Distributed database design—Optimization vs feasibility

This paper is concerned with the problem of optimal assignment of data to sites in a distributed relational database. It is shown that in general the optimal allocation will require exponential time in terms of the input. Several heuristic algorithms that can be applied to various constraints and which provide feasible, near optimal results, as well as a model that determines the “best” assignment for a given input out of several optimal and near optimal assignments have been developed. The model is shown to be efficient, to require polynomial time, to be practical in terms of feasible inputs and to achieve assignments with near minimal global and local costs.     

Application of 252Cf-PDMS to characterize airborne particles deposited in an Antarctic glacier

The aim of this study is to apply the (252)Cf-PDMS (plasma desorption mass spectrometry) technique to characterize particles deposited in ice samples. This technique allows identification of molecular ions, even large molecules, desorbed from the sample surface, in contrast with PIXE (particle induced X-ray emission) or EDS (energy dispersive spectrometry). Two shallow snow cores obtained from different glacial drainage basins on King George Island ice cap, South Shetland Islands (Antarctica), were analyzed by PDMS. The chemical compounds identified in the ice mass spectra show that the particle contents of both samples were statistically different, indicating a non-homogeneous spatial deposition distribution for the deposited particles. The analysis of the ice mass spectra suggests some possible sources for the airborne particles. The mass spectra of ice samples collected at a site exposed directly to air masses coming from the Drake Passage show a significant contribution of particles from crustal and anthropogenic sources. However, the mass spectra of ice samples taken from a site on a slope towards a local inlet point out a high influence of marine aerosol. Therefore, it was concluded that particles deposited onto the ice cap were attributable to different aerosol sources, besides long-range atmospheric transport. The (252)Cf-PDMS technique can be considered a powerful tool for studies of snow and ice samples, providing important information for understanding the global atmospheric transport and deposition of airborne particles.     

Should a coal-fired power plant be replaced or retrofitted?

In a cap-and-trade system, a power plant operator can choose to operate while paying for the necessary emissions allowances, retrofit emissions controls to the plant, or replace the unit with a new plant. Allowance prices are uncertain, as are the timing and stringency of requirements for control of mercury and carbon emissions. We model the evolution of allowance prices for SO2, NOx, Hg, and CO2 using geometric Brownian motion with drift, volatility, and jumps, and use an options-based analysis to find the value of the alternatives. In the absence of a carbon price, only if the owners have a planning horizon longer than 30 years would they replace a conventional coal-fired plant with a high-performance unit such as a supercritical plant; otherwise, they would install SO2 and NOx, controls on the existing unit. An expectation that the CO2 price will reach $50/t in 2020 makes the installation of an IGCC with carbon capture and sequestration attractive today, even for planning horizons as short as 20 years. A carbon price below $40/t is unlikely to produce investments in carbon capture for electric power.     

Reducing the energy penalty costs of postcombustion CCS systems with amine-storage

Carbon capture and storage (CCS) can significantly reduce the amount of CO(2) emitted from coal-fired power plants but its operation significantly reduces the plant's net electrical output and decreases profits, especially during times of high electricity prices. An amine-based CCS system can be modified adding amine-storage to allow postponing 92% of all its energy consumption to times of lower electricity prices, and in this way has the potential to effectively reduce the cost of CO(2) capture by reducing the costs of the forgone electricity sales. However adding amine-storage to a CCS system implies a significant capital cost that will be outweighed by the price-arbitrage revenue only if the difference between low and high electricity prices is substantial. In this paper we find a threshold for the variability in electricity prices that make the benefits from electricity price arbitrage outweigh the capital costs of amine-storage. We then look at wholesale electricity markets in the Eastern Interconnect of the United States to determine profitability of amine-storage systems in this region. Using hourly electricity price data from years 2007 and 2008 we find that amine storage may be cost-effective in areas with high price variability.     

Corporate social responsibility for implementation of sustainable energy development in Baltic States

This article analyses the main problems and challenges of corporate social responsibility in energy sector in Baltic States. Development of socially responsible business in energy sector can provide for the implementation of sustainable energy development without state interventions. This voluntary measure implemented by energy enterprises can ensure efficient public–private partnership in achieving sustainable development targets. The analysis of corporate social responsibility development in energy sector of Baltic States is provided and positive impact of corporate social responsibility on sustainable energy development is evaluated.     

