的地方,用最任性的方式,迎来了全新的一年。在2014年的跨年派对上,不仅有风云赛道嘉年华的传统年菜——6小时耐力赛、精英争霸赛、风云汇等,还有重量级的加盟伙伴——福特ST所呈现的福特ST专属活动。在赛道的舞台上,每辆赛车、每位车手都是跨年派对的主角,他们用速度与激情演绎出非凡的精彩,不论奖杯最终何去何从,只要心中的激情不熄灭,精彩就不会停止。     

Virtual reflected-light microscopy

Research on better methods to digitally represent microscopic specimens has increased over recent decades. Opaque specimens, such as microfossils and metallurgic specimens, are often viewed using reflected light microscopy. Existing 3D surface estimation techniques for reflected light microscopy do not model reflectance, restricting the representation to only one illumination condition and making them an imperfect recreation of the experience of using an actual microscope. This paper introduces a virtual reflected-light microscopy (VRLM) system that estimates both shape and reflectance from a set of specimen images. When coupled with anaglyph creation, the system can depict both depth information and illumination cues under any desired lighting configuration. Digital representations are compact and easily viewed in an online setting. A prototype used to construct VRLM representations is comprised only of a microscope, a digital camera, a motorized stage and software. Such a system automatically acquires VRLM representations of large batches of specimens. VRLM representations are then disseminated in an interactive online environment, which allows users to change the virtual light source direction and type. Experiments demonstrate high quality VRLM representations of 500 microfossils.     

Measurement by vertical scanning profilometry of resorption volume and lacunae depth caused by osteoclasts on dentine slices

The resorption pit assay is classically used to evaluate osteoclast activity on bone or dentine slices that can be eroded by these cells. Two different types of cells were generated from peripheral blood mononuclear cells cultured in the presence of M-CSF + sRANKL or with M-CSF + LPS. At the end of the culture period (21 days), cells were discarded and the dentine slices stained with toluidine blue and examined with an NT9100 Wyco vertical scanning profilometer. The images of the dentine surface were corrected for tilt and the eroded volume was calculated on the whole images. The depth of the eroded pits was determined. The data files were used to reconstruct the surface of the slices by standardizing the ground level to compare both conditions. Osteoclasts generated with M-CSF + sRANKL were capable of resorbing a more important volume than those generated with M-CSF + LPS. In addition, the formers were able to resorb the dentine matrix more deeply. Data provided by the microscope were used to reconstruct three-dimensional images of the dentine slices with pseudo colours varying with the depth of erosion. Vertical scanning profilometry, a technique used to measure the roughness of polished or etched surfaces in metallurgic industry, can be used to accurately measure the eroded volume and the mean erosion depth done by osteoclasts in the resorption pit assay.     

Simple method of determining plasma impedance of streamer discharge in atmospheric air

For atmospheric streamer discharges using a lightning impulse generator, we demonstrate a method of determining the plasma impedance in a streamer region by analyzing the periodic attenuated discharge waveforms having high-frequency components. When the streamer region in the plasma can be treated as an equivalent series circuit model including resistance and inductance elements, the regression waveforms obtained by reducing and smoothing the discharge waveforms are analyzed in the equivalent circuit. We found that the streamer resistance increased exponentially with time after the discharge, whereas the streamer inductance and series impedance were constant at 4.0 Ω for longer than the first period of the discharge waveforms. Moreover, the slope of the regression curve increases more rapidly for the positive streamer resistance than for the negative resistance. Finally, the absolute values of the streamer impedance versus time were 3.3-19 Ω and 3.5-9.0 Ω for positive and negative discharges, respectively.     

Note: ferrule-top atomic force microscope. II. Imaging in tapping mode and at low temperature

In a recent paper [D.Chavan et al., Rev. Sci. Instrum. 81, 123702 (2010)] we have demonstrated that ferrule-top cantilevers, obtained by carving the end of a ferruled fiber, can be used for contact mode atomic force microscopy in ambient conditions. Here we show that those probes can provide tapping mode images at both room and cryogenic temperatures (12 K).     

Development of a high pressure automated lag time apparatus for experimental studies and statistical analyses of nucleation and growth of gas hydrates

Nucleation in a supercooled or a supersaturated medium is a stochastic event, and hence statistical analyses are required for the understanding and prediction of such events. The development of reliable statistical methods for quantifying nucleation probability is highly desirable for applications where control of nucleation is required. The nucleation of gas hydrates in supercooled conditions is one such application. We describe the design and development of a high pressure automated lag time apparatus (HP-ALTA) for the statistical study of gas hydrate nucleation and growth at elevated gas pressures. The apparatus allows a small volume (≈150 μl) of water to be cooled at a controlled rate in a pressurized gas atmosphere, and the temperature of gas hydrate nucleation, T(f), to be detected. The instrument then raises the sample temperature under controlled conditions to facilitate dissociation of the gas hydrate before repeating the cooling-nucleation cycle again. This process of forming and dissociating gas hydrates can be automatically repeated for a statistically significant (>100) number of nucleation events. The HP-ALTA can be operated in two modes, one for the detection of hydrate in the bulk of the sample, under a stirring action, and the other for the detection of the formation of hydrate films across the water-gas interface of a quiescent sample. The technique can be applied to the study of several parameters, such as gas pressure, cooling rate and gas composition, on the gas hydrate nucleation probability distribution for supercooled water samples.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.     

Use of scanning probe microscopy to study the evolution of nanometer sized liquid structures

The evolution of the profile of nanometer sized water drops on a mica surface has been studied through hydration scanning probe microscopy. A time range from a few seconds down to a fraction of millisecond after the formation of the drop has been explored. This high time resolution has been obtained by sampling a series of statistically equivalent drops. This approach also avoids any probe interference during the drop evolution process.