An improved Wigner Monte-Carlo technique for the self-consistent simulation of RTDs

We present an original approach to including quantum transport into classical Ensemble Monte Carlo (EMC) simulations. The method, based on the Wigner transport equation, is fully self-consistent, and includes impurity and phonon scattering according to the Fermi Golden rule. It is inspired by an approach suggested by Shifren et al. [IEEE Trans. Electron Dev. 50, 769 (2003)], with some major improvements that make possible successful comparison with other simulation techniques and experiments.     

Anisotropy of hygrothermal damage in fiber/polymer composites: Effective elasticity measures and estimates

Measured elasticity moduli of a highly (68%) glass-fiber reinforced epoxy matrix for different amounts of fiber/matrix interface weakening and debonding, due to different hygrothermal ageing stages, are compared to estimated ones. Ultrasonic measurements provide seven of the nine elasticity moduli of the orthotropic material samples, including all the moduli significantly affected by damage. Theoretical estimates combine homogenization modeling techniques and Finite Element (FE) calculations, the latter when the effect of observed partial debonding on effective moduli is to be specified. These estimates are performed under different assumptions for the composite structure, with special attention to the existence of a fiber–matrix interphase. Analytical comparisons for the undamaged composite establish that matching US measurements with estimates cannot be obtained, regardless of the chosen model, without the assumption of an interphase layer of modified resin coating the fibers. This coating resin, when in relevant concentration with regard to literature data about fiber coating thickness, typically conserves the epoxy moduli transversally to the fiber orientation, while, in the fiber direction its moduli approach those of the fibers. The comparison of the US measurements on damaged samples to FE calculations assuming progressive one-directional debonding shows that most of the composite stiffness loss can preferentially be due to an initial interphase weakening, while the fiber/matrix debonding seems more likely delayed to long H-ageing times. This is consistent with physical interpretation of damage by water pooling through silane bridges bonding epoxy to glass. The calculations also provide the effective stiffness, at different damage stages, of the “Undamaged Equivalent Inhomogeneity” for this damaged inclusion type.     

Role of isotope methods in the evaluation of cardiac function in intensive care

Radioisotopic cardiac investigation techniques still have a limited role in intensive care units, mainly due to cumbersome traditional equipment, even if in some cases favourable local circumstances exist, such as the proximity of a nuclear medicine unit or the availability of a mobile gamma camera. Nevertheless, nuclear techniques show a number of interesting features, mainly related to the fact that measurements of cardiac chamber volumes and of their variations can be directly derived from activity counts, without any geometrical hypothesis as it is necessary for other methods such as contrast angiography or echocardiography. The whole cardiac cycle (its systolic part as well as its diastolic part) can therefore be evaluated. In addition, since the blood pool labelling remains stable for a long period after a single tracer injection, continuous monitoring of critically ill patients becomes possible. In this case it is no longer the gamma camera imaging system which may be used but rather a very sensitive miniature detector associated with a computerized data acquisition system, allowing beat-by-beat assessment of cardiac activity. The development of this device raises specific problems related to detection geometry, elimination of extracardiac background and stability of the probe positioning on the patient's thorax, but it is clear that such a system merits its place in an intensive care unit in the near future.     

Asbestos corrosion study in a caustic potash solution at several temperatures

Corrosion of chrysotile asbestos tissue (diaphragm material) was determined at 115–200°C in pressure vessels (1–20 bars). These tests have shown the good shape of this asbestos material for 2000/h with an unchanged solution of potash at 200°C under a 20 bars pressure, and a progressive elimination of the silica when potash solution is renewed and partial destruction of the samples.     

