Enantioselective Organocatalytic Michael Addition of Cyclobutanones to Nitroalkenes

Synthetic applications of cyclobutanones other than ring expansion and fragmentation reactions are rare. Herein, highly efficient diastereo‐ and enantioselective organocatalytic Michael additions of 2‐substituted cyclobutanone derivatives to nitroalkenes are reported allowing the stereocontrolled creation of ‘all‐carbon’ quaternary centers. The approach relies on both the use of Brønsted base/hydrogen‐bond donor bifunctional organocatalysts, and importantly, the specific stabilization and activation of cyclobutanone with a secondary amide moiety. The reaction was found to nicely accommodate a broad scope of substrates, allowing the control of up to three contiguous stereogenic centers. This work has opened new synthetic opportunities.     

A variable radius roll adhesion test (VaRRAT) suitable for measuring the adhesion of paint to metal

Early trials and analysis of a new adhesion test are discussed. The test is designed for measuring the adhesion of paint to deformable steel sheets as used in building, automotive, and other cladding applications, and does not require detailed knowledge of the paint mechanical properties. A stiff overlay, such as an epoxy resin, is applied to the coating, and the steel substrate is peeled away using a roll of well-defined radius to which the steel substrate is constrained. The propagation of a crack within the paint or at some interface in the paint/metal system depends mostly on the mechanical properties and thickness of the overlay and the radius of the constraining roll. The test is shown to discriminate better than existing practical adhesion tests between paints of expected differing adhesion/cohesion, but also presents some inconsistencies that require further work to resolve. BHP Institute of Steel Processing and Products, Wollongong NSW 2522, Australia.     

Specific cationic photoinitiators for near UV and visible LEDs: Iodonium versus ferrocenium structures

Two iodonium salts based on a coumarin chromophore are investigated for polymerization upon light emitting diode irradiations (LEDs). They work as one‐component photoinitiators. They initiate the cationic polymerization of epoxides (under air) and vinylethers (laminate) upon exposure to violet LEDs (385 and 405 nm). Excellent polymerization profiles are recorded. Their efficiency is quite similar to that of a ferrocenium salt. Interpenetrating polymer networks can also be obtained through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend monomer. The light absorption properties of these new salts as well as the involved photochemical mechanisms are investigated for the first time through electron spin resonance, laser flash photolysis, steady state photolysis experiments. Molecular orbital calculations are also used to shed some light on the initiation mechanisms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42759.     

Densification and grain growth during solid state sintering of LaPO4

This work is devoted to the kinetic study of densification and grain growth of LaPO₄ ceramics. By sintering at a temperature close to 1500 °C, densification rate can reach up to 98% of the theoretical density and grain growth can be controlled in the range 0.6–4 μm. Isothermal shrinkage measurements carried out by dilatometry revealed that densification occurs by lattice diffusion from the grain boundary to the neck. The activation energy for densification (E_D) is evaluated as 480 ± 4 kJ mol⁻¹. Grain growth is governed by lattice diffusion controlled pore drag and the activation energy (E_G) is found to be 603 ± 2 kJ mol⁻¹. The pore mobility is so low that grain growth only occurs for almost fully dense materials.     

Eu-Doped BaTiO3 Powder and Film from Sol-Gel Process with Polyvinylpyrrolidone Additive

Transparent BaTiO₃:Eu³⁺ films were prepared via a sol-gel method and dip-coating technique, using barium acetate, titanium butoxide, and polyvinylpyrrolidone (PVP) as modifier viscosity. BaTiO₃:Eu³⁺ films ~500 nm thick, crystallized after thermal treatment at 700 ºC. The powders revealed spherical and rod shape morphology. The optical quality of films showed a predominant band at 615 nm under 250 nm excitation. A preliminary luminescent test provided the properties of the Eu³⁺ doped BaTiO₃.     

