Local strain measurements of yarns inside of 3D warp interlock fabric during forming process

The final geometry of 3D warp interlock fabric needs to be check during the 3D forming step to ensure the right locations of warp and weft yarns inside the final structure. Thus, a new monitoring approach has been proposed based on sensor yarns located in the fabric thickness. To ensure the accuracy of measurements, the observation of the surface deformation of the 3D warp interlock fabric has been joined to the sensor yarns measurements. At the end, it has been revealed a good correlation between strain measurement done globally by camera and locally performed by sensor yarns. Additionally, sensor yarns located in the two directions of the 3D warp interlock fabric have revealed a different forming behaviour depending on the architecture and the different slope values of the punch.     

Genetic analysis of geraniol metabolism during fermentation

Geraniol produced by grape is the main precursor of terpenols which play a key role in the floral aroma of white wines. We investigated the fate of geraniol during wine fermentation by Saccharomyces cerevisiae. The volatile compounds produced during fermentation of a medium enriched with geraniol were extracted by Stir-bar sorptive extraction and analysed by GC–MS. We were able to detect and quantify geranyl acetate but also citronellyl- and neryl-acetate. The presence of these compounds partly explains the disparition of geraniol. The amounts of terpenyl esters are strain dependant. We demonstrated both by gene overexpression and gene-deletion the involvement of ATF1 enzyme but not ATF2 in the acetylation of terpenols. The affinity of ATF1 enzyme for several terpenols and for isoamyl alcohol was compared. We also demonstrated that OYE2 is the enzyme involved in geraniol to citronellol reduction. Fermenting strain deleted from OYE2 gene produces far less citronellol than wild type strain. Moreover lab strain over-expressing OYE2 allows 87% geraniol to citronellol reduction in bioconversion experiment compared to about 50% conversion with control strain.     

Arylene bisimides with triarylamine N-substituents as new solution processable organic semiconductors: Synthesis,spectroscopic, electrochemical and electronic properties

New solution processable organic semiconductors, consisting of pyrromelitic, naphthalene or perylene bisimide core and triarylamine N-substituents, have been synthesized. All three compounds are electrochemically active and undergo quasi-reversible oxidation and reduction as evidenced by cyclic voltammetry investigations. The oxidation process involves the transformation of the triarylamine substituents into radical cations as proven spectroscopically and spectroelectrochemically. The reduction process occurs at the arylene bisimide core leading to the formation of a radical anion and eventually a dianion in the second step. These findings are in perfect agreement with the DFT calculations which show that in the synthesized molecules the HOMO orbital is located on the triarylamine moiety whereas the LUMO one on the bisimide core. In all molecules studied the electrochemically determined ionization potential (IP) is slightly higher than 5.0 eV whereas in naphthalene and perylene derivatives the electron affinity (EA) is close to ?3.9 eV. These values fulfill the requirements for n-type (electron) semiconductors in air operating n-channel field effect transistors (FETs) as well as for p-type (hole) conductors in p-channel FETs. To verify whether the newly synthesized compounds exhibit the expected electrical transport properties all organic (CYTOP dielectric) test transistors were fabricated. All three semiconductors showed no field effect in the n-channel configuration. To the contrary, they could be used in p-channel FETs showing, in the saturation regime, the hole mobility approaching 10^?4 cm² V^?1 s^?1 – the value which slightly exceeds that measured for low molecular weight, amorphous triarylamine semiconductors.     

Structural purity of magnetite nanoparticles in magnetotactic bacteria

Magnetosome biomineralization and chain formation in magnetotactic bacteria are two processes that are highly controlled at the cellular level in order to form cellular magnetic dipoles. However, even if the magnetosome chains are well characterized, controversial results about the microstructure of magnetosomes were obtained and its possible influence in the formation of the magnetic dipole is to be specified. For the first time, the microstructure of intracellular magnetosomes was investigated using high-resolution synchrotron X-ray diffraction. Significant differences in the lattice parameter were found between intracellular magnetosomes from cultured magnetotactic bacteria and isolated ones. Through comparison with abiotic control materials of similar size, we show that this difference can be associated with different oxidation states and that the biogenic nanomagnetite is stoichiometric, i.e. structurally pure whereas isolated magnetosomes are slightly oxidized. The hierarchical structuring of the magnetosome chain thus starts with the formation of structurally pure magnetite nanoparticles that in turn might influence the magnetic property of the magnetosome chains.     

