Phase Stability and Optoelectronic Properties of the Bixbyite Phase in the Gallium–Indium–Tin–Oxide System

X‐ray diffraction techniques were used to determine the phase boundaries of the In₂O₃ solid solution phase in the Ga₂O₃–In₂O₃–SnO₂ ternary system. The effects of Ga and Sn content on the unit cell dimensions of the bixbyite phase were calculated by a linear regression fit, the results of which indicate the two substitutive cations have opposite and independent effects on the lattice parameter. These results suggest that the cations do not strongly interact with each other in the crystal. Measurements of optoelectronic properties were also taken on single‐phase bulk specimens within the solid solution to establish their dependence on composition. As anticipated, Sn doping yields corresponding increases in conductivity, reduction in the absolute value of Seebeck coefficient, and increase in optical band gap. In contrast, these properties are not significantly affected by varying Ga content, confirming that Ga behaves as an isovalent dopant at the low doping levels involved.     

Dense Iodoapatite Ceramics Consolidated by Low‐Temperature Spark Plasma Sintering

Pb_9.85(VO₄)₆I_1.7, a potential waste form for long‐lived I‐129 immobilization, experiences phase decomposition and thus iodine loss at an elevated temperature above 400°C, presenting a significant challenge for effective management of radioactive iodine. In this work, we report low‐temperature consolidation of dense iodoapatite pellets with above 95% theoretical density by spark plasma sintering (SPS) at temperatures as low as 350°C for 20 min without iodine loss. Microstructure analysis indicates a nanocrystalline ceramic with an average grain size less than 100 nm. Grain growth dominates the sintered microstructure at higher temperatures and longer durations. The dense nanoceramics have significantly‐improved fracture toughness as compared with bulk coarsened grain structures. The effects of sintering temperatures (350°C, 400°C, 500°C, and 700°C) and durations (0–20 min) on microstructure, density, fracture morphology, and mechanical properties including Young's modulus and hardness of bulk samples were investigated. Low temperature densified iodoapatites suggest immense potential of SPS as an advanced materials fabrication technology for the development of waste forms for immobilization of volatile radionuclides including radioactive iodine.     

Removal of tin from dilute solutions

The fluidised bed cell of inert glass beads is an electrolytic reactor which is designed to provide higher ion‐transfer conditions during electrolysis, thus enabling metals to be removed efficiently from dilute solutions. The effectiveness of the method as a means of removing metals from effluent to meet discharge consent levels is studied for the in situ removal of tin from dilute solution (concentration range 0.25–1.00 gdm⁻³). The results show that the combination of high mass transport conditions and a moderately high electrode surface area per unit electrode volume provides a system for continuous removal of metal from dilute solutions. The effects of acid concentration, tin concentration, current density, fluidised bed agitation, electrode spacing, type of electrode and lead impurities on the removal of tin are reported and expressed in terms of the percentage removal of tin (α_Sn), the efficiency of tin deposition (ϕ_Sn), and the energy consumption (W_Sn) for 1 kg of tin deposited. The results show that tin can, under optimised conditions, be removed from dilute solutions to a residual concentration of 0.001 gdm⁻³. © 2001 Society of Chemical Industry     

The role of surface oxygen on copper metal in catalysts for the synthesis of methanol

Discrepancies in experimental measurements of adsorbed oxygen coverage on copper metal surfaces in working Cu/ZnO/Al₂O₃ catalysts are interpreted in terms of two types of adsorbed oxygen. The first, O(a), is identical with that observed in studies of single‐crystal copper surfaces. The second, O^*(a), not seen in single‐crystal studies, is more strongly bonded to the metal surface. It is suggested that the adsorption sites of O^*(a) contain Zn as well as Cu, from surface α‐brass (copper/zinc alloy) formation during catalyst reduction. Earlier experimental results on O(a) coverages on various supported copper catalysts are re‐assessed. Only catalysts containing Zn (or Ga) gave abnormally high coverages: with other supports, basic or acidic, O(a) coverages are less than ∼0.1. This revised version was published online in July 2006 with corrections to the Cover Date.     

Microcomputers Implementation of Digital Control Strategies for Structural Response Reduction

Abstract: In the past, implementation of active structural control strategies employing PC-based hardware has often been problematic, and there seems to be a need to improve the understanding of the issues associated with implementation of digital control, as well as to reduce the excessive computational times required for I/O processes and calculation of control forces. Recently developed hardware based on dedicated digital signal processing (DSP) chips has offered new possibilities for control algorithm implementation. This paper discusses digital control system concepts and specific practical aspects of digital control implementation, including the use of supervision. Details regarding active structural control using the Texas Instruments TMS32OC30 DSP chip and experimental verification of the hardware performance are given.     

Supercritical CO2 Extraction of Annatto (Bixa orellana) Pigments and Some Characteristics of the Color Extracts

Supercritical CO₂ (SC-CO₂) was used to extract natural food colors from Annatto (Bixa orellana) seeds with different pressures and temperatures. Results from the reverse thin-layer chromatographic separation and GC/MS revealed that SC-CO₂ extracts were composed mainly of bixin, geranylgeraniol and norbixin. Differences in absolute values of solubility parameters (SPD) between these main compounds and SC-CO₂ indicated bixin was more easily extracted than norbixin under conditions used. A higher yield of total pigments was obtained at extraction pressure above 310 bar than at 210 bar and 50°C.     

Climate alteration A global issue for the electric power industry in the 21st century

Development of global electric generation and distribution systems will be central to mankind's economic and social well being. However, electricity is likely to be produced mainly from fossil fuel combustion for the foreseeable future. As a consequence, this global energy sector will contribute to growing carbon dioxide emissions, with a potential for climate alteration. Concern for potentially adverse climate effects has led to consideration of strategies for managing GHG emissions. With present technologies, extreme reduction strategies will be costly and may create significant stress on the projected world economic and energy systems. Technological options have been evaluated to a modest degree. These range from conventional emission control approaches to geo-engineering opportunities and biospheric carbon management. To be practical, these options need to be developed further and demonstrated to properly assess their operational characteristics.