Multicompartment hydrodynamic model for slurry bubble columns

A core-annulus multicompartment two-dimensional two-bubble class model accounting for slurry recirculation and coupled with catalyst transport was developed as a part and parcel of the analysis of the behavior of slurry bubble column reactors at high gas throughputs corresponding to the churn turbulent flow regime. The model analyzed the contributions of bubble-induced turbulence closures, bubble coalescence and breakup phenomena, and catalyst axial distribution as the resultant of sedimentation, advection via liquid-solid slip, per-compartment axial dispersion and core-annulus lateral exchange of catalyst by bubble-induced turbulence. The model was also used to analyze the effects of catalyst loading, gas density and superficial velocity, and column diameter and vessel aspect ratio on the hydrodynamics of slurry bubble column reactors, namely, the per-compartment phase holdups and interstitial velocities, pressure gradient, bubble coalescence and break-up rates, and loci of velocity inversion for the gas and slurry profiles.     

Great enhancement of mechanical features in PLA based composites containing aligned few layer graphene (FLG), the effect of FLG loading,size, and dispersion on mechanical and thermal properties

Four series of polylactide (PLA) based composite films containing horizontally aligned few layer graphene (FLG) flakes of high aspect ratio and adsorbed albumin are prepared. The mechanical and thermal properties varies with percentage, dispersion degree and size of FLG flakes. Great improvement up to 290% and 360% of tensile modulus and strength respectively were obtained for the composite containing high lateral size of FLG at 0.17% wt, and up to 60% and 80% for the composite with very well dispersed 0.02% wt FLG. The composites of PLA and PEG-PLLA containing very well dispersed FLG flakes at 0.07% wt are ductile showing enhancement of elongation at break up to respectively 80% and 88%. Relatively high electrical conductivity, 5 × 10⁻³ S/cm, is measured for PLA film charged with 3% of FLG.     

Maternal Exposure to Dibutyl Phthalate (DBP) or Diethylstilbestrol (DES) Leads to Long-Term Changes in Hypothalamic Gene Expression and Sexual Behavior

Xenobiotic exposure during pregnancy and lactation has been linked to perinatal changes in male reproductive outcomes and other endocrine parameters. This pilot study wished to assess whether brief maternal exposure of rats to xenobiotics dibutyl phthalate (DBP) or diethylstilbestrol (DES) might also cause long-term changes in hypothalamic gene expression or in reproductive behavior of the resulting offspring. Time-mated female Sprague Dawley rats were given either DBP (500 mg/kg body weight, every second day from GD14.5 to PND6), DES (125 µg/kg body weight at GD14.5 and GD16.5 only), or vehicle (n = 8–12 per group) and mild endocrine disruption was confirmed by monitoring postnatal anogenital distance. Hypothalamic RNA from male and female offspring at PND10, PND24 and PND90 was analyzed by qRT-PCR for expression of aromatase, oxytocin, vasopressin, ER-alpha, ER-beta, kisspeptin, and GnRH genes. Reproductive behavior was monitored in male and female offspring from PND60 to PND90. Particularly, DES treatment led to significant changes in hypothalamic gene expression, which for the oxytocin gene was still evident at PND90, as well as in sexual behavior. In conclusion, maternal xenobiotic exposure may not only alter endocrine systems in offspring but, by impacting on brain development at a critical time, can have long-term effects on male or female sexual behavior.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Preparation of Phospholipid Multilayer Patterns of Controlled Size and Thickness by Capillary Assembly on a Microstructured Substrate

By dragging a phospholipid solution on microstructured silicon surfaces, phospholipid molecules are selectively deposited inside the microstructures to get regular phospholipid multilayer patterns of controlled thickness over a large scale (～cm²). By varying the dragging speed, the thickness of the patterns varies between 28 and 100 nm on average (7 to 25 bilayers). Electroswelling of phospholipid multilayer patterns leads to the formation of giant liposomes of controlled size and narrow size distributions.