GC/MS profiling of gamma-hydroxybutyrate and precursors in various animal tissues using automatic solid-phase extraction. Preliminary investigations of its potential interest in postmortem interval determination

To quantify gamma-hydroxybutyrate (GHB) and its physiological metabolites, gamma-aminobutyric acid (GABA), 1,4-butanediol (1,4-BD), and gamma-butyrolactone (GBL) in various animal tissues (kidney, muscle, heart, liver, blood, brain cortex, thalamus, hypothalamus, hippocampus, or pons), an original gas chromatographic/mass spectrometric method with a automated solid-phase extraction by Oasis MCX cartridges on a Gilson Aspec Xli was developed. Using such apparatus allowed the limit of detection (LOD) of target compounds to be significantly lowered (LOD: 0.027, 0.025, and 5.7 microg/mL for GHB, 1,4-BD, and GABA, respectively, in 200 microL or microg of sample). After validation of each analytical step, the satisfactory performances of the apparatus in conjunction with the rapidity and ease of the extraction step make it suitable for simultaneous assay of GHB, 1,4-BD, GBL, and GABA. The method was used to test the correlation between GHB levels in tissues obtained at different times after death of male Sprague-Dawley rats and the postmortem interval. Preliminary results show a linear increase of GHB levels in relation to time of death in thoracic blood and central nervous system of animals kept at 15 and 20 degrees C.     

Magnitude and direction of motion with speckle correlation and the optical fractional Fourier transform

The optical fractional Fourier transform (OFRT) in combination with speckle photography has previously been used to measure the magnitude of surface tilting and translation. Previous OFRT techniques used to determine motion have not been able to discern the direction of the tilt and translation. A simple new approach involving use of correlation is presented to overcome this limitation. Controlled variation of the minimum resolution and dynamical range of measurement is demonstrated. It is then experimentally confirmed that if a rigid body's motion is captured by two OFRT systems of different orders, the direction and magnitude of both the tilting and the in-plane translation motion of the body can be independently determined without a priori knowledge. The experimental results confirm the validity of previous theoretical predictions.     

How an Ant Manages to Display Individual and Colonial Signals by Using the Same Channel

Cuticular hydrocarbons are used by some ants to discriminate nestmates from nonnestmates. Every member of the colony bears the same pattern because they are continuously exchanged among nestmates. The postpharyngeal gland (PPG) stores the blend of hydrocarbons and is involved in the distribution of this common mixture. However, some individuals might display individual information on the cuticle (such as a chemical signal of fertility) that must not be mixed within the common pool. We investigated how this paradox is solved in the ant Pachycondyla goeldii by analyzing the nature and localization of colonial and fertility signals. Workers in a queenless condition showed a dominance hierarchy that was correlated with ovarian development. Hydrocarbons from the cuticle and the PPG analyzed by gas chromatography (GC) and identified by GC-mass spectrometry showed a clear discrimination among colonies, supporting the involvement of the PPG in the colonial identity signal. We identified and selected 11 cuticular hydrocarbons that permitted us to discriminate ovarian development classes and that might function as a fertility signal. They allowed clear colony discrimination as well, which suggests that the two signals (the individual signal of fertility and the common signal of colony identity) can be conveyed by the same compounds. However, the hydrocarbons in the PPG did not discriminate among ovarian developmental classes, suggesting that the portion of variation in the cuticular hydrocarbons constituting the fertility signal is superimposed on the signal of colony identity.     

Kinematic calibration of Orthoglide-type mechanisms from observation of parallel leg motions

The paper proposes a new calibration method for parallel manipulators that allows efficient identification of the joint offsets using observations of the manipulator leg parallelism with respect to the base surface. The method employs a simple and low-cost measuring system, which evaluates deviation of the leg location during motions that are assumed to preserve the leg parallelism for the nominal values of the manipulator parameters. Using the measured deviations, the developed algorithm estimates the joint offsets that are treated as the most essential parameters to be identified. The validity of the proposed calibration method and efficiency of the developed numerical algorithms are confirmed by experimental results. The sensitivity of the measurement methods and the calibration accuracy are also studied.     

Eu-Doped BaTiO3 Powder and Film from Sol-Gel Process with Polyvinylpyrrolidone Additive

Transparent BaTiO₃:Eu³⁺ films were prepared via a sol-gel method and dip-coating technique, using barium acetate, titanium butoxide, and polyvinylpyrrolidone (PVP) as modifier viscosity. BaTiO₃:Eu³⁺ films ~500 nm thick, crystallized after thermal treatment at 700 ºC. The powders revealed spherical and rod shape morphology. The optical quality of films showed a predominant band at 615 nm under 250 nm excitation. A preliminary luminescent test provided the properties of the Eu³⁺ doped BaTiO₃.