Bioconversion of agro‐industrial by‐products to lactic acid using Lactobacillus sakei and two Pediococcus spp. strains

The aim of this study was to evaluate the bioconversion efficiency of rich in cellulose agro‐industrial by‐products such as wheat bran (WB), spent distiller's grain with solids (DGS), brewer's spent grain (BSG) and lupin (Lupinus angustifolius L.) wholemeal fraction (LF) to lactic acid (LA) using acid tolerant lactic acid bacteria (LAB) strains Lactobacillus sakei KTU05‐06, Pediococcus acidilactici KTU05‐7 and P. pentosaceus KTU05‐9. Carbohydrase preparation Depol^? 692L was used for the hydrolysis of non‐starch polysaccharides. Analysed raw materials were suitable substrates for LAB propagation and L‐lactic acid production. The lowest pH (3.6) was found in LF medium after 48 h fermentation with P. acidilactici and P. pentosaceus strains. The lowest pH (3.86) was measured in WB fermented with L. sakei, and in DGS and BSG (pH 3.8 and 3.9 respectively) fermented with P. acidilactici. The highest endoxylanase activity was excreted by the P. acidilactici and P. pentosaceus (84 and 69 XU g^?1 respectively), and the highest α‐amylase activity was of L. sakei (255.6 AU g^?1) after 24 h incubation in WB medium. The L‐lactic acid concentration of 86.11 g kg^?1 was reached after the bioconversion of hydrolysed WB in combination with 48 h fermentation by P. pentosaceus KTU05‐9 strain. LA contents between 222 and 282 mg kg^?1 was produced from lupin processing residues via fermentation using P. acidilactici and P. pentosaceus KTU05‐9 strains. The major challenge within the presented study is the viability of tested LAB in cereal waste media and effective LA production at a low pH (3.6–3.8).     

Reliability-Based Analysis of Strip Footings Using Response Surface Methodology

A reliability-based analysis of a strip foundation subjected to a central vertical load is presented. Both the ultimate and the serviceability limit states are considered. Two deterministic models based on numerical simulations are used. The first one computes the ultimate bearing capacity of the foundation and the second one calculates the footing displacement due to an applied load. The response surface methodology is utilized for the assessment of the Hasofer–Lind reliability indexes. Only the soil shear strength parameters are considered as random variables while studying the ultimate limit state. Also, the randomness of only the soil elastic properties is taken into account in the serviceability limit state. The assumption of uncorrelated variables was found to be conservative in comparison to the one of negatively correlated variables. The failure probability of the ultimate limit state was highly influenced by the variability of the angle of internal friction. However, for the serviceability limit state, the accurate determination of the uncertainties of the Young's modulus was found to be very important in obtaining reliable probabilistic results. Finally, the computation of the system failure probability involving both ultimate and serviceability limit states was presented and discussed.     

An efficient external sorting with minimal space requirement

An efficient external sorting algorithm with minimal space requirement is presented in this article. The average number of passes over the data is approximately 1 +Ln(N + 1)/4B, whereN is the number of records in the file to be sorted, andB is the buffer size. The external storage requirement is only the file itself, no additional disk space is required. The internal storage requirement is four buffers: two for input, and two for output. The buffer size can be adjusted to the available memory space. A stack of size log₂ N is also required.This work was partially supported by a fellowship and grant from Western Michigan University.     

Evaluation of Physicochemical and Antifungal Properties of Polylactic Acid–Thermoplastic Starch–Chitosan Biocomposites

Biocomposites of polylactic acid, thermoplastic starch, chitosan powder, and chitosan lyophilized powder were prepared using an extrusion process. The color, thermal, structural, mechanical, morphology, and antimicrobial properties were evaluated. The addition of thermoplastic starch and chitosan (chitosan powder and chitosan lyophilized powder) produced significant changes in color and heterogeneous surface morphology of the polylactic acid biocomposites. The thermal, mechanical, and morphometric properties of the material showed changes with the addition of thermoplastic starch and chitosan (chitosan powder and chitosan lyophilized powder). The biocomposites formulated with chitosan powder and chitosan lyophilized powder showed antifungal activity when evaluating this property. The biocomposites produced could be used in packaging applications.