A vectorial boundary element method analysis of integrated optical waveguides

In this paper, a new vectorial boundary element method is introduced and applied to the modal analysis of dielectric waveguides with piecewise homogeneous refractive indexes. The procedure, which is free of spurious modes, determines the full field distribution from the longitudinal fields at the refractive index boundaries. Singular kernels are evaluated through series solutions while the electric field discontinuity at corners is accommodated through either a grid refinement technique or a semianalytic approach. Our formalism generates propagation constants and modal field distributions for several representative refractive index profiles with far higher accuracy than standard finite-difference or finite-element procedures.     

Integration of solvent extraction and liquid membrane separation: An efficient tool for recovery of bio-active substances from botanicals

An integrated process based on simultaneous solid-liquid extraction and liquid membrane separation is proposed for recovery and isolation of valuable species from botanicals. This integration provides complete exhausting of the solid material even in the case of very low solubility of the specified solute in the extracting solvent. Selectivity of the liquid membrane ensures a preferential transport of the desired solute from the native extract into the strip solution, while the other co-extracted species remain predominantly in the native extract.     

Laser stimulated low-temperature crystallization of amorphous silicon

Laser annealing of amorphous silicon (a-Si) at different initial temperatures (77 and 300 K) has been studied. It is established that the laser-stimulated crystallization of silicon is possible at relatively low temperatures. A theoretical model is proposed, which explains this phenomenon by melting via the electron mechanism followed by recrystallization.     

Kinetics of AuSn4 migration in lead-free solders

The relatively fast diffusion of Au atoms in eutectic PbSn matrix is considered one of the contributing factors to the Au embrittlement problem. In this study, we further investigated the Au embrittlement problem in high-Sn solders. Experimentally, Sn3.5Ag (wt.%) spheres with 500-μm diameter were soldered over the Au/Ni soldering pads. It was found that some of the AuSn₄ needles that formed after reflow inside the solder migrated back to the solder/pad interface during thermal aging. However, the migration kinetics in high-Sn solders was slower compared to that in eutectic PbSn. The difference in migration kinetics of AuSn₄ in eutectic PbSn and SnAg was ascribed to the difference in the magnitudes of the Au flux and the Ni flux. In eutectic PbSn, the Au flux was much greater than that of the Ni flux, and the Au and Ni flux were in the same order of magnitude in eutectic SnAg. The relative magnitude of the Au and Ni flux changed in eutectic PbSn and SnAg because the homologous temperatures of PbSn and SnAg were different.     

Setting-up a cost recovery system for the largest wastewater treatment plant in South-East Asia.

A tariff system has been set up for the largest wastewater treatment plant in South-East Asia, the Samut Prakarn Wastewater Treatment Plant south of Bangkok, which is currently under completion. Fully functional the plant will have a design capacity for 500,000 m3 per day and will service a combined residential and industrial area with approximately 600,000 residents and 2,300 factories. The tariff system, which includes a tariff model, is based on water consumption and BOD load. As background for setting the tariffs a comprehensive monitoring system including an industrial permitting system has been developed. The paper presents the background and rationale for setting up the system as well as the objective, scope and content of the tariff system and the industrial permit system. Further, the feasibility of introducing cost recovery systems, which is widely accepted in developing economies on the conceptual level and to some extent implemented at the legal and regulatory level, but has yet to be implemented at large, is discussed.     

Floc size distribution in a stirred suspension.

This paper focuses on the distribution of alumino-humic flocs found in a stirred suspension. Distributions were scaled using the transformation u = d/dL in which d is floc diameter and dL its arithmetic mean value and fitted by a gamma distribution. Flocs were treated as monofractal with solids mass concentration specified by C = A'rhos (d/do)D-3 in which A' is a packing coefficient, rhos the density of the floc solids, D the fractal dimension and do a reference size. It was shown that the overall solids concentration (M) complies with the dependence M proportional to NA'dDL-S(D) in which N is the number of flocs per unit volume and S(D) a distribution moment. Initial estimates of A' and D were obtained from analysis of floc sedimentation behaviour. From knowledge of the base parameters, the calculated value of M did not match the measured M and varied with shear. This was attributed to a kinematic influence on C over and beyond changes associated with the response of dL to shear. Issues of self-similarity were examined and it was concluded that distributions did not display strict self-similarity. Data are provided on the size distribution found in the flocculators of a treatment works at full scale.     

Yielding- and fracture behaviour of ferritic steels in the transition region of quasistatic to dynamic loading

This paper presents results of investigations on the influence of loading rate on yielding and fracture behaviour of ferritic steels. The range of loading rates was below a certain level at which a special stress wave analysis is required. Concerning the yielding behaviour it was found, that the yield strength can be predicted by the model of thermally activated flow. The strain hardening dσ/dε appeared to be independent of strain rate, if adiabetic heating can be neglected. Concerning the fracture behaviour it is demonstrated that the K_lc-T-curves are shifted to higher temperatures with increasing loading rate. The temperature shift could be correlated with the strain rate sensitivity m = d lnσ/d lnε. The ductile/brittle transition temperature increases with incrasing loading rate. For the upper shelf region crack resistance curves as a function of loading rate are presented. It is shown that the crack length can be determined using the key-curve-method. A slightly increasing tendency of the evaluated J_R-curves was found.