Finite twist and extension of a cylindrical elastic membrane

Summary We consider a circular cylindrical membrane subjected to longitudinal extension and twist. The associated equilibrium deformation is considered to be axisymmetric and the analysis is based on a direct two-dimensional formulation. Wrinkling of the membrane is taken into account in an approximate way by introducing arelaxed strain energy function derived from the neo-Hookean strain energy for isotropic elastic solids. Analytical formulae for wrinkled parts of the membrane are used to corroborate the results of a numerical treatment of the full boundary value problem.Dedicated to the memory of A. C. Pipkin     

The controlling effect of 0.05% hydrogen sulfide gaseous atmosphere on the accelerated fatigue failure of coated MM-002 nickel-base superalloy at 650 °C

A systematic study was carried out aimed at evaluating the environmental effects of H₂S containing environment on the creep-fatigue failure of coated undirectionally solidified MM-002 nickel-base superalloy at high temperature. The cyclic loading conditions were constant and consisted of creep tension and plastic compression following the CP-mode of the strain range partitioning method. The results obtained have shown that although the pack cementation coating used showed adequate resistance under the combination of cyclic loading and oxidizing environments, this resistance was not evident under the H₂S containing atmosphere. In fact, it was found that even an amount as little as 0.05% H₂S had an extremely detrimental effect on the creep-fatigue life of the coated superalloy at 650 °C. The crack initiation and propagation in the H₂S environment was controlled by an aggressive sulphidation attack ahead of the crack tip. This was demonstrated by the formation of low melting eutectic sulfides at the plastic zone ahead of the crack tip, causing an accelerated transdendritic cracking and premature failure.     

Evaluation of a Conical Mill for Screening of Direct Compression Formulations

Suitability of a Quadro Comil^TM for screening of direct compression tablet masses was evaluated with respect to alteration of particle size distribution and blending efficiency. Air jet sieving was qualijied for determination of a particle size of spraydried lactose and microcrystalline cellulose. Using a full 3¹ × 2³ factorial design not only effects of single processing parameters (output screen size, impeller shape, velocity of the mill, and type of powder), but also their respective combinations were investigated in terms of impact on particle size and flow properties (angle of repose, bulk and tapped densities). Particle sizes before and after passing the Comil were found to be normally distributed. The results indicate that the process does not allow any of the powder characteristics studied beyond normal batch-to batch variability. This refers in particular to the proportion of fines. For evaluation of the deagglomeration effectiveness, a 2³ design was implemented with iron oxide as a model drug. Homogeneity of the blends was determined optically, and after screening twice it was found to be acceptable even with this substance, which has a particularly high agglomeration tendency, high density, and small particle size. The Quadro Comil is therefore regarded as fully suitable for deagglomeration of powders in a gentle and effective manner     

Effect of superconducting fluctuations on the nmr relaxation rate of high-T c superconductors

The effect of superconducting order parameter fluctuations on the nuclear-spin relaxation rate, 1/T ₁, is studied for clean two-dimensional systems by calculating the three Maki-Thomson-type diagrams which represent the lowest-order fluctuation contributions to the transverse susceptibility. For Gaussian fluctuations and for temperatures near the mean field transition temperature,T _c0, we employ a weak-coupling theory in which the pair-fluctuation propagator can also include pair-breaking effects. We also go beyond the Gaussian theory and take into account the interactions between Cooper-pair fluctuations corresponding to the fourth-order Ginzburg-Landau fluctuation terms. We compare our results with previous results in the dirty limit and in 3D. We obtain a pronounced peak in 1/T₁ atT _c and briefly discuss possible reasons why this peak is not observed.     

Silicon-substrate microelectrode arrays for parallel recording ofneural activity in peripheral and cranial nerves

A new process for the fabrication of regeneration microelectrode arrays for peripheral and cranial nerve applications is presented. This type of array is implanted between the severed ends of nerves, the axons of which regenerate through via holes in the silicon and are thereafter held fixed with respect to the microelectrodes. The process described is designed for compatibility with industry-standard CMOS or BiCMOS processes (it does not involve high-temperature process steps nor heavily-doped etch-stop layers), and provides a thin membrane for the via holes, surrounded by a thick silicon supporting rim. Many basic questions remain regarding the optimum via hole and microelectrode geometries in terms of both biological and electrical performance of the implants, and therefore passive versions were fabricated as tools for addressing these issues in on-going work. Versions of the devices were implanted in the rat peroneal nerve and in the frog auditory nerve. In both cases, regeneration was verified histologically and it was observed that the regenerated nerves had reorganized into microfascicles containing both myelinated and unmyelinated axons and corresponding to the grid pattern of the via holes. These microelectrode arrays were shown to allow the recording of action potential signals in both the peripheral and cranial nerve settings, from several microelectrodes in parallel     

Airborne scatterometers: investigating ocean backscatter under low and high-wind conditions

Attempting to understand and predict weather on a local and global basis has challenged both the scientific and engineering communities. One key parameter in understanding the weather is the ocean surface wind vector because of its role in the energy exchange at the air-sea surface. scatterometers, radars that measure the reflectivity of a target offer a tool with which to remotely monitor these winds from tower-, aircraft-, and satellite-based platforms. This paper introduces three current airborne scatterometer systems, and presents data collected by these instruments under low-, moderate-, and high-wind conditions. The paper focuses on airborne scatterometers because of their ability to resolve submesoscale variations in wind fields. Discrepancies between existing theory and the observations are noted and the concerns in measuring low-wind speeds discussed. Finally, the application of using this technology for estimating the surface-wind vector during a hurricane is demonstrated     

Demonstration of a semiconductor external cavity laser using a UVwritten grating in a planar silica waveguide

The authors report the first demonstration of a semiconductor external cavity waveguide laser, modulated at 2.5 Gbit/s over 100 km of standard optical fibre using a UV written grating in a planar silica waveguide as the feedback element     

A general interaction analysis for large deformations

A method is presented for the finite element analysis of the interaction of geometrically and materially non-linear bodies. Interaction is considered at predefined interfaces. Equations for interaction forces are assembled via static condensation, and the solution for these forces is utilized for the full analysis of the problem. An interface function using the interpolating functions is defined to maintain the equilibrium of interaction forces and the displacement compatibility at the interface nodes. The method permits large rotations and slipping as well as the occurrence of new contacts at the interfaces. Additionally, solutions can be found using high- or low-order elements and when nodes at either side of the interface are not aligned.     

Cyclooxygenase and lipoxygenase arachidonate metabolites synthesized by mouse peritoneal macrophages: in vitro effect of N-phenyllinoleamide from toxic oil samples

N-phenyllinoleamide (NPLA) has been detected as extraneous compound in adulterated cooking oils associated with a unique epidemic disease known as the Toxic Oil Syndrome (TOS). In this communication we report on the action of NPLA on the endogenous cyclooxygenase and lipoxygenase arachidonate metabolism. Results show that mouse peritoneal macrophages (MPM) exposed to 1 mM NPLA for 2 h undergo significant increases of 6-keto prostaglandin F1a, prostaglandin E2, leukotriene B4, 12- and 15-hydroxyeicosatetraenoic acids. MPM prelabelled with 3H-AA showed an enhanced release when exposed to NPLA. Thus, it is concluded that NPLA potentiates AA release from cell membrane phospholipids and the subsequent cyclooxygenase and lipoxygenase oxidative metabolism of this precursor to various eicosanoids. This is in agreement with the implication of peroxidative process mediated by fatty acids anilides in TOS.     

Comparison of three different methods for measurement of plaque-pH in humans after consumption of soft bread and potato chips

Three different techniques for measurement of plaque-pH--the sampling, the microtouch, and the telemetric methods--were compared after subjects had consumed different starch products. Ten volunteers, equipped with partial lower prostheses, incorporating a miniature glass pH electrode, refrained from toothbrushing for 3 days. Four products were tested: (1) soft bread, (2) potato chips, (3) 5% starch, and (4) 5% sucrose. The pH of plaque was measured for 45 min by means of all three of the methods. The results showed that the mean pH at 10 min was 1.5 units lower with the telemetric than with the sampling method and 1.0 unit lower with the telemetric than with the microtouch method. Relatively small differences were found among the effects of the four test products for all three methods, with the clearest distinctions among the pH curves being with the microtouch and telemetric methods. The main conclusions from the present investigation are: (1) that there were large differences in pH levels measured with the sampling, the microtouch, and the telemetric methods, even though they ranked the test products in about the same order, and (2) that the two starchy foods, bread and potato chips, were both easily fermented by dental plaque.