Proposition of a New Severity Analysis Based on ‘Shake’ Detection: Example of the Vatry Airport Tarmac

In packaging science, the study of transport is important in determining the viability of a package/product pair. Many load breaks occur (e.g. handling and storage) along a supply chain. Transport also generates various physical stresses (e.g. shocks, shakes and vibrations). These physical phenomena can be recorded using a variety of customized sensors (e.g. tri‐axial accelerometers, temperature sensors and pressure sensors). This study focuses on a transport phase that has not been studied in depth to date. Transportation operations on tarmacs include many handling and transportation machines, which are characterized by typical constraints that are often more stringent than airlift phase constraints. For comparison, acceleration distributions were estimated and analysed for the tarmac phase and road phase. Severity indicators were calculated based on existing methods. The second part of this study addresses the study of shakes. The shake distributions at 90 and 95% were another indicator of the shakes' severity and probability of occurrence. These elements allow us to characterize the impact of the tarmac area during air transport.     

Drivers of microbial community composition in mesophilic and thermophilic temperature-phased anaerobic digestion pre-treatment reactors

Temperature-phased anaerobic digestion (TPAD) is an emerging technology that facilitates improved performance and pathogen destruction in anaerobic sewage sludge digestion by optimising conditions for 1) hydrolytic and acidogenic organisms in a first-stage/pre-treatment reactor and then 2) methogenic populations in a second stage reactor. Pre-treatment reactors are typically operated at 55–65 °C and as such select for thermophilic bacterial communities. However, details of key microbial populations in hydrolytic communities and links to functionality are very limited. In this study, experimental thermophilic pre-treatment (TP) and control mesophilic pre-treatment (MP) reactors were operated as first-stages of TPAD systems treating activated sludge for 340 days. The TP system was operated sequentially at 50, 60 and 65 °C, while the MP rector was held at 35 °C for the entire period. The composition of microbial communities associated with the MP and TP pre-treatment reactors was characterised weekly using terminal-restriction fragment length polymorphism (T-RFLP) supported by clone library sequencing of 16S rRNA gene amplicons. The outcomes of this approach were confirmed using 454 pyrosequencing of gene amplicons and fluorescence in-situ hybridisation (FISH). TP associated bacterial communities were dominated by populations affiliated to the Firmicutes, Thermotogae, Proteobacteria and Chloroflexi. In particular there was a progression from Thermotogae to Lutispora and Coprothermobacter and diversity decreased as temperature and hydrolysis performance increased. While change in the composition of TP associated bacterial communities was attributable to temperature, that of MP associated bacterial communities was related to the composition of the incoming feed. This study determined processes driving the dynamics of key microbial populations that are correlated with an enhanced hydrolytic functionality of the TPAD system.     

Renewable thermoplastic multiphase systems from dimer fatty acids,with mineral microfillers

Renewable thermoplastic blends based on polyurethane (TPU) and polyamide (DAPA) obtained from dimers of fatty acids were reinforced with mineral microfillers, surface coated calcium carbonate (CaCO₃) or high aspect ratio talc (HAR), to prepare different micro‐biocomposites systems. The influence of the nature of the filler, the aspect ratio and the filler content (5, 10, and 15 wt %), for different TPU/DAPA ratios (20/80, 50/50, and 80/20 wt %/wt %), were specifically investigated. Differential scanning calorimetry (DSC) and thermogravimetric analyses were conducted to investigate the thermal properties. DSC analyses showed that the addition of CaCO₃ had no influence on the glass transition and the melting temperature of the corresponding composites. Moreover, the morphology and the mechanical properties in the solid state of the different multiphase systems were investigated. SEM observations after tensile tests showed that the best matrix/filler interactions were obtained in the case of the 20/80‐based systems. Uniaxial tensile tests have shown that the addition of HAR or CaCO₃ fillers led to a clear increase of the Young modulus. Micromechanical models based on a two‐phase composite approach, including Mori–Tanaka and Davies models were used to describe the dependence of the elastic modulus on the volume fraction of HAR or CaCO₃ fillers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43055.     

Synthesis and Biopharmaceutical Evaluation of Imatinib Analogues Featuring Unusual Structural Motifs

A convenient synthesis of imatinib, a potent inhibitor of ABL1 kinase and widely prescribed drug for the treatment of a variety of leukemias, was devised and applied to the construction of a series of novel imatinib analogues featuring a number of non‐aromatic structural motifs in place of the parent molecule's phenyl moiety. These analogues were subsequently evaluated for their biopharmaceutical properties (e.g., ABL1 kinase inhibitory activity, cytotoxicity). The bicyclo[1.1.1]pentane‐ and cubane‐containing analogues were found to possess higher themodynamic solubility, whereas cubane‐ and cyclohexyl‐containing analogues exhibited the highest inhibitory activity against ABL1 kinase and the most potent cytotoxicity values against cancer cell lines K562 and SUP‐B15. Molecular modeling was employed to rationalize the weak activity of the compounds against ABL1 kinase, and it is likely that the observed cytotoxicity of these agents arises through off‐target effects.