基于“二叉决策树”模型的嵌入式软件调试

在嵌入式软件开发过程中,软件不可避免地会出现各种错误,因此调试是软件生命周期中一个非常重要的环节。针对嵌入式软件开发的流程和特点,对其调试部分进行较为深入具体的研究和探索,提出基于调试器的"二叉决策树"调试模型。该模型描述了嵌入式软件调试的一般过程、调试对象和常用方法。实践表明"二叉决策树"调试模型具有较好的实用性和扩展性。     

ATO包裹硅酸锆的制备与应用

采用化学共沉淀技术制备了锑掺杂二氧化锡(ATO)包裹硅酸锆的导电粉体,对比了该导电粉体与ATO在防静电陶瓷中的应用效果。结果表明与掺纯ATO相比较,掺入ATO包裹硅酸锆的防静电陶瓷颜色比较浅,并且能明显减少氧化锡的用量,当陶瓷的表面电阻为107Ω/□量级时,用ATO包裹硅酸锆作为导电填料可以节省25%左右的ATO。     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。     

The influence of F doping on the activity of PbO2 film electrodes in oxygen evolution reaction

The PbO₂ and F⁻-doped PbO₂ (F-PbO₂) film electrodes have been prepared by an electrodeposition process onto platinum substrate. The changes of their electrochemical activity for oxygen evolution (OE) reaction with accelerated electrolysis time have been studied. The results show that the activity of the electrodes decreases with increasing electrolysis time. This can be attributed to the conductivity variations, which are caused by the decrease of the oxygen vacancy concentration in PbO₂ films during OE. The mechanism of the decrease of the oxygen vacancies has been investigated. For F-PbO₂ film electrodes, though its electrochemical activity is somewhat lower than that of undoped one, its activity stability is much higher in comparison with that of PbO₂. The influence of F⁻ doping on the activity of PbO₂ film electrodes has been also discussed.     

催化剂烧炭再生模拟和分析

催化剂烧炭再生是非定态过程。本文建立了绝热反应器内催化剂烧炭模型,利用移动边界正交配置法求解。以结炭的BO2催化剂再生为工作反应,模拟预测与实验值吻合良好。模拟计算表明,用递升进口温度序列烧炭,使再生时间明显缩短。     

二甲醚燃烧用掺杂钡、镍六铝酸盐催化剂的研究

二甲醚是易液化，便于运输，清洁化的新能源。当作为燃料使用时，采用催化燃烧的方法能使得燃烧的起燃温度降低和提高燃烧转化率，克服了普通燃烧的缺点，实现了清洁燃烧。对二甲醚催化燃烧用的催化剂BaNiAl11O19-δ进行了制备与研究。采用溶胶-凝胶法制备六铝酸盐催化剂BaNiAl11O19-δ,考察其对新能源二甲醚催化燃烧反应的活性，并用TG—DTA对催化剂的性质进行考察。结果表明，加入经800℃焙烧4h后又在1200℃焙烧了2h的催化剂，比未加催化剂的燃烧体系T10降低了50℃。用溶胶一凝胶法制备的六铝酸盐催化剂BaNiAl11O19-δ对二甲醚催化燃烧反应具有较高的催化活性。     

含磷氯和氮的化合物对软质PU泡沫塑料的阻燃作用

较全面地研究了含磷和氯(或氮)的化合物对软质聚氨酯泡沫塑料的阻燃作用,表明:(1)磷与氯或氨复配的协同阻燃效应能明显提高其阻燃效率,当其阻燃剂用量为11%—12%时,PU软泡的阻燃性达到GB10800—89阻燃一级;(2)使含磷氮阻燃基团结合在PU分子中,能降低阻燃剂的逃失性,从而提高材料阻燃耐久性,为阻燃技术的研究指出一条新途径。     

耐磨陶瓷在水泥厂风机陆磨措施中的应用

1 风机的冲击、冲刷磨损特点 煤粉、排尘、引风、吹尘等物料输送型风机冲刷磨损现象比较严重,特别是风机叶轮尤为显著.叶轮的磨损是由速度高达10～150 m/s的气流携带固体粒子和颗粒不断冲击部件表面而造成,其主要磨损的部位为气流入射角90°、60°、30°的冲刷区域.分析认为,叶轮磨损主要有以下二类原因造成.     

二种双邻位甲基取代的聚芳醚酮类树脂的合成与性能

合成二种双邻位甲基取代的聚芳醚酮类聚合物,聚芳醚酮醚酮酮(DM-PEKEKK)和聚芳醚酮酮醚酮酮(DM-PEKKEKK),用FT-IR、1H NMR、DSC、WAXD、TG等技术对其进行表征,研究表明:较之于未取代的PEKEKK和PEKKEKK玻璃化转变温度和溶解性能大幅度提高,热分解温度有所下降,但均在450℃以上